Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "Stepper Motors",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release Precision servos expand motion control options from
Total Motion Systems, which we summarised at the time by saying "Servomotor range covers continuous torque from from 0.1 to 44Nm, with peak values up to three-times continuous rating, powered by a range of analogue and digital drives".
Earlier in the week,
we featured the news release Three-phase stepper is a smooth runner from
Astrosyn International Technology: "Three-phase layout enables the stepper motor to provide very quiet, smooth motion as well as high accuracy, with a step angle of 1.2 degrees".
In January 2008, we covered the news from JVL Industri Elektronik
- take a look at Servo and stepper models ease system design
which says: "System designers can now download dimensionally correct CAD models of steppers and servomotors from the JVL website".
Take a look also at the news release from Total Motion Systems, Website receives motion control upgrade,
as well as Servos shrink to smaller square frames from Baldor UK,
and Steppers solve wiring conundrum from McLennan Servo Supplies.
See also:
System provides good images of small objects
(November 2007)
The camera develops a large depth of field as optical magnification is minimal, meaning that 3D object images are 'sharp' on all surfaces
Powerful stepper motors provide compact solution
(October 2007)
Tamagawa's TS3218 series flat hybrid stepper motors can provide a powerful miniature positioning solution in a very restricted space
Stepper motor offers easy automation
(October 2007)
The EZStepper stepper motor controller and driver combination is designed to be bolted onto the back of the stepper motors that it controls
Motors combine accuracy and power savings
(October 2007)
Control algorithms combine the accuracy, precision and power savings of traditional servomotors with the higher torque and lower cost of traditional stepper motors
Small stages are big on precision
(September 2007)
Brochure presents a variety of compact and subcompact positioning stages, featuring submicron to subnanometre precision and closed-loop position feedback
Servo drive toughens up for military COTS duties
(September 2007)
Hardened drives can now be used to control rotary and linear motors/actuators in military applications and extreme industrial environments
Stepper motor offers installation options
(September 2007)
The SD17060B stepper motor drive is a direct replacement for the SD17060, retaining the standard wiring connectors and mounting pattern. d
Electronic lock cuts power needs
(September 2007)
The SQLM Squiggle motor lock module is designed to drop into existing lock or latch assemblies, allowing lock manufacturers to reduce the size and power requirements of their electronic locks
Hybrid stepper motors suit precise positioning
(September 2007)
MAE hybrid stepper motors can provide holding torques of between 8.7Ncm and 1425Ncm, depending on the model chosen
Driver handles wide stepper motor range
(September 2007)
The MD2S-P is a conventional step and direction input stepper motor drive while the MD2S-D is a digital speed control version
Stepper motors cut costs
(September 2007)
Festo's CMMS-ST controller and EMMS-ST stepper motor combination delivers up to 6.5nm torque and speeds up to 2000rev/min
Stepmotor offers smooth microstepping
(July 2007)
Mclennan Servo Supplies' i-Stepmotor offers smooth microstepping speed performance with zero position loss
Motor drive offers speed and smoothness
(July 2007)
The Danaher Motion P7000 stepping motor drive is suitable for single or multi-axis applications that demand high-speed performance or low-speed smoothness
Stepper drives handle a wide current range
(July 2007)
The RTA stepper drive range covers motor phase currents from 0.6A/phase up to 14A/phase with motor bus voltages from 24 to 240V DC
Stepper motors offer high output torque
(June 2007)
The H3 stepper motor features larger diameter, sealed ball race bearings with an improved bearing retainer and O-ring design to provide higher axial and radial shaft loading
Stepper motors suit industrial machinery
(June 2007)
Astrosyn International Technology's P305 is an innovative, compact unit that provides both power and driver functions from a simple AC supply
Stepper motors incorporate internal drivers
(May 2007)
The Sanmotion F series of stepper motors with internal drivers offers reduced and simplified wiring together with easy, compact installation
Positioning stages offer long lifetimes
(May 2007)
The ATS115 is Aerotech's smallest side-sealed, hard cover positioning stage and is based upon a tried and tested protection system
Actuators boost productivity and precision
(May 2007)
LMA/LMAC actuators include dual sealed linear motion guide bearings and robust chain type cable management for a complete positioning solution
Unipolar stepper motor offers 8kg of thrust
(May 2007)
A new unipolar stepper motor from Astrosyn can produce over 8kg of thrust over a linear movement of 7mm
Low-cost positioners don't compromise on accuracy
(April 2007)
Economy positioners combine a rugged steel body with an integrated precision ball screw and bearing guide
News on the Portescap Disc Magnet Stepper Motors from Danaher Motion
(April 2007)
Portescap, a provider of miniature and specialty motors, recently received the Supplier Award for excellent performance from Sick
Drives combine linear and PWM amplifier technology
(March 2007)
Aerotech's new Ensemble CP/MP/CL intelligent drives seamlessly combine linear and PWM amplifier technology for brushed and brushless servos
New wafer handler for safe loading
(March 2007)
McBain Instruments introduces new wafer loader for microscopy
News on the CT hybrid stepper motors from Danaher Motion
(March 2007)
The improved performanceof the CT series of hybrid stepper motors has been achieved by improved stator, neodymium iron boron magnets that guarantee optimum torque density
Quality-assured motion control in Hanover
(February 2007)
Huco Dynatork will be showing a wide selection from its range on Stand F24 in Hall 25 at the forthcoming Hanover Messe
Production system provides hands-on experience
(February 2007)
Middlesex University has installed a Festo MPS 500 modular production system at its Trent Park campus, providing students with hands on experience that will benefit them in the workplace
Universal drives offer high precision
(February 2007)
Technosoft has released the IPS210 high-precision, fully digital minidrive intelligent universal drives, based on the MotionChip DSP control technology
Stepper motor improves safety and efficiency
(February 2007)
Agile Systems' new stepper motor technology will help companies turn simple, low-cost, two-phase stepper motors into sophisticated servo motors
Programmable relays control stepper motors
(January 2007)
A pulse output function to simplify stepper motor control and serial protocol support for easier interfacing are among the new facilities of Easy 800 programmable relays
News on the Stepper motors with a sealed front shaft from Astrosyn International Technology
(January 2007)
Customised stepper motors with a sealed front shaft are available from motion control specialist Astrosyn International Technology
Tables cut the cost of positioning systems
(December 2006)
Modular positioning tables provide extremely cost effective manual and motorised positioning solutions for medium precision manufacturing and research applications
Miniature stepper boasts precision and torque
(November 2006)
EMS has the latest miniature stepper motor from Arsape, a member of the Faulhaber Group, and leader in high-precision micromechanical stepper motors
NET-based automation simplifies integration
(November 2006)
Aerotech offers a range of NET enabled motion and machine control solutions