Visit the National Instruments web site

News, references and more on Engineeringtalk

"Gearboxes"...

Dave Wilson

Dave Wilson, Editor, writes:
 

We see from your search that you're looking for information on the term "Gearboxes", and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest. Let me be your guide.
 
Start with the news release Lightweight vibration sensors monitor production from Hansford Sensors, which we summarised at the time by saying "Hansford Sensors' HS-130 is suitable for use where space is limited or where the additional weight would alter the test characteristics". The same day, we featured the news release Legacy products replaced or upgraded from Power Jacks: "Power Jacks can replace or upgrade a wide range of screw jacks, linear actuators and bevel gearboxes originally supplied with brand names other than its own".
 
In February 2008, we covered the news from Anstee Ware Group concerning its Motor repair and certification - take a look at Test rigs upgrade motor repair services which says: "Permanent magnet motor repair and calibration service covers all manufacturers, makes and sizes, and includes the complete overhaul of motors, gearboxes and pumps".
 
Take a look also at the news release from Parvalux Electric Motors, DC motor powers up to 440W, as well as Linear elements handle high loads from HepcoMotion, and Small drives suit external motion control from Lenze.
 

See also:

Measurement system works in dangerous environments (January 2008)
John Crane's Lase-a-lign EX can be used on rotating equipment such as pumps, turbines, compressors, blowers, motors and gearboxes

Deep-spigot gearboxes offer mounting options (January 2008)
The Neugart PLV deep-spigot gearbox range is available now from HMK Automation and Drives

Customisable gearboxes provide mounting options (January 2008)
The G gearbox offers a choice of six standard reduction ratios, ranging from 12.5:1 to 75:1 and can be fitted to either Parvalux or third-party motors using an optional IEC flange mount

Distribution deal reached for gearboxes and pumps (January 2008)
The Comer range is divided in to 21 basic groups, based on the different torques that are to be transmitted to the output shaft, which can vary from 0.5 to 65kNm

Converting from hydraulics to an electric actuator (December 2007)
Micromech Technical Director Stirling Morley debunks some of the myths about electric linear actuators that have slowed their adoption in many applications

Casting system keeps servo windings in place (December 2007)
SEW-Eurodrive uses Araldite epoxy casting systems for embedding the stator wiring in the housings of servomotors its used in automation applications

Brushless servos enable plasma cutting accuracy (December 2007)
System uses three or four SmartMotors, two precision gearboxes and an integrated arc voltage torch-height control system

Investment increases torque tool capacity (December 2007)
A new gear hobbing machine with robotic feeder will help Norbar match demand for increased sales volumes of its Pneutorque pneumatic torque wrenches and Handtorque torque multipliers

Breathers do a double act for protection (November 2007)
Reservoir breathers use two adsorbents to protect system fluids from the deteriorating effects of high humidity and water vapour condensation

Torque motors take new approach to extrusion (November 2007)
Parker torque motor technology is key to a new generation of 'direct drive' extruders

Torque motors are made for extruders (November 2007)
Torque motors for extruders integrate dedicated features that have been especially designed to respond to the specific needs of the plastics and rubber industries

Steppers solve wiring conundrum (November 2007)
NEMA 23 and 34 frame hybrid stepper motors come complete with a terminal block and a choice of cable gland or metal ring connectors

Automatic transmission tackles heavy duties (November 2007)
Transmission system will improve fuel economy and refinement, reduce emissions and provide smooth gear changing with zero torque interruption

Software helps develop magnetic innovations (November 2007)
Magnomatics' designs can feature very large numbers of magnetic poles, with no magnetic symmetry that would allow the scale of the simulation to be reduced

DC motors minimise cogging (November 2007)
Pittman series 8000 motors are available in 53, 56 and 62mm lengths and achieve speeds up to 9020rev/min at continuous torque for standard motors at rated voltages

Precision gearboxes offer lower prices (November 2007)
ZF's latest innovation delivers accuracy and durability that is nearly as high as the WT range, at considerably lower cost

News on the A series bevel helical gearboxes from Bonfiglioli UK Industrial Solutions (November 2007)
Compared to equivalent worm gearboxes, the A05 bevel helical gearbox will offer much higher efficiency, from +12% to +85%, depending on the gear ratio

Permanent magnet motors switch standards (November 2007)
The provision of both IEC B14 and NEMA standard flanges and shafts means permanent magnet motors can meet both European and North American demands

Software upgrade provides boosted database (November 2007)
The ServoSoft v2.8 release includes a design aid titled, 'Guidelines for Sizing Cables, Filters and Fuses'

Gearbox guide showcases 25 models (November 2007)
Ondrives can handle special requirements for mechanical gearboxes, no matter how large or small

Consumables branch opens in Nigeria (November 2007)
Wyko Nigeria will offer industrial consumable products from leading manufacturers, as well as the ability to draw immediately upon the group's stocks located throughout Europe

Catalogue eases gearbox specification (November 2007)
Gearbox catalogue has been completely redesigned with many new technical aspects highlighted and added to ease selection of ordering for customers

Stainless motor cleans up on spud preparation (November 2007)
Stainless steel motor offers numerous benefits in addition to its inherent rust resistance

Powerful stepper motors provide compact solution (October 2007)
Tamagawa's TS3218 series flat hybrid stepper motors can provide a powerful miniature positioning solution in a very restricted space

Gearbox service provides 24-hour coverage (October 2007)
MB can strip, repair and manufacture gearbox parts at any time of the day or night

Condition monitoring as an insurance policy (October 2007)
The latest condition monitoring systems and services will reduce the risk and costs associated with unforeseen breakdowns to production plant and machinery, says Kate Hartigan

30-year old actuators receive refurbishment (October 2007)
Continuously operating ABB actuators can perform maintenance-free for long periods, making them ideal for industries such as power generation

CAD service released for motor components (October 2007)
Rotalink aims to provide a 3D space model file within 24 hours that details all the essential mechanical and electrical interfacing information for the recommended product

Geared servomotors offer large torque range (October 2007)
The size of the MC servomotor range allows design engineers to exactly match the drive to the load and achieve optimum machine performance

Light gearboxes high power (September 2007)
Weighing only 3kg, the G63 series combines excellent power, weight and strength characteristics

25 ton gearboxes produced for steel mill (September 2007)
Renold Gears' 25 ton gearboxes have a huge tooth thickness to withstand in excess of 530,000Nm of static torque

Automation project completed for sewage facility (September 2007)
The hoists and chains were replaced with threaded rising stems, operated by Rotork IQ Pro Model 35 actuators and IB7 bevel gearboxes

Small motors handle tough jobs (September 2007)
MC series Mini Motors are available with output power of up to 180W and speeds from 17.5 to 373rev/min in nine different gear ratios with a maximum of 9Nm output torque

Motor provides power boost (September 2007)
The Rosync KM65 motor is available with both single and three-phase winding

 

Send us a blank email now to get the Editor’s free regular email newsletter.
News by product category
News headlines today
News by manufacturer
Engineeringtalk Home Page