‘en50082-2’
An Engineeringtalk guide
Start with the news release
Meter cuts the cost of flow measurement from
ABB Automation Tech (Instrumentation + Automation) , which we summarised at the time by saying "The cost of electromagnetic flow measurement has been cut by up to 20% with the launch of the FXL4000 (COPA-XL range) flow meter from ABB.".
Several months prior to that,
we featured the news release Source puts high-power equipment to the test from
Schaffner EMC: "The NSG1007-45 is a programmable power source for testing and evaluating high power equipment and appliances.".
In September 2003, we covered the news from Mitsubishi Electric Automation Systems
- take a look at Active harmonic filters keep mains clean
which says: "A new range of active harmonic filters aims to set new standards in fight against distortion and corruption of the mains electricity supply caused by back-harmonics from equipment.".
Take a look also at the news release from Lambda UK, More power to the DIN rail,
as well as Oxygen analyser helps keep boilers burning cleanly from ABB Automation Technologies (Instrumentation),
and Transducers provide an easy-to-use interface from Phoenix Contact.
Latest stories...
Multipurpose drive handles AC and servo motors (February 2002)
KEB has extended its portfolio of inverters with the new Combivert F5- Multi drive range, suitable for both open- and closed-loop operation for AC induction and servo motors.
IR detector meets volumetric gas measurement needs (November 2001)
Det-Tronics' Pirvol is a point-infrared volumetric combustible gas monitor, designed to fill the need for an instrument measuring hydrocarbon in the range of 0 to 100% by volume
More developments to DIN Rail power supply (November 2001)
With the new SL20.310 (24-28V/20 or 25 A) Puls has now issued the latest version of its power supply classic, first introduced to the DIN-Rail market by the Munich-based company five years ago.
New power factor corrected power supplies (July 2001)
Lambda has added three new models to its popular DRP series of DIN-rail mounted power supplies with a 24-28V DC output, and peak power ratings of 144, 288 and 600W respectively
Solid-state relay fits industry standard profile (March 2001)
Carlo Gavazzi's new RP1 series of PCB mounting solid-state relays are designed for all types of applications including motors of up to 5A AC3 rating.
Small and more economic DIN Rail Power Supplies (November 2000)
The new MiniLine switched-mode power supply units, the ML30 and ML50, were developed by Puls in response to significant market requirement for small and more economic lower power units
Signal conditioning modules offer wider input (October 2000)
Eurotherm Limited have strengthened their signal conditioning offering by the introduction of ten new DIN rail-mounted modules for use in process and temperature control systems.
Secondary containment on pressure transmitters (September 2000)
Nobel Systems announces a new range of Hammer-Lug Union oilfield pressure transmitters that offer secondary containment to pre-empt prospective safety rules
Browse by category
- Consultancy and Services (787)
- Machine Building (4645)
- Engineering Design Software (6726)
- Drives, Motors and Controls (3491)
- Small Mechanical Components, Joining, Tools (2090)
- Control and Instrumentation (5233)
- Monitoring, Measurement and Quality (5770)
- Electrical and Electronic Equipment Design (4413)
- Materials and Processing (3063)
- Engineering Industry News, Resources (3607)
- Powertrain Design (3752)
- Capital Equipment (3550)
- Sensors (7530)
- Valves, Pumps, Process Hardware (3804)
