‘Silicon Carbide’
A Engineeringtalk guide
Start with the news release
Niton has detector for alloy analysers from
Niton UK, which we summarised at the time by saying "Faster testing speeds and improved analytical performance are provided by a detector for the Niton XLT3t alloy analysers launched by Niton UK.".
Several months prior to that,
we featured the news release Absopulse releases RWY 65 DC/DC converter from
Absopulse Electronics: "The RWY 65 Series fully encapsulated DC/DC converter from Absopulse Electronics generates 500W output power from a 153 x 72 x 269mm enclosure. ".
In November 2008, we covered the news from POSIC SA
- take a look at Posic unveils inductive microcoil sensor
which says: "Posic has presented the PO2211, an inductive position sensor for the measurement of gears, discs and linear bands. ".
Take a look also at the news release from POSIC SA, Posic releases the PO2211 sensor ,
as well as F1 floodlights utilise Hylec connectors from Hylec-APL,
and Michael Smith launches micro annular gear pumps from Michael Smith Engineers.
Latest stories...
Absopulse releases 200W DC/DC converter (October 2008)
Absopulse Electronics' RWR 212 is a 200W DC/DC converter for electronic equipment used on railway rolling stock and other extreme environments.
Pipe plugs provide solid stability (October 2008)
The Pipestoppers division of Huntingdon Fusion Techniques has developed a new range of expandable steel- and aluminium-based pipe plugs to include double length and double seal versions.
Barden irons out problems with obsolete bearings (September 2008)
Robin Kyte, sales manager at Plymouth-based bearings manufacturer The Barden Corporation (UK), explains why bearing obsolescence is so important when it comes to safety-critical applications.
Orthos techniques overcome mesh binding problems (September 2008)
Orthos has unveiled a combination of ultrasonic and air mesh-cleaning techniques, introduced for Allgaier reciprocating tumbler screens in ultra-fine screening applications.
Pros and cons of displacement measurement (September 2008)
Chris Jones, managing director at precision sensor manufacturer Micro-Epsilon UK, compares the technical pros and cons of four types of non-contact displacement measurement technologies.
New range of accelerometers from Kistler (September 2008)
The range of single axis K-Beam capacitive accelerometers from Kistler Instruments covers a measuring range from 2g to 100g in five models with the option of unipolar or differential output.
Accelerometer takes signal conditioning onboard (August 2008)
MEMS device is packaged in a rugged aluminium housing that makes it ideal for transportation and instrumentation testing.
Five-axis tools calibrated in 3D (August 2008)
Test system achieves submicron accuracy without the intricate and painstaking procedures of traditional machine alignment and setup methods.
Further reading
-
European project investigates silicon carbide
Ceram has re-enforced its position as a leading innovator within the European community through its significant involvement with the SOLSiC project.
-
Long life for silicon carbide heating element
A new grade of silicon carbide heating element has been launched by furnace heating specialist Kanthal.
Categories
- Consultancy and Services (879)
- Machine Building (4,320)
- Engineering Design Software (6,010)
- Drives, Motors and Controls (3,182)
- Small Mechanical Components, Joining, Tools (1,902)
- Control and Instrumentation (4,888)
- Monitoring, Measurement and Quality (5,205)
- Electrical and Electronic Equipment Design (4,022)
- Materials and Processing (2,832)
- Engineering Industry News, Resources (6,047)
- Powertrain Design (3,430)
- Capital Equipment (3,269)
- Sensors (6,701)
- Valves, Pumps, Process Hardware (3,509)
