Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "Image Processing Software",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Infra-red camera spots material stresses from
Cedip Infrared Systems, which we summarised at the time by saying "The Altair Li system can be used to rapidly determine the material's fatigue limit and provide information on the damage mechanism involved".
A few weeks before,
we featured the news release IR camera studies pipe temperature from
Cedip Infrared Systems: "In order to simulate and study the behaviour of hot fluids in pipes the CEA developed two test rigs that use the Silver 480M camera to measure pipe wall temperatures".
In August 2007, we covered the news from Firstsight Vision
concerning its CC320
- take a look at Vision system provides timing control
which says: "Firstsight Vision's CC320 can handle component sensing, camera triggering and reject gate control".
Take a look also at the news release from Cedip Infrared Systems, IR camera chosen as teaching tool,
as well as Image processing software updated from Materialise,
and IR cameras feature removable lens interface from Cedip Infrared Systems.
See also:
Lighting controller meets GigE standard
(February 2007)
The PP520 from Gardasoft Vision provides full control of LED lighting for machine vision applications
Camera tackles demanding thermography
(August 2006)
IR camera combines proprietary high performance cooled indium antimonide staring focal plane array detector with the latest ROIC technology
Smart camera builds vision applications
(August 2006)
The Sony XCI-SX1 Smart Camera under the Microsoft Windows XPe operating system is compatible with National Instruments NI Vision Builder for Automated Inspection software
Thermal imager tackles demanding tasks
(May 2006)
The new Silver 660M is designed for demanding users who need to perform thermal imaging at high spatial resolution with leading-edge sensitivity and accuracy - all at an affordable price
Upgrade for 3D image processing
(May 2006)
ScanIP offers an extensive selection of image visualisation, processing and segmentation tools to process any volumetric 3D data
Infra-red cooled camera for thermographic analysis
(March 2006)
Infra-red cooled camera provides a complete acquisition and processing system for highly dynamic phenomena and high frequency periodic excitation
Three join industrial vision association
(December 2005)
Three members have joined the UK Industrial Vision Association reflecting the broad appeal the association has within the vision industry
Infrared camera shows slag build-up at power plant
(November 2005)
Westar Energy has found a better way to 'see through flames' in monitoring for slag problems in three boilers that drive generators at its electricity generating plant in St Marys, Kansas, USA
IR camera has flexibility for research uses
(October 2005)
The SILVER 450M from Cedip Infrared Systems has been designed for the most demanding users of thermal IR camera technology
Smart camera simplifies machine vision
(September 2005)
The XCI-SX1 has been introduced to meet the increasing demands in smart cameras which are currently seeing the highest growth rates within the machine vision market
Thermal imaging turns to slag detection
(August 2005)
A novel slag detection system combines the latest thermal imaging technology and almost 60 years' experience of the steel industry to control slag carry-over from furnace to ladle
Imaging technologies on show at Photonex
(August 2005)
Alrad will use Photonex 2005 (5th and 6th October at Stoneleigh Park, Coventry UK) to launch a host of new products on stand number C27
Novel IR camera offers speed and sensitivity
(April 2004)
Silver is a new generation of IR camera based on high performance cryogenically cooled staring array detectors
New UK source for image processing software
(October 2003)
Image processing software developer Realviz has signed Cheshire-based Multitech to handle its five core products in the UK
Mathcad aids image analysis
(August 2003)
From cancer cells to UFOs, Advanced Digital Imaging Research uses Mathcad to analyse images
Infra-red sensors keep SARS virus in check
(May 2003)
Following the need to restrict the spread of the SARS virus, Land Instruments International has produced a human body temperature monitoring system
X-ray imaging on show at Farnborough
(July 2002)
X-Tek Industrial showed its new Venlo self-contained cabinet X-ray imaging system for the first time in the UK at the Farnborough Air Show
Portable thermal imaging at an affordable price
(December 2001)
The new Land Cyclops PPM+ hand-held imager combines high performance thermal imaging with accurate temperature measurement and good ergonomic design - all at an affordable price
Developments in spray-nozzle technology
(October 2001)
What are the principal factors which affect nozzle performance? How can a nozzle be designed to provide optimum performance? What's new in nozzle design? Beesh Zytynski has the answers
New catalogue on material testing extensometry
(June 2001)
RDP Howden has just introduced a new catalogue of extensometry products including the range of electronic models plus new video image processing systems offering both standard and multipoint options
Thermal imaging kit aimed at cement industry kilns
(August 2000)
ThermaScope from Thermoteknix Systems is destined to revolutionise thermal imaging within the cement industry and establish itself as the next generation of kiln camera