Visit the Flir Systems web site

News, references and more on Engineeringtalk

"Servomotor"...

Dave Wilson

Dave Wilson, Editor, writes:
 

We see from your search that you're looking for information on the term "Servomotor", and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest. Let me be your guide.
 
Start with the news release Cantilever axes provide precise positioning from Festo, which we summarised at the time by saying "Axes are based on an open platform design that allows OEMs and system integrators to use either a Festo servo or stepper motor, or the motor and controller of their choice". Earlier in the week, we featured the news release Gear actuator facilities precise vehicle testing from Heason Technologies Group: "Heason had to develop a compact, zero backlash, precision gear actuator which would allow ABD to offer higher rotation speeds while providing exceptionally smooth motion".
 
In February 2008, we covered the news from Nord Gear concerning its Nordac SK500 inverter - take a look at Frequency inverters help reduce motor size needed which says: "Nord Gear frequency inverters can allow low-cost AC motor equipment to be used in place of much more expensive motion controller and servomotor based automation".
 
Take a look also at the news release from Aerotech, High-speed rotary stage offers spindle alternative, as well as Servo/encoder combo provides precision positioning from Marchant Dice, and Motion control eases automotive manufacturing from Baldor UK.
 

See also:

Servomotor connectors save more space (January 2008)
Replacing two circular connectors, the robust Cm2 series of low-voltage connectors are ideal for small servomotors in applications where space is at a premium

Online program eases coupling choices (January 2008)
To select the right CD coupling, the system designer simply enters the coupling size or max torque capacity and the two bore sizes

Servo drives incorporate Ethernet communications (January 2008)
The Aries drives offer the added benefits of auto-tuning, drive set-up and full real-time diagnostics, all via the Ethernet PowerLink network

Servo drives combine reliability and flexibility (January 2008)
The Digitax ST range has been designed to provide lean manufacturing environments with smaller, more flexible machinery

Compact servomotor connectors (January 2008)
ITT Cannon's Cm5 servomotor connectors have a low-profile design that makes the devices suitable for small servomotors requiring higher power in applications where space is at a premium

Goniometer stages prevent backlash (January 2008)
Aerotech's ANT-20G goniometer stages have a curvilinear direct-drive brushless servomotor that provides cog-free smoothness, solid in-position stability and zero backlash performance

Servomotor controller receives new protocol (January 2008)
The DMX frame contains 512byte of data to control such things as lighting dimmers, fog machines and QuickSilver's servomotors

Timing belts improve robotic reliability (January 2008)
The red GEN III belt requires no lubrication, is very quiet running and is effectively maintenance-free after installation

Servomotors increase power ratings (December 2007)
Both synchronous and asynchronous motor ranges gain new models that increase the top-end power and torque capacities by half

Servo drives turn to cutting systems (November 2007)
Application guide targets designers involved in all aspects of continuous processing machinery in metal processing, plastics, paper or other material converting industries

Servo drives receive Ethernet connection (November 2007)
System design and machine installation times are reduced with inexpensive Ethernet cabling for the interface between the servo drive and the motion controller

Linear axes provide just the right size (November 2007)
Schunk's B60 linear axis size is intended for economical axis applications with high demands on dynamic and smooth running

Motion controller allows easy integration (October 2007)
Up to two MicroMotion modules can be connected to the VersaMax Micro controller for a total of four independent MicroMotion axes

Servo driver offers easy setup (October 2007)
First-time users can make their EZSV10 DC brush servo driver move intelligently in usually less than half an hour

Small motors suit medical applications (October 2007)
Minimotor's LM1247 contains a metal cylinder filled with permanent magnets that moves concentrically inside the stator, resulting in a miniature linear motor with a powerful, dynamic performance

Motor suits single-axis control (October 2007)
The KFM 05 is aimed at medium-precision motion and speed control applications where full servomotor based systems would be unnecessarily expensive

Geared servomotors offer large torque range (October 2007)
The size of the MC servomotor range allows design engineers to exactly match the drive to the load and achieve optimum machine performance

Servomotor system suits a range of machinery (September 2007)
The Lexium motion controller is sufficiently powerful to require no other PLCs for many applications

News on the MCS and MUS servomotors from Lenze-ACTech (September 2007)
Both the standard size MCS and compact MUS ranges are available with current ratings to match the PositionServo drive range and output ratings to suit a wide variety of applications

Precision stages boost accuracy (August 2007)
M-122 stages can be driven with the low-cost, networkable, C-862 Mercury servomotor controller/driver

Couplings provide high torsional stiffness (August 2007)
Zero-Max' CD couplings are designed with new clamp style hubs for increased torque capacity on shafts without using keyways

Servomotor handles 2000 rev/min (August 2007)
With QCI's ability to handle inertial miss-matches of 100:1, the QCI-A23K-3 is ideal for driving large flywheel loads without additional gearing

Power supplies handle a range of currents (August 2007)
A continuous rated torque of 5.5Nm at a speed of 3500rev/min can be realised by the JH4-0860-61 motor

Drive removes the need for a brake (July 2007)
The HLD is supplied with an Animatics SmartMotorT, an integrated servomotor with inbuilt drive and servo controller

Board-only servo controller/driver released (July 2007)
The board only SilverDust IG (QCI-D2-IG-01) is a combined controller/driver which includes serial communications

Servomotors offer high power density (July 2007)
The HDP range of asynchronous servomotors has exceptionally high dynamic performance, using a light rotor with small diameter to minimise inertia

Servo sensors promise precision feedback (June 2007)
Servomotor feedback systems feature a simple design that increases reliability and uptime while reducing power consumption

Power transmission module provides extra contacts (June 2007)
A working voltage of 830V makes Harting's Han CD power transmission module also suitable for servomotor applications

Nanotranslation stages improve positioning (June 2007)
Improved crossed-roller bearings and 40MHz encoder processing give Aerotech's new ANT-LX nanotranslation stages twice the resolution and speed capability of their predecessor

Couplings provide reliable operation (June 2007)
CD couplings provide the ideal combination of high torsional stiffness and high dynamic load capacity to ensure reliable machine operation

Ethernet compatibility simplifies motion control (June 2007)
Ethernet-Powerlink compatible hardware has substantially reduced the hardware and wiring on a new variant of Harland's Mercury labelling system

Right-angled gearheads offer high power density (June 2007)
LPK+ gearheads are suitable applications where economic efficiency is a top priority

Addon expands servo controller I/O (May 2007)
Breakout provides access to power, communications and I/O lines on SilverDust servomotor controllers

Servomotor controller allows I/O sharing (May 2007)
QuickSilver Controls' SilverDust IGC makes it easy and inexpensive to create a scalable, multi-axis network

 

Send us a blank email now to get the Editor’s free regular email newsletter.
News by product category
News headlines today
News by manufacturer
Engineeringtalk Home Page