Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "IEC1131",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Remote terminal unit has more processing power from
Converteam, which we summarised at the time by saying "Powerful new processor technology enhances the T5000 range of remote terminal unit equipment".
Several months prior to that,
we featured the news release PLC training seminar has comprehensive coverage from
ICP DAS USA: "ICP DAS USA has decided to offer a comprehensive PLC training seminar, open to the readers of Engineeringtalk".
In June 2005, we covered the news from B and R Industrial Automation Corp
concerning its System 2003
- take a look at Control system serves as remote I/O
which says: "The B and R System 2003 can be used as both a complete control system as well as a remote I/O system for the expansion of industrial PCs and controllers from all B and R System families".
Take a look also at the news release from Sensor-Technik UK, Read about measurement technology and CANbus,
as well as Advantage gained from machine control in a box from Delta Tau UK,
and Programmable controller follows CAN standards from IFM Electronic.
See also:
Practicality rules when choosing a servo bus
(October 2002)
The increased take-up of servo systems in all areas of manufacturing and process industry has inevitably resulted in a rise in the use of fieldbuses to synchronise multi-axis motion control
Controllers take GPS data onboard
(September 2002)
The Seriol range of programmable telemetry controllers uses GPS satellite data to provide positional information and accurately synchronise time
Pre-formed cabling and more cuts safety costs
(October 2001)
A new range of compatible system integration hardware to complement the ICS Triplex range of 'Trusted' critical control and safety systems is designed to cut costs for OEMs and system integrators
The benefits of IEC1131 with inverters and servos
(November 2000)
Available free from Lenze is a new CD which explains the innovations of using IEC1131 programming languages with inverter and servo drives
Modular controller handles almost any requirement
(November 2000)
OpenLine Controllers feature a powerful 586 microprocessor, capable of stand-alone operations or communication with PCs and other controllers using Modbus TCP protocol running over TCP/IP network
I/O modules for telemetry control
(March 2000)
Micro Technic A-S introduces a new line of distributed I/O control modules, the Micronix I/O product line
New line of CE-marked BitbusT-modules
(March 2000)
Control and supervision in industrial environments with a new line of CE-marked BitbusT-modules