Latest news on Engineeringtalk categorised by product type
Stepper and Servo Drives, Motors, Controls
Archive page 6 of 47
Our RSS feed for Stepper and Servo Drives, Motors, Controls press releases
Servo controller handles rotary knife applications
User application article QuickSilver Controls' SilverDust servo controller/driver is now capable of handling rotary knife applications, found in packaging lines.
News from QuickSilver Controls (15 May 2007)
Actuator handles heavy loads quickly
Parker Electromechanical's HPLA linear actuator has a thrust force of 5500N and will carry loads of up to 1.6 tonnes at speeds up to 5m/s. Brochure available
News from Parker Hannifin Electromechanical Automation (14 May 2007)
Unipolar stepper motor offers 8kg of thrust
User application article A new unipolar stepper motor from Astrosyn can produce over 8kg of thrust over a linear movement of 7mm.
News from Astrosyn International Technology ( 9 May 2007)
Motor features integrated electronics
Motion Control Products' BM57 motor motor presents the user with a 55 to 440mNm continuous torque capability in five package sizes.
News from Motion Control Products ( 9 May 2007)
Rack and pinion technology makes a comeback
Micromech's Alpha gearhead solution combines a rack and pinion with its planetary, allowing feed rates of 60m/min with acceleration rates of 5m/s/s.
News from Micromech ( 3 May 2007)
Amplifier power up piezo actuators
The E-481 is billed as one of the most powerful and energy efficient power amplifiers currently available for piezoelectric motion and positioning control. Brochure available
News from PI (Physik Instrumente) (25 April 2007)
Servo control modules squeezed into compact units
Technosoft's ISCM4805 / ISCM8005 Intelligent Servo Control Modules are particularly adapted for distributed and co-ordinated control of brushless, DC, linear or step motors up to 240W, 80V.
News from Technosoft (19 April 2007)
Company chooses the right motor for the task
Servo Sizing Solutions offers both design consultancy and training to engineers.
News from Servo Sizing Solutions (18 April 2007)
Motion controller suits single-axis applications
ORMEC's new single-axis ServoWire Motion and Logic Controller (SMLC-SA) integrates high-performance drive technology with open IEC61131-3 programming capabilities Brochure available
News from Inmoco (17 April 2007)
DC motor performs in demanding applications
Higher power DC motor is optimised to provide a high starting torque, as well as meeting demanding levels of ruggedness in terms of shock and EMC standards.
News from Astrosyn International Technology (16 April 2007)
Synchrotron ring starts research use
Supplying the motion control for the Diamond Light Source synchrotron ring project has been a challenge for Delta Tau, which reports it has now installed over 600 axes of motion at the project.
News from Delta Tau UK ( 3 April 2007)
Webcasts explain motion control concepts
New webcasts cover inertia matching for high load systems and an application for high-speed laser welding of fuel cells. Brochure available
News from Aerotech ( 3 April 2007)
Actuators accommodate high vertical forces
Micromech's HZR actuators have a light, compact and self-supporting construction made from a closed and therefore torsion-resistant aluminium profile.
News from Micromech (30 March 2007)
Drives combine linear and PWM amplifier technology
Aerotech's new Ensemble CP/MP/CL intelligent drives seamlessly combine linear and PWM amplifier technology for brushed and brushless servos. Brochure available
News from Aerotech (22 March 2007)
Self-clinching bearings aid imaging business
User application article Spyraflo bearings self-clinch directly into sheet metal therefore removing the need for expensive precision-machined blocks.
News from Micromech (14 March 2007)
Motors have novel coil winding geometry
Brushless DC servomotors incorporate patented coil winding geometry in a slotless motor design to deliver more power using less energy.
News from Ametek Technical and Industrial Products (14 March 2007)
Servo motor suits mechanical handling
This first generation of 1FT7 servo motors are self-cooled motors with shaft heights ranging from 48 to 100mm and a rated speed of 1500 to 6000 revs/min.
News from Micromech (12 March 2007)
Brochure highlights motion options
Aerotech's 28-page brochure features motion simulation and positioning systems for manufacturing, development and test from single-axis general purpose linear and rotary positioners, Brochure available
News from Aerotech ( 5 March 2007)
Stepper control card helps build complex systems
Cost-effective four-axis stepper motor control card offers precise synchronisation across all axes to ensure simultaneous starts and stops for accurate motion of complex systems. Brochure available
News from Adlink Technology (27 February 2007)
Website has more on automation and control
New site will be continually updated to provide an important resource for automation and control system professionals throughout Europe.
News from LG Motion (19 February 2007)
Earlier news from this category...
Latest news from this category...
