Stepper and Servo Drives, Motors, Controls

Archive page 7 of 49

Our RSS feed for Stepper and Servo Drives, Motors, Controls press releases

Servomotors suit varied applications

VL is now introducing the facility to connect integrated MAC motors to a company's existing Ethernet using a newly developed WLAN-module.

News from JVL Industri Elektronik (18 July 2007)

Motor drive offers speed and smoothness

The Danaher Motion P7000 stepping motor drive is suitable for single or multi-axis applications that demand high-speed performance or low-speed smoothness.

News from Micromech (16 July 2007)

Stepper drives handle a wide current range

The RTA stepper drive range covers motor phase currents from 0.6A/phase up to 14A/phase with motor bus voltages from 24 to 240V DC

News from Total Motion Systems (16 July 2007)

Linear bearings offer high load ratings

Micromech's RSDE linear bearings offer higher load ratings and stiffness without changing the envelope dimensions.

News from Micromech ( 5 July 2007)

Soft starters incorporate a bypass contactor

Carlo Gavazzi's RSHR-MIDI soft starters offer vibration-free starting with a dramatic reduction in mains dips and lamp flicker.

News from Carlo Gavazzi (28 June 2007)

Plug-in drive cuts assembly times

System integrators can now easily design a clean PCB that houses all the components, and get rid of all the cables.

News from Technosoft (27 June 2007)

Motion controller

Micromech the S700 motion controller has a position controller with memory for 180 motion tasks.

News from Micromech (25 June 2007)

Servomotors offer compact design

AST brushed DC servomotors offer acceleration performance over 10x that of conventional iron-cored DC motors.

News from Heason Technologies Group (20 June 2007)

Nanotranslation stages improve positioning

Improved crossed-roller bearings and 40MHz encoder processing give Aerotech's new ANT-LX nanotranslation stages twice the resolution and speed capability of their predecessor. Brochure available

News from Aerotech (19 June 2007)

Stepper motors offer high output torque

The H3 stepper motor features larger diameter, sealed ball race bearings with an improved bearing retainer and O-ring design to provide higher axial and radial shaft loading

News from McLennan Servo Supplies (19 June 2007)

Servos handle extreme environments

Inmoco's Elmo Motion Control ExtrIQ servo product family is tested against intense vibration of over 15G and offer extensive resistance to mechanical shocks.

News from Inmoco (11 June 2007)

Stepper motors suit industrial machinery

Astrosyn International Technology's P305 is an innovative, compact unit that provides both power and driver functions from a simple AC supply.

News from Astrosyn International Technology ( 5 June 2007)

Addon expands servo controller I/O

Breakout provides access to power, communications and I/O lines on SilverDust servomotor controllers.

News from QuickSilver Controls (29 May 2007)

Stepper motors incorporate internal drivers

The Sanmotion F series of stepper motors with internal drivers offers reduced and simplified wiring together with easy, compact installation.

News from EAO (28 May 2007)

Servomotor controller allows I/O sharing

QuickSilver Controls' SilverDust IGC makes it easy and inexpensive to create a scalable, multi-axis network.

News from QuickSilver Controls (28 May 2007)

Positioning stages offer long lifetimes

The ATS115 is Aerotech's smallest side-sealed, hard cover positioning stage and is based upon a tried and tested protection system. Brochure available

News from Aerotech (25 May 2007)

Servomotors improve energy efficiency

Direct drive motors are fitted directly to the load, dispensing with the need for additional components such as gearboxes, couplings, belts, chains and sprockets.