Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "Protection Equipment",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Machine monitoring equipment connects to Ethernet from
Sensonics, which we summarised at the time by saying "The DN36 Spyder range of machine monitoring and protection equipment can be connected to any Ethernet network to provide remote monitoring via standard internet tools".
A few weeks before,
we featured the news release UPS leadership award presented from
Chloride Power Protection: "The 2006 Frost and Sullivan Award for Vertical Market Penetration Leadership among UPS manufacturers serving various data centre sectors has been presented to Chloride Power".
In April 2007, we covered the news from Chloride Power Protection
- take a look at Acquisition expands industrial UPS expertise
which says: "Chloride has acquired Masterpower, a leading supplier of critical power protection solutions in the UK focused on the petrochemical and power generation sectors".
Take a look also at the news release from SMAC Europe, Hybrid actuator puts air over electric,
as well as Burning topic for flame resistant clothing from SATRA Technology Centre,
and Scanner is approved for hand and arm protection from Siemens Automation and Drives.
See also:
Manufacturing growth fuels sales increase
(November 2006)
Esab sales in the six months to 30th June 2006 totalled GBP 414.8 million, an increase of 19% on the corresponding six months in 2005
New S300 smallest device of its type in the world
(July 2006)
Laser safety solution offers power, compactness and flexibility
UPS replacement guarantees essential supplies
(July 2006)
A novel turnkey UPS replacement service enables users to ensure uninterrupted business continuity by not only conducting a thorough site audit but also by swapping out obsolete equipment
Air range meets revised standard
(April 2006)
Breathing air range removes contaminants through an integrated filtration and desiccant dryer that ensures the pressure dewpoint of the air is low enough to prevent liquid water from forming
Assessing the performance of hearing protection
(January 2006)
a panel of leading experts at the 2006 conference of the National Hearing Conservation Association will address the question of assessing the performance of hearing protection devices in the field
Three more pocket safety cards from IMCA
(November 2005)
Three additional pocket safety cards are being offered by IMCA: 'Confined spaces can be deadly'; 'Workplace Safety Self Assessment'; and 'Stay Safe at the Wheel - Cutting and Grinding Safety'
How to work at height in compliance with the WAHR
(November 2005)
Stuart Cameron, managing director of working at height specialist, The Access Group, talks about the Work at Height Regulations, and what employers need to do to avoid falling foul of them
Pre-assembled enclosures save time on-site
(October 2005)
Spelsberg offers a complete assembly service that provides enclosures ready with a wide range of drilling, milling, fitted cable entries, glands and populated with any number of component items
Welding accessories featured on CD
(September 2005)
Personal protection equipment together with other health/safety and general welding accessories are the main highlights of a new CD available from Murex Welding Products
Mobile welding show is off to Ireland
(September 2005)
The Esab Demobus will visit a number of locations in Ireland during October 2005, including Dublin, Cork, Limerick and Galway
HSE publishes revised PPE guidance
(August 2005)
The Health and Safety Executive (HSE) has published a revised version of its guidance designed to help employers who supply and use personal protective equipment (PPE) at work
Mobile exhibition centre hits the road
(May 2005)
Esab is taking its 'Demobus' mobile exhibition centre on the road to various locations around the UK from Tuesday 14th June to Tuesday 28th June 2005
BSI to have major presence at Fire Expo
(May 2005)
BSI will be on stand G30 at the International Fire Expo 2005 from 16-19 May at the NEC, Birmingham
Low-cost solution guards access to hazards
(April 2005)
The PA4600-BB entry/exit access guarding device features a simple 'one-box' design with an operating range up to 8m and response time as low as 16ms
Polycarbonate is lightweight alternative
(December 2004)
New safety shoes from leading personal protection equipment supplier Bacou-Dalloz have toecaps injection molded in Lexan EXL polycarbonate
Software cuts down raw material wastage
(November 2004)
The adoption of JIT and Kanban methods within any manufacturing organisation calls for high flexibility and speed of response from production departments
Patented technology to help locate firefighters
(May 2004)
Officials at Survivair have announced that the company has concluded an agreement with Summit Safety to develop and market a firefighter locating system based on Summit's patented Pulse technology
Product brochures to take away in Chinese
(March 2004)
Amot has produced its first control valve product brochures in Chinese, to support the company's office near Shanghai and its increased activity in the region
Monitors keep watch via Ethernet
(February 2004)
Sensonics has chosen Maintec 2004 to launch two new monitors: the DN36 Spyder range of machine monitoring and protection equipment and the new SpyderNet plug in and play monitor
Fastening solutions for glider dolly production
(October 2003)
Glider safety and protection equipment is the latest application area to benefit from the strength and security of Protex over-centre latches
Marine welding on show
(May 2003)
Esab is to make its first appearance at this year's Seawork exhibition at the Canary Islands Fruit Terminal within the ABP Port of Southampton from 17th to 19th June
Diagnostics system can cut plant downtime
(March 2003)
Phoenix Contact has chosen the Drives and Controls Exhibition to showcase the DiagNet diagnostic system, which dramatically reduces downtime due to faults and failures on industrial installations
Superior protection comes to hand
(December 2002)
In an initiative to improve welding operator safety, Murex Welding Products has released new gloves, riggers and gauntlets
Transient surges - the hidden problem
(December 2002)
Nathan Briggs, Technical Managing Director at Advance Galatrek explores why mains transients are the scourge of modern commerce and industry
Positioning with precision
(October 2002)
SKF Engineering Products has unveiled a range of positioning solutions for high precision industries
Growth for US personal protective equipment
(August 2002)
The well-established personal protection equipment (PPE) market continues to throw up new challenges and unique opportunities for manufacturers wishing to boost sales
Smart labels keep tabs on cathodic protection
(April 2002)
BAC Corrosion Control has a new identification system that can be incorporated into cathodic protection equipment and test facilities to retain and manage information and data
Cathodic protection system under development
(February 2002)
BAC Corrosion Control has been awarded a specialist subcontract by Daelim Industrial of Korea for the design, supply, testing and commissioning of a cathodic protection system
Free Uninterruptible Power System offer at website
(November 2001)
Pluginpower.com, the e-commerce branch of leading power quality management solutions provider Advance-Galatrek, is offering a free UPS with every fifteenth order placed at its Web Site
Manufacturers data updated wit electrical software
(July 2001)
Following a major update, the new software from Amtech will provide specifiers, consultants, designers and OEMs with the latest data on the Eaton range
Compact remote management DC rectifier
(June 2001)
Advance-Galatrek has revealed its new GDC 50-33 DC rectifier, aimed specifically at vital 24/7 installations in critical telecoms, mobile and Internet applications
Power Protection company staff pass rail course
(May 2001)
Four members of staff from Advance-Galatrek have just passed the latest Personnel Track Safety course for Railtrack, entitling them to work on equipment located at the trackside
Half price on-site battery testing service
(May 2001)
Advance-Galatrek is offering half price rates on its Nationwide on-site battery testing service during July and August; the two-month concession reduces the cost of the service to only £75
Power Protection supplier in running for award
(May 2001)
Advance-Galatrek, the UK's leading supplier of Power Protection equipment in the telecoms, IT, industrial and commercial sectors, has reached the finals of the Electrical Products Awards 2001