Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "Stepper Control",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Controller handles four axes from
Delta Tau UK, which we summarised at the time by saying "Delta Tau's Turbo PMAC Clipper controller provides a minimum of four axes of servo or stepper control with 32 general-purpose digital I/O points".
A few weeks before,
we featured the news release PLCs suit small automation systems from
Vipa UK: "VIPA, the leading German manufacturer of innovative PLC and PC based automation systems has introduced two low-cost, compact PLC's with fixed I/O based upon its ultra-fast SPEED7 processor technology".
In February 2007, we covered the news from Adlink Technology
concerning its PCI-8144
- take a look at Stepper control card helps build complex systems
which says: "Cost-effective four-axis stepper motor control card offers precise synchronisation across all axes to ensure simultaneous starts and stops for accurate motion of complex systems".
Take a look also at the news release from AMCI, Stepper motor drives encompassed by Allen Bradley,
as well as Pumps offer precise dual channel fluid control from Integrated Dispensing Systems,
and Two heads are better than one from Fluid Metering.
See also:
Industrial pump delivers low volumes with accuracy
(January 2004)
The IDS-2000ARH is an industrial dispensing pump for production and process applications requiring maintenance-free, precision, low-volume fluid control
USB interface aids distributed motion control
(November 2003)
Baldor has a new family of USB-capable motion controllers compatible with the Mint language
Pump provides precision fluid control
(September 2003)
The Model STRH provides precision fluid control in analytical and process instrumentation
Pump provides precision fluid control
(July 2003)
The FMI Model STRH pump is designed for precision fluid control in analytical and process instrumentation
One-box solution controls seven axes
(June 2003)
A novel all-in-one motion automation solution offerers control for three servo and four stepper motor axes, together with onboard I/O and fieldbus connectivity
Servos and steppers join web-enabled control
(May 2003)
Inmoco is providing enhanced facilities for machine control over the Internet with the introduction of new high performance servo and stepper control modules
Intelligent three-axis stepper motor drive
(May 2002)
Baldor has released an intelligent three-axis drive for stepper motors, incorporating a high-performance motion controller which runs the multitasking Mint motion language
Stepper-motor-driven pumps resist chemicals
(March 2002)
Integrated Dispensing Systems has a range of high-precision stepper-motor-driven pumps with ceramic and fluorocarbon fluid paths
Tiny new DIN-rail mounting motion controller
(July 2001)
Trio Motion Technology has packed four axes of servo or stepper control into a tiny new DIN-rail mounting motion controller measuring just 107mm x 182mm x 53mm
New power-supply unit for stepper control system
(June 2001)
A new 300 VA CE-compliant power-supply unit has been introduced by SmartDrive for use with the company's recently introduced Taranis DSP-based stepper-motor control system
Cost effective and compact stepper controller
(December 2000)
The PVP152 is a microprocessor based single axis stepper control board with an integral bipolar chopper drive, having an adjustable motor output current of up to 1 Amp per phase
DSP technology widens prospects for stepper drives
(June 2000)
This article shows how the latest DSP (digital signal processing) technology has been exploited in a new generation of direct digitally controlled stepper drives
Servo/stepper control from encoder specialist
(May 2000)
OEMs and end-users can now create a wider range of cost-effective, PC-based motion control systems thanks to the expansion of Encoder Technology's series of encoder interface cards
Motor driver kit with stepper control ICs
(May 2000)
Allegro MicroSystems has introduced a motor driver kit to aid designers in developing microcontroller-based stepper-motor control systems
6-axis servo or stepper control from bookcase unit
(February 2000)
The AMC B control is a bookcase mounted control for up to 6 axes of either stepper or servo motors
The PCI motion board with more I/O
(February 2000)
This I/O-rich PCI motion board delivers complete machine control solutions - drives rotary/linear motors, cuts TTM for packaging, electronic, CNC, robotics - high-level language and Windows support