Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "Corrosive Fluids",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Versatile valve suits many applications from
Connexion Developments, which we summarised at the time by saying "The Shako solenoid valve can be adapted to become: a solenoid valve, a float valve, a pressure relief valve, a pressure reducing valve, a pressure sustaining valve or a swing check
valve".
Several months prior to that,
we featured the news release Compact flowmeter suits corrosive fluids from
Emerson Process Management: "Compact and drainable, the F-series Hastelloy is ideal for providing accurate and reliable flow measurement in harsh operating environments".
In February 2007, we covered the news from SensorsOne
concerning its Level Troll 500 water level data logger
- take a look at Data logger endures sea water
which says: "The Level Troll 500 water level data logger has excellent long-term protection against corrosion, particularly with saline liquids".
Take a look also at the news release from SensorsOne, Level transmitter resists corrosion,
as well as Teflon hose and couplings handle the heat from Kurt Hydraulics,
and Flush transducers handle high-viscosity fluids from SensorsOne.
See also:
Piston pumps promise reliability and flexibility
(December 2006)
FMI pumps are designed for simple and reliable operation and require minimal maintenance, thanks to features such as no valves to clog, leak or service and just one moving part
Bellows sealed valves handle corrosive fluids
(December 2006)
When handling corrosive fluids, not only is valve material compatibility a concern but also the type of stem seal
Pressure sensors are made for corrosive fluids
(November 2006)
Measuring aggressive media directly can lead to a short life for sensors if they have not been designed and tested for use with a corrosive fluid
Centrifugal pumps withstand corrosive fluids
(October 2006)
The new Finish Thompson DB Series of sealless, plastic magnetic drive centrifugal pumps are designed to withstand the effects of corrosive fluids
Magnetically coupled gear pumps are ATEX approved
(August 2006)
Tuthill Pump Group's ATEX approved magnetically coupled external gear pumps for precise dosing and metering are presented in a new full-colour, 6-page brochure
Novel Teflon grade helps pumps meet ATEX
(May 2006)
Someflu uses Teflon PFA C-980 as the material of choice for most components in its range of antistatic pumps
Medical valves covered in catalogue
(April 2006)
80-page catalogue covers range of specialist miniature solenoid and pneumatic valve products for use in medical, biomedical and analytical applications
Catalogue details wide range of valve products
(November 2005)
Asco Scientific has produced a new catalogue covering its comprehensive range of specialist miniature solenoid and pneumatic valve products for use in medical, biomedical and analytical applications
Low-cost counter checks hydraulic oils
(September 2005)
A new low-cost portable particle counter aims to help reduce the cost of maintenance and system downtime caused by contamination of hydraulic oils
Flow meters expand use of Coriolis technology
(September 2005)
A new series of Coriolis flow meters claims an industry benchmark for high accuracy flow measurement in larger line sizes up to 12in, flow rates to 2200t/h and for harsh, corrosive fluids
Choosing the best pump for handling corrosives
(August 2005)
Pumps are a crucial 'component' in most process systems and as a consequence of these tougher demands, pump design and operation is increasingly a focus for development and innovation
Hydraulic pump handles harsh environments
(June 2005)
New from the Water Hydraulics Company, the P1 water pump has a positive displacement of 0.8 and 1.2cm3/rev as standard
Peristaltic hose pump survives sulphuric acid
(April 2005)
The LPP peristaltic hose pump has been used successfully in a sulphuric acid process
Selecting the right solenoid valve
(April 2005)
In this ValveExperts guest article, Tom Rozek of Farmington Engineering offers advice on selecting the right solenoid valve to meet the requirements of a given application
Couplings and hoses boast comprehensive coverage
(March 2005)
Kurt Hydraulics has expanded its offering to include a complete line of couplings and hoses, making Kurt the new alternative in the hydraulics industry
Catalogues answer food industry demands
(October 2004)
WDS' new 'Machine accessories' and 'Stainless steel' catalogues have been created in response to the increasing demands from manufacturers in the food industry for tough and easy-to-clean fittings
Dry solenoid valves ensure total separation
(May 2004)
Asco Scientific has extended its range of valves for use in medical and analytical applications with the introduction of the 283 and 383 series of 'dry' solenoid valves
Tubing pumps require minimal maintenance
(February 2004)
The Ismatec range of tubing pumps offer important advantages over many other pump designs; for example they require minimal maintenance which results in lower operational costs
Compact regulators optimise pressure control
(January 2004)
Compact and sophisticated analytical instrumentation can be installed where space is tight but optimal pressure control is required using GO Regulator miniature pressure regulators
Stainless-steel cleans up in hygenic conveying
(January 2004)
Steel belts are easy to clean in food, beverage, packaging and pharmaceutical applications, and can be made from a number of stainless-steel grades
No maintenance boast for spherical plain bearings
(August 2003)
The new TX series spherical plain bearings are claimed to make maintenance a thing of the past
Hazardous area solenoid valves are ATEX certified
(June 2003)
The NADI range of EExd IIB and EExd IIC hazardous area solenoid valves are now available with ATEX certification
Plungers keep electronic sensors safe from harm
(April 2003)
A new range of mechanical sensing elements can bear the brunt of harsh environments and still accurately transmit positioning data
One-piece design cuts ball-valve costs
(January 2003)
Parker Instrumentation has launched a miniature 12mm ball valve for fluid instrumentation applications
Fluid control solutions for analytical markets
(December 2002)
Asco Joucomatic has created a new division - Asco Scientific - specifically to provide fluid control solutions to the medical, biomedical and industrial analytical markets
Prestress is key to hydraulic torque wrenches
(October 2002)
This article provides further information about the principles behind hydraulic torque wrenches, the various application possibilities, and factors that need special attention when using these tools
Novel proximity sensor offers more distance
(May 2002)
Aerco has been appointed as UK distributor for the Contrinex range of inductive and photoelectric proximity switches
Hydraulic accessories ease maintenance
(April 2002)
The expertise of Elesa-Clayton supplying accessories for the machine tool industry has led the company to introduce a range of specialised items related to hydraulic equipment found on machine tools
Transducer is ideal for monitoring wetted media
(March 2002)
MicroFused Sensors, a division of Measurement Specialties, has a new low cost pressure transducer for medium- to high-volume commercial and industrial OEM applications
Vertical sump pumps withstand aggressive media
(November 2001)
A new range of robust, vertical sump pumps which are designed to withstand aggressive and abrasive media, has recently been introduced by liquids handling specialists Pump Engineering
Ball valve provides high-temp crossover capability
(October 2000)
Parker Hannifin's new 4-way miniature ball valve for the crossover control of two fluid streams has a unique one-piece seat and packing design to eliminate potential leak path problems
Submersible level sensor copes with anything!
(June 2000)
With its latest product range PSM can claim to have a sensor for virtually every level and tank gauging application, even those in the harshest situations
Finish improves wear on ball and gate valves
(May 2000)
An innovation from Plasma and Thermal Coatings Ltd (PTC) which introduces a new surface finish for ball and gate valves used in the petrochemical industry, will set new standards of wear resistance an
Miniature pressure regulators in a small size
(March 2000)
Two GO Regulator miniature pressure regulators, the LG-1 and the back pressure unit LB-1, combine a compact design and small envelope withwith a large choice of mounting and material options