
Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "NEMA",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Three-phase stepper is a smooth runner from
Astrosyn International Technology, which we summarised at the time by saying "Three-phase layout enables the stepper motor to provide very quiet, smooth motion as well as high accuracy, with a step angle of 1.2 degrees".
A couple of weeks before,
we featured the news release Servo drives combine reliability and flexibility from
Control Techniques: "The Digitax ST range has been designed to provide lean manufacturing environments with smaller, more flexible machinery".
In January 2008, we covered the news from QuickSilver Controls
concerning its DMX512 serial protocol
- take a look at Servomotor controller receives new protocol
which says: "The DMX frame contains 512byte of data to control such things as lighting dimmers, fog machines and QuickSilver's servomotors".
Take a look also at the news release from AutomationDirect, Wire suits machine builders and installations,
as well as Tiny sensors boast longer ranges from Turck,
and Steppers solve wiring conundrum from McLennan Servo Supplies.
See also:
High-speed actuators suit varied applications
(November 2007)
The Extrak's speed greatly increases the application versatility of the actuator, allowing the fastest index times for users along stroke lengths that extend to 7.6m
Permanent magnet motors switch standards
(November 2007)
The provision of both IEC B14 and NEMA standard flanges and shafts means permanent magnet motors can meet both European and North American demands
Industrial PC provides mounting flexibility
(November 2007)
The SealTouch-15 has an Intel Celeron M 1.5GHz processor with 512Mbyte DDRAM, a 40Gbyte hard drive, integral Ethernet and a 15in touchscreen display
Catalogue eases gearbox specification
(November 2007)
Gearbox catalogue has been completely redesigned with many new technical aspects highlighted and added to ease selection of ordering for customers
Panel computer offers high performance.
(October 2007)
The APC 3x15 unit is available with either an Intel Core2 Duo or Core Solo CPU with clock speeds up to 2.33GHz
Motor controller suits miniature applications
(October 2007)
The EZHR17EN gives precise positioning, acceleration and velocity capability to any stepper motor that is NEMA size 23 or smaller
Motors combine accuracy and power savings
(October 2007)
Control algorithms combine the accuracy, precision and power savings of traditional servomotors with the higher torque and lower cost of traditional stepper motors
Level transmitter suits hazardous applications
(October 2007)
K-Tek's SureShot 140XP laser level transmitter suits dry bulk solids, opaque liquids and slurries in challenging environments
Motor combination saves energy
(October 2007)
Flender Motox geared motors have been combined with 1LA7/1LG4/1LG6 Siemens IEC motors and the range includes energy-saving and explosion-proof versions
Flat monitors suit industrial applications
(September 2007)
Nematron M-series industrial flat panel monitors have a compact profile, making them ideal for installation in harsh environments for factory automation and demanding commercial applications
Hybrid stepper motors suit precise positioning
(September 2007)
MAE hybrid stepper motors can provide holding torques of between 8.7Ncm and 1425Ncm, depending on the model chosen
Integrated drive produces high speeds
(September 2007)
OEM Automatic's integrated drive has a three-phase stator with four-pole rare earth magnet rotors with a skewed design to reduce motor cogging
Software improves workplace collaboration
(September 2007)
The Wonderware Development Studio provides a unified environment for the collaboration of IT and engineering teams
Power alert improves electrical safety
(August 2007)
The UPA power alert is hard wired to the circuit breaker or other disconnect devices and pre-verifies from the outside of the control panel or enclosure that full electrical isolation exists
Pressure transmitter handles abrasive media
(August 2007)
The Hammer Union pressure transmitter is designed to provide long life in harsh oil patch environments in applications such as mud logging, cementing, fracturing and acidising
Motor controllers cut installation costs
(August 2007)
Users of Rockwell Automation's new ArmorStart distributed motor controllers benefit from lower installation costs, reduced engineering times and ease of maintenance
Servomotor handles 2000 rev/min
(August 2007)
With QCI's ability to handle inertial miss-matches of 100:1, the QCI-A23K-3 is ideal for driving large flywheel loads without additional gearing
Thermometer improves manufacturing consistency
(August 2007)
Raytek's XR infra-red thermometer reduces energy costs by allowing tighter process control and more efficient process heating
Large display shows data at long distances
(August 2007)
The LDSS six-digit display can be viewed from virtually anywhere on the plant floor
News on the NEMA PC from Noax Technologies Corp
(August 2007)
Industrial 12-inch industrial TFT displays offer a resolution of 800 x 600 or 1024 x 768 (SVGA/XGA), guaranteeing good readability even under very poor conditions
Splitters give new junction box options
(July 2007)
Turck's M8 picofast splitter combines two M8 picofast or two M12 eurofast connector branches into one M8 connector
Integrated coil added to solenoid valves
(July 2007)
An integrated coil is the latest in Parker Fluid Control Division's range of flexible production options for the 204 and 304 solenoid valves
304L stainless air motors released
(July 2007)
Gast 's stainless steel air motors are suitable for applications including drum mixing equipment; food and pharmaceutical packaging, and pumps, turntables and choppers
Board-only servo controller/driver released
(July 2007)
The board only SilverDust IG (QCI-D2-IG-01) is a combined controller/driver which includes serial communications
Stepmotor offers smooth microstepping
(July 2007)
Mclennan Servo Supplies' i-Stepmotor offers smooth microstepping speed performance with zero position loss
Air motors receive new approvals
(July 2007)
Meeting the ATEX standard means Gast's air motors can now work in ambient temperatures up to 135C
Heavy duty monitors suit industrial applications
(July 2007)
AutomationDirect's Atlas LCD colour monitors are equipped with 100-240V AC input power supplies and NEMA 4/4X/12 panel-mountable front bezels
Motor drive offers speed and smoothness
(July 2007)
The Danaher Motion P7000 stepping motor drive is suitable for single or multi-axis applications that demand high-speed performance or low-speed smoothness
Industrial Ethernet switches
(July 2007)
Lantronix' XPress-Pro SW series includes a complete line of five and eight-port managed and unmanaged hardened Ethernet switches
Industrial computer offers quick release system
(July 2007)
The ToughCube's quick release mounting system allows for fast replacement of the core computer
Light gears offer high strength
(July 2007)
The Posiplan PH and BPH shaft-mounted range of gearboxes employs the planetary stages at the input end and the helical stage at the slower, higher torque output side
System reduces arc flash risks
(July 2007)
VoltageVision (R-3W) from Grace Engineered Products is now an easy option on all Allen-Bradley Engineered Motor Control centres
Panel PC enables intuitive operator interfaces
(July 2007)
Flat panel computer combines the latest AMD Geode processor with a wide selection of touchscreen LCDs and I/O expansion modules
Flowmeter monitors gases
(June 2007)
Tabs provide rapid cross-stream mixing to remove swirl and velocity problems, creating a smooth, fully developed flow profile for accurate measurement

