Click Here

‘Thermocouples’

An Engineeringtalk guide

Start with the news release Pepperl+Fuchs announces remote I/O systems from Pepperl+Fuchs GB, which we summarised at the time by saying "Designed to facilitate the connection of traditional input and output signals onto a bus network, Pepperl+Fuchs has introduced the LB/FB remote I/O systems.". Several months prior to that, we featured the news release SKF systems boost uptime of Isis neutron choppers from SKF UK: "SKF rolling bearings and condition monitoring systems are maximising the uptime of precision devices used in the Isis neutron and muon source at the Rutherford Appleton Laboratory in Oxfordshire.".
 
In October 2009, we covered the news from Endress+Hauser - take a look at Endress+Hauser releases temperature transmitters which says: "Endress+Hauser has invested in upgrading its temperature transmitters and introduced terminal heads and displays in order to provide a cost-effective temperature package. ".
 
Take a look also at the news release from Celsum Technologies, Celsum controller allows range of input signals, as well as Quadtemp2000 logger has reading rate up to 4Hz from MadgeTech, and Pulsar III infrared thermometer monitors reactors from LumaSense Technologies.
 

Latest stories...
Infrared furnace camera doubles-up as PM inspector (July 2009)

The Flir GF309 is a portable infrared camera designed to inspect furnaces, but it can also be used for powder metallurgy (PM) inspection.

Audon Electronics introduces D-Series data loggers (June 2009)

The D-Series, available from Audon Electronics, is a range of portable, battery-operated standalone temperature, humidity and thermocouple data loggers.

DAQ and control unit has 14 analogue inputs (June 2009)

The Labjack U6 USB data acquisition (DAQ) and control unit from Audon Electronics is the newest member of the company's Labjack range.

Board allows RIO units to interface with RTDs (June 2009)

Galil Motion Control has launched the SCB-48x06 signal-conditioning board, which allows the RIO pocket PLC to interface with thermocouples and RTDs (resistive temperature device).

Thermocouple module for data acquisition (June 2009)

National Instruments (NI) has launched the NI 9213 module, which adds high-density thermocouple measurements to the NI C-Series platform.

Handheld infrared thermometer launched (June 2009)

Calibration Dynamics has developed the CTR1000 handheld infrared thermometer for non-contact temperature measurement between ranges of -60C up to 1,000C.

Analogue input module added to USB-2404 DAQs (May 2009)

Adept Scientific has announced the release of Measurement Computing's universal analogue input module to the USB-2404 series of simultaneous data acquisition devices.

Inmoco expands Servotecnica slip-ring range (April 2009)

Inmoco has introduced two robust Servotecnica commercial slip rings that offer the flexibility for up to 96 connections (216 upon demand).

Back to topBack to top

Further reading
Newsletter sign up

Request your free weekly copy of the Engineeringtalk email newsletter ...

Sign up now Sign up now

Click Here

Browse by category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication