Latest news on Engineeringtalk categorised by product type
Hydraulic Components
Our RSS feed for Hydraulic Components press releases
Piston pump handles aggressive fluids
EPDM seals provide compatibility with Skydrol to type V, LD4, 500B4 and Hyjet, the standard hydraulic fluids used in aviation manufacture. Brochure available
News from Moog Controls (14 May 2008)
Stainless-steel shield protects hoses
Unicoil slides over the outside of the hose: its flexible spine can then be bent up to 90 degrees to form the hose into a desired shape.
News from Precision Brand Products (13 May 2008)
Couplings resist pressure and corrosion
Kurt Hydraulics couplings feature a precision machined internal ferrule that crimps and tightly locks into any type of spiral hose for a secure, leak-proof fit.
News from Kurt Hydraulics ( 2 May 2008)
Servo drives provide fine control in tough jobs
User application article If the two hydraulic rams were allowed to operate without a control system to keep them in balance, the whole system could easily tip over. Brochure available
News from Moog Controls (28 April 2008)
Couplings pass 200-hour salt spray test
HQ series couplings are finished with a new 'high- impact' hardening process, which gives them a silver grey colour.
News from Holmbury (21 April 2008)
Pumps handle harsh environments
The optimised drive of the A10VSO 32 series permits higher rotational speeds and up to 3% greater efficiency than previous models.
News from Bosch Rexroth - Hydraulics (14 April 2008)
Hydraulic lifters help maintain hydro safety
User application article Hydraulic system is specified for use during the installation of eight 300t-plus fuse gates in a new auxiliary spillway to protect the Jindabyne Dam in the high country of Australia.
News from Enerpac (25 March 2008)
Hydraulic pump offers 1200 configurations
T7EEC pumps incorporate a single-piece shaft, enabling them to transmit cumulative torque internally, without any restrictions, for maximum operational efficiency. Brochure available
News from Parker Hannifin (11 March 2008)
Hydraulic pumps provide precise control
Xvari 700bar pumps enables users to continuously and precisely control the amount of hydraulic oil flow in advance and retract mode.
News from Shaw Hydraulics ( 5 March 2008)
Small pump rivals larger models
The PGH series 3X from Rexroth operates at a nominal pressure of 315bar, or 350bar in intermittent operation.
News from Bosch Rexroth - Hydraulics (25 February 2008)
Hydraulics success leads to expansion
Exclusive distribution deal with Comer Industries only began in September last year but already demand has created a need for additional workshop space.
News from Group HES (19 February 2008)
Easier integration for hydraulic cylinders
Hydraulic tie rod cylinders are designed to minimise machine assembly and maintenance times, resulting in considerably increased productivity levels. Brochure available
News from Parker Hannifin (18 February 2008)
Poppet valve blocks flow in either direction
Simple poppet design of the S716 and its sharp edged seat, coupled with closely controlled roundness and surface finish, ensure consistency of quality, giving minimal internal leakage
News from Integrated Hydraulics (13 February 2008)
Lifting system helps assemble navy vessels
User application article Enerpac's PLC-controlled synchronous lifting system is used to large sections of the Daring Class Type 45 anti-air warfare destroyer.
News from Enerpac (11 February 2008)
Tubes for hydraulic and instrumentation systems
All tubes are supplied complete with the original mill certificates guaranteeing and providing complete traceability of the finished product.
News from Sandvik Materials Technology UK ( 6 February 2008)
Sensors suit mobile applications
IQAN sensors are mounted in tough stainless steel or plastic housings, complete with all signal conditioning electronics and are protected against shock, vibration and electro-magnetic interference. Brochure available
News from Parker Hannifin ( 4 February 2008)
Chain of evidence leads to oil system clean up
User application article To date, well over 500 Vapor Guards have been sold worldwide.
News from JLM Systems (31 January 2008)
Hydraulic jacks lift a heavy payload
User application article Tangye manufactures a range of unique aluminium hydraulic jacks, and with the support of Allspeeds has the capabilities to manufacture tailor made solutions to customer needs.
News from Allspeeds (31 January 2008)
System reduces the dangers of drilling at sea
As the platform moves up and down with the heave of the sea surface, hydraulic oil passes backwards and forwards from actuator to accumulator, keeping the platform stationary relative to the seabed. Brochure available
News from Moog Controls (29 January 2008)
Hydraulic platforms handle huge aircraft
User application article Electroimpact awarded Bosch Rexroth a contract for the complete hydraulic systems to operate the total of 16 hydraulic platforms needed for two wing jigs.
News from Bosch Rexroth - Hydraulics (28 January 2008)
Hydraulics company signs aircraft contract
Parker will provide the entire fuel system equipment package for the new A350 extra-widebody (XWB) aircraft. Brochure available
News from Parker Hannifin (24 January 2008)
Hydraulic valve allows easy customisation
Even with advanced electronics on board, the Moog digital interface valve is designed to withstand the temperature and vibration requirements of demanding applications, Brochure available
News from Moog Controls (17 January 2008)
Motion control company chooses best distributor
Hedley Hydraulics was made Parker Hannifin's UK and European Distributor of the Year for 2006 based on its growth and expansion over the year. Brochure available
News from Parker Hannifin (17 January 2008)
Hose service gets a makeover
Fully trained technicians aim to arrive on site within one hour, in one of a fleet of Hose Doctor vans fully equipped with an extensive range of Parker fluid connector parts and hoses. Brochure available
News from Parker Hannifin ( 8 January 2008)
Distributor provides comprehensive coverage
As a Parker distributor, BSP Hydraulics can now provide its customers with a full hydraulics package from a single source. Brochure available
News from Parker Hannifin ( 8 January 2008)
Clamping sleeves can be adapted to any space
The Kostyrka clamping sleeve offers a made-to-order fit for every application and lasting reliability and repeatability so it can simply be installed and then forgotten. Brochure available
News from Roemheld UK ( 3 January 2008)
Hydraulic components to aid dam maintenance
Richard Alan Group has secured a major order for machining precision parts for hydraulic rams to be used for a maintenance project on the Guri Dam in Venezuela.
News from Richard Alan Group (11 December 2007)
Hydraulic cylinders are cushioned for control
Rexroth's CDM1 cylinder series covers a wide performance spectrum at a standard nominal pressure of 160bar.
News from Bosch Rexroth - Hydraulics (10 December 2007)
Motorsport technology comes to servovalves
Servovalves using DDV technology are inherently more energy efficient than a conventional two-stage servovalve as they have no pilot stage hydraulic flow. Brochure available
News from Moog Controls ( 6 December 2007)
Breathers do a double act for protection
Reservoir breathers use two adsorbents to protect system fluids from the deteriorating effects of high humidity and water vapour condensation. Brochure available
News from Brownell (27 November 2007)
Fluidic muscles make robot mimic manta ray
User application article Fish uses an innovative water-hydraulic drive unit coupled with Festo fluidic muscles to produce smoothly flowing muscular movements. Brochure available
News from Festo (21 November 2007)
Low-cost hoses avoid leaks
The relevant fitting is simply positioned on the end of the hose and the pair can then be inserted into the unit and crimped, producing a leak-free connection. Brochure available
News from Parker Hannifin ( 5 November 2007)
Crimping machine saves on hose costs
User application article Wyko arranged to supply Caterpillar with a crimping machine, along with a carefully structured stock of hose and couplings. Brochure available
News from Wyko, an Eriks Company (29 October 2007)
Valve handles demanding jobs
The combination of permanent magnets and electromagnetic coils results in spool driving forces considerably larger than those that can be obtained by solenoid coils alone. Brochure available
News from Moog Controls (17 October 2007)
Equipment allows marine simulations
User application article Moog equipment was chosen to upgrade Martinek's ocean basin laboratory. Brochure available
News from Moog Controls ( 4 October 2007)
Earlier news from this category:
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
