Latest news on Engineeringtalk categorised by product type
Stepper and Servo Drives, Motors, Controls
Archive page 14 of 47
Our RSS feed for Stepper and Servo Drives, Motors, Controls press releases
Jitter-free motors for surveillance
Stepper motor for surveillance and security applications is based on a Nema 14 frame size, combining neodymium magnets with a magnetic design to provide 78mNm holding torque (bipolar).
News from Omnimotor ( 6 February 2006)
Paper maker uses servo for accuracy
User application article Bespoke servomotor provides power, speed and pinpoint accuracy for the manufacture of a high-tech product for the paper making industry.
News from Motor Technology ( 6 February 2006)
Peak torque extension from servomotors
Brushless servomotors provide 53.66Nm of peak torque from the smallest package available. Brochure available
News from Inmoco ( 1 February 2006)
Micron level accuracy from stage
Linear positioning stage uses direct-drive brushless servos and linear motion guide bearings to provide micron level accuracy and repeatability with a 50kg load and a travel range up to 450mm. Brochure available
News from Aerotech ( 1 February 2006)
DC steppers customised to requirements
Industrial hybrid DC stepping motors and high performance stepper and servo motor drives designed to meet customer requirements.
News from Total Motion Systems (31 January 2006)
Servo shutter mechanism uses voice coil drive
A voice coil drive, which enables much faster open/close speeds to be achieved, is the heart of a new servo shutter mechanism developed by Geeplus Europe. Brochure available
News from Geeplus (30 January 2006)
DSP increases robot ability to collect DNA samples
User application article Combined controller and DSP provides power behind robot helping genomics researchers collect DNA information.
News from Micromech (27 January 2006)
Bipolar winding on stepper suits low noise use
High-power 1.8deg stepper motor is based on Nema 17 frame size motor and combines neodymium magnets with a magnetic design to provide 254mNm holding torque.
News from Omnimotor (26 January 2006)
Motors promise high torque in compact packages
New NEMA 23 frame motors are available in a variety of stack lengths and come complete with integral Hall effect sensors for commutation.
News from Servotechnic (24 January 2006)
Software aids motor setup
Software platform helps set up drives and motors and motion programming thanks to built-in motion controller.
News from Technosoft (23 January 2006)
Adapters help motors fit a tight spot
For applications where a NEMA 17 or NEMA 23 motor needs to fit into a tight spot, QuickSilver Controls now offers adapters for its 15-pin D-shell motor connector (D15HD).
News from QuickSilver Controls (20 January 2006)
Modular DC brush drive is easy to apply
The fully enclosed, compact modular Ion DC brush drive is the second in PMD's new family of high performance drives.
News from Performance Motion Devices ( 9 January 2006)
Integrated drive is solo performer
The Soloist MP is a low-cost full-featured intelligent drive with 10 to 80V DC bus voltage and a 10A peak current capability. Brochure available
News from Aerotech (29 December 2005)
Flexible servos suit demanding motion tasks
High-performance brushless servomotors are ideal for individual use for demanding motion control applications. Brochure available
News from Aerotech (29 December 2005)
Motor repair centre adds electronics expertise
Wyko Industrial Services aims to meet the demand for repairing drives and servomotor assemblies with its new electronics repair centre at Tyseley in Birmingham. Brochure available
News from Wyko Industrial Services (26 December 2005)
Servomotors gain economical absolute option
Parker SSD Parvex has developed an economical absolute encoder for its servomotors.
News from SSD Parvex (26 December 2005)
Servomotors are made for demanding applications
Three new ranges of DC brush servomotors provide the high levels of response and torque, accuracy and reliability required in demanding applications. Brochure available
News from Inmoco (23 December 2005)
Controller for single and multi-axis motion
Parker Hannifin introduces standalone controller that can be used for single and multi-axis motion control. Brochure available
News from Parker Hannifin Electromechanical Automation, Eur (21 December 2005)
Aerotech adds demo room to training facilities
Aerotech adds 50m2 demonstration room to its training facilities in Aldermaston, aimed at helping customers solve application problems and reduce system commissioning time. Brochure available
News from Aerotech (20 December 2005)
Online CAD drawings simplify servo integration
2D and 3D drawings of the popular MAC 800 integrated servomotors are now available for download from the JVL website.
News from JVL Industri Elektronik (15 December 2005)
Earlier news from this category...
Latest news from this category...
