Dave Wilson, Editor, writes:
We see from your search that you're looking for information on the term "Thermal Analysis",
and we have a large number of manufacturers' news releases and technical articles here on Engineeringtalk which will be of interest.
Let me be your guide.
Start with
the news release IR cameras adopt common vision interfaces from
Flir Systems, which we summarised at the time by saying "First ever thermal cameras to be GigEVision and GenICam compatible and to feature a trigger/synchronisation capability".
A few weeks before,
we featured the news release Near-infra-red camera broadens coverage from
Cedip Infrared Systems: "Broader spectral response is particularly important for applications requiring high sensitivity at infra-red wavelengths out to 2.5um".
In November 2007, we covered the news from Cedip Infrared Systems
concerning its Altair software suite
- take a look at Software suits demanding thermal analysis
which says: "A library of analysis tools enables thorough analysis of recorded image files or real-time imagery".
Take a look also at the news release from Samtech, FEA suite receives update,
as well as On-line thermal imaging cameras monitor processes from Impac Infrared,
and Calculation software gets into (worm) gear from Mitcalc.
See also:
Casting software goes on show in Dusseldorf
(April 2007)
Visitors to ESI Group's stand at the GIFA foundry trade show in Dusseldorf, Germany will get a comprehensive overview of the rapid developments in the area of casting process simulation
Casting solutions showcased in Germany
(April 2007)
ESI Group's casting team will present new ProCAST and QuikCAST solutions at the GIFA International Foundry Trade Fair, to be held in Dusseldorf from 12th to 16th June 2007
Software provides thermal analysis
(March 2007)
ThermaCAM Reporter 8.1 fully integrates Word-enabling features such as spell-check and font selection to be used
Fluid dynamics software investigates stresses
(February 2007)
Flomerics' EFD.Pro now supports Wildfire 3 as well as an integrated interface with Pro/Engineer Mechanica for structural analysis
Mechanical test rigs put composites on trial
(February 2007)
Brookhouse is now better equipped to carry out comprehensive testing of both incoming raw material and manufactured composite components
Upgrade of multiphysics simulation software
(February 2007)
Version 3.3a of leading multiphysics simulation environment runs on Microsoft Vista, supports Chemkin file importation and has an extensive material library
Phantom flight simulator is meaningful diversion
(October 2006)
CD Adapco will be sponsoring an F-4 Phantom flight simulator for delegates use at the COE Aerospace and Defense Industry Workshop in Wichita, Kansas
Upgrade for foundry simulation package
(September 2006)
Finite element software package for foundry simulation offers additional meshing and processing features, as well as improvements in product performance
Modular system maintains rack integrity
(September 2006)
Compact integrated security package complements rack cabinets for mission critical applications where continuous system availability is essential
Thermal analysis software adds video option
(August 2006)
With the release of Thermalyze version 4.5, OptoTherm now gives users of its thermal imaging analysis software the ability to create thermal imaging videos in AVI format
Analysis software supports all major IR cameras
(May 2006)
Thermoteknix analysis software now supports all the major infra-red camera brands, including all Flir Systems, Inframetrics, Agema, Avio and of course, Thermoteknix
Motor cooling software upgraded
(April 2006)
Features added to aid the modelling process for motor cooling software include a material database and improved transient graphing methods for comparing the difference between transient simulations
More connections for rapid flow modelling
(March 2006)
Third release in one and a half years of rapid flow modelling and thermal analysis engineering software for engineering designers introduces CAD connections for Pro/Engineer, Solidworks and UGS' NX
Thermal management of LED lighting modules
(December 2005)
Managing temperatures using appropriate packaging materials is essential to ensure the reliability of high-power LED applications, explains James Stratford of Universal Science
Heat exchangers put on trial
(October 2005)
Recent upgrades to the calorimetric heat exchanger test rig at Young Calibration have expanded the scope of testing to high performance Formula 1 and truck engine heat exchangers
Software helps relentless quest for innovation
(September 2005)
UGS Corp has released Version 4 of NX software, the latest release of the company's comprehensive software solution for digital product development
Engineering labs honour former heads of department
(September 2005)
Last week the University of Surrey honoured three professors and former heads of department in a lab naming ceremony at the Materials Institute Laboratories in the School of Engineering
IR cameras suit medical device manufacturing
(August 2005)
At Medtec Ireland 2005 Flir Systems will show its latest-generation cameras ideally suited to the medical device manufacturing environment
Measurement seminar features expert lineup
(August 2005)
Mettler Toledo is holding an advanced technology and applications seminar focusing on instrument innovations, developments in measurement methods and real world applications
Seminar focuses on crystallisation processes
(July 2005)
Mettler Toledo is holding an application seminar focusing on the technologies required to develop robust crystallisation processes
Lab upgrade adds to support options
(January 2005)
Mettler Toledo has refurbished its demonstration and applications laboratory at its Leicester headquarters
Thermal imager tackles industrial tasks
(December 2004)
The IR928 is a lightweight, high-sensitivity thermal imaging camera using the latest uncooled microbolometer array technology now available from Armstrong Optical
Software optimises automotive brakepipes
(October 2004)
TEA Pipe is a novel vertical application for CatiaV5 dedicated to piping and tubing simulation for placement of pipes in engines and cars
Sensor aids thermal analysis
(August 2004)
The MultiStar HSS7 sensor offers highly sensitive thermal analysis measurements
Package speeds thermal image analysis
(August 2004)
A new version of the ever popular ThermaCAM Researcher package provides digital image and data acquisition up to a maximum rate of 750Hz
Advanced design analysis enters the mainstream
(June 2004)
Cosmos 2005 is billed as the first product group to put advanced design analysis capabilities such as nonlinear analysis and drop testing into an affordable, easy-to-use mainstream application
Survey reveals lack of design integration
(May 2004)
Flomerics has recently completed a survey of physical/mechanical design engineers in the electronics industry that identified some of their major concerns
Package puts CFD to work on PCB thermal analysis
(April 2004)
Iceboard is a novel board-level thermal validation tool for printed circuit board designers
CAD models switch to thermal analysis
(February 2004)
Icepro 4.0 is a model clean-up tool for electronics cooling analysis that makes it easy to convert any CAD model into an efficient thermal model
Mechanical engineers appreciate thermal PCB addon
(February 2004)
In a recent survey, 84% of mechanical engineers in electronics companies approved Flomerics' latest software concept, FLO/PCB
Top resolution from thermography workstation
(February 2004)
The Altair advanced thermography workstation is designed to meet the thermal analysis requirements of the most demanding scientific, process control and nondestructive testing applications
IR camera gets to the foot of the problem
(February 2004)
The new ClimaCool2 ventilation and cooling system is the latest technology in sports shoes from Adidas, and a ThermaCAM SC3000 thermal imaging camera played a pivotal role in proving its design
Thermal analysis automation offer
(November 2003)
Mettler Toledo is running a special thermal analysis automation offer, combining a DSC or TGA together with a sample robot and the new XS balance
Thermal software makes sense of mechanical CAD
(October 2003)
The version of Flotherm allows parts and assemblies from mechanical CAD packages to be imported directly in their native file formats, and then simplified for reliable thermal analysis