Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "Electronics Manufacturing",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Plastic pumps handle corrosive environments from
Michael Smith Engineers, which we summarised at the time by saying "The DB series pumps offer high working pressure capability which means fluids with a high specific gravity can be easily pumped without the need for impeller trimming".
A few weeks before,
we featured the news release Vibration tester increases displacement from
LDS Test and Measurement: "A new 76.2mm-displacement vibration test system aims to further push the boundaries available to the vibration test engineer".
In November 2007, we covered the news from Firstsight Vision
concerning its Falcon 1.4M100
- take a look at High-speed camera captures crisp images
which says: "The Falcon 1.4M100 delivers 100 frames a second at full 1400 x 1024 pixel resolution".
Take a look also at the news release from Frost and Sullivan, Micro metrology market grows steadily,
as well as Professor receives electronics award from Society of Manufacturing Engineers,
and Recycler urges intelligent streaming of products from Axion Recycling.
See also:
Consulting company gains new expert
(February 2007)
Dr Russell Henke will join Cyon Research's select group of knowledgeable experts on business and technology issues
Mixer makes ready for adhesive application
(November 2006)
The Thinky ARE-250 mixes, disperses and degases materials in seconds to minutes, in a sealed or lid-less container such as a jar, beaker, syringe barrel, or cartridge
Manufacturing director becomes a doctor
(July 2006)
Peter Jefferies, Tecan's Manufacturing Director, has attained a doctorate in advanced manufacturing technology
Wiencek unveils aggressive growth plan
(May 2006)
Don Wiencek is restructuring B and B Electronics Manufacturing Company's engineering and marketing teams to better position the company to meet its aggressive growth strategy
Simonsson and King spearhead laser growth
(May 2006)
Powerlase has appointed Samuel Simonsson as Nonexecutive Director and Chairman of the Board and Anthony King as Chief Executive Officer
Lifetime achievement award for Henke
(April 2006)
Dr Russell F Henke will receive the 2006 CAD Society Lifetime Achievement Award for his life-long dedication to the CAD industry
New board member for energy saving company
(December 2005)
While Power Efficiency's new board member was Executive Vice President of Sales and Marketing for Sanmina-SCI Corporation the company's annual sales jumped from US $60 million US $10 billion
Linescan cameras speed low-light applications
(November 2005)
The Piranha HS series is specifically designed to meet the challenging demands of high speed, low light applications, with up to 100x the sensitivity of comparable standard linescan solutions
MCD exchange standards discussed at Productronica
(November 2005)
At Productronica, the iNEMI and the Association of Connecting Electronics Industries (IPC) will host a session on the implementation and adoption of material composition data (MCD) exchange standards
Tiny DTS uses ball grid array technology
(November 2005)
CIL has worked with the scientific research and advisory centre Cefas to manufacture a data storage tag (DST) for fish that uses the latest double-sided ball grid array technology
Moulded contact products go on show
(September 2005)
Bal Seal Engineering will highlight its new M-Series moulded contact products at upcoming medical device/manufacturing trade shows and conferences
Extensive research spotlights best PCB supplier
(March 2005)
Following a nationwide evaluation of over 100 electronics manufacturing companies, NEE Controls has selected Cambridgeshire (UK) firm Prism Electronics to supply printed circuit board assemblies
Electronic system streamlines fastener supply
(December 2004)
APW is benefiting from major supply chain efficiencies following the introduction of a web-based inventory management system with key supplier Southco
Using training resources without broadband
(November 2004)
SolidProfessor, a San Diego based manufacturer of multimedia training exclusively for Solidworks has released its new network software for corporations and academic institutions worldwide
Modelling software helps preserve American history
(June 2004)
OneSpace Designer Modeling is contributing to the preservation of an American naval legend, the USS Constitution, thanks to the dedication of a long-time user
Patent for manufacturing system
(January 2003)
Machine Vision Products has been granted a United States Patent for its CIMCIS computer integrated manufacturing control and information system
Datalogger keeps 24-hour watch on penguins
(October 2002)
Scientists from Birmingham University will be able to study the movements and behaviour of penguins in the Antarctic thanks to collaboration between the university and CIL
Top prof heads up engineering at Greenwich
(June 2002)
A top engineering professor has been recruited to head the School of Engineering at the University of Greenwich at Medway
Satellite radio design by worldwide collaboration
(April 2002)
Six companies from around the globe worked online in real-time to design, refine and prototype a first-of-its-kind satellite radio boom box in only six weeks using CoCreate's OneSpace Solution Suite
Alarming performance from weighing scales
(March 2002)
Adam Equipment has introduced a new range of industrial weighing scales to suit the needs of a wide variety of industries from building supplies to electronics manufacturing
Camera handles multiple barcodes
(March 2002)
Microscan's latest smart camera, the Quadrus EZ, makes it easier for manufacturers to use 2D symbols to track components and PCBs through the manufacturing process
New SCARA robots feature on web site
(December 2001)
TM Robotics has announced that its new web site is now online and has a section dedicated to TM Robotics' newest products, including the Toshiba Machine TH-250 and TH-350 SCARA robots
More features in electronics manufacturing testing
(November 2001)
The Peak Group has introduced a number of new features to its TestMaster suite of programs, adding comprehensive display, reporting, database, analysis and communications capabilities
New VAR forfor Dataracks 19' equipment racks
(July 2001)
Viasystems and Dataracks today announce the formation of a relationship, which enables Viasystems to act as a value added reseller for Dataracks 19' equipment racks under the Viasystems brand name
Laser printing system for low-cost labelling
(May 2000)
A new low-cost labelling system based on A4 polyester sheets that can be printed on a standard laser printer has been introduced by Mega Electronics