Latest news on Engineeringtalk categorised by product type
Lubricants
Archive page 12 of 18
Our RSS feed for Lubricants press releases
Irish distribution for production fluids
AquaChem has been signed to represent the interests of Master Chemical's TRIM products in Ireland.
News from Master Chemical Europe (26 May 2004)
Synthetic grease for washing machine transmissions
Nye Lubricants supplies greases for plastic gearing, cut and powered metal gears, cut metal and plastic gearing, plastic gearing and light-duty clutch mechanisms.
News from Newgate Simms (20 May 2004)
Synthetic grease runs up to 300C
Kluberalfa HPX 93-1202 is a white high-temperature and long-term grease which is neutral in odour. Brochure available
News from Kluber Lubrication GB (19 May 2004)
Silicone-free lubricant is paint friendly
Klubersynth BH 72-422 is a fully synthetic paint-friendly, long-term and high-temperature grease with a service temperature range from -20 to +220C. Brochure available
News from Kluber Lubrication GB (19 May 2004)
Synthetic oil cuts cost of compressor operation
Technical background article With international standards such as ISO8573 placing increasing demands on the purity of compressed air, compressor operators need to improve the quality of the compressed air they generate. Brochure available
News from Kluber Lubrication GB (18 May 2004)
Oxygen sliding agent comes with NSF-H1 approval
Kluberalfa YV 93-302 is billed as the world's first high-pressure sliding agent for oxygen installations which also meets the requirements for lubricants that may come into contact with food products. Brochure available
News from Kluber Lubrication GB (18 May 2004)
Dry lubricant handles extreme conditions
Kluber has developed a special bearing compound for radial bearings which is very load-resistant and allows lifetime lubrication even with low speeds and very high temperatures. Brochure available
News from Kluber Lubrication GB (18 May 2004)
Paint no problem for high-temperature chain oil
Klubersynth CH 6-110 is a new high-temperature oil based on thermally stable polyalkylene glycol oils for the lubrication of conveyor and lifting chains. Brochure available
News from Kluber Lubrication GB (18 May 2004)
Conductive grease shields bearings from arcs
With the introduction of Nyogel 758G, Nye Lubricants has taken a simple but novel approach to designing an electrically conductive bearing grease.
News from Newgate Simms (11 May 2004)
Lubricating paste won't wash away
Kluberpaste 46 MR 401 is a white high-performance lubricating paste especially suitable for long-term and lifetime lubrication. Brochure available
News from Kluber Lubrication GB ( 6 May 2004)
Food-grade oils handle demanding hydraulics
Kluberfood 4NH1 oils are NSF H1 certified HLP oils available in typical viscosities for hydraulic systems. Brochure available
News from Kluber Lubrication GB (23 April 2004)
Food-grade coating smooths O-ring insertion
Klubertop TP 38-901 is a water-miscible thermosetting coating providing a dry, low friction surface with high elasticity (up to 150%) on elastomers or metals. Brochure available
News from Kluber Lubrication GB (23 April 2004)
Valve lubricant suits oxygen-rich applications
Kluberalfa YV 93-302 is the latest in high-performance nonflammable high-pressure sliding agents for use in oxygen/medical/food processing equipment. Brochure available
News from Kluber Lubrication GB (22 April 2004)
Synthetic grease smooths electrical connections
Uniflor 8917 is the next-generation high-temperature synthetic grease for separable electrical connectors.
News from Newgate Simms (20 April 2004)
New global identity for lubricant range
Dow Corning is introducing a new identity for its Molykote brand of automotive, food and beverage and industrial lubricant products and services.
News from Dow Corning ( 6 April 2004)
Brochure covers specialist engineering lubricants
A high quality full colour brochure, with accompanying interactive CD, is now available from DA Stuart.
News from DA Stuart (24 March 2004)
New fluid is easy to mix for pressure testing
Klubertop K 01-601 has been specifically developed as a water-miscible fluid suitable as an effective pressure testing fluid for pumps, valves, fire extinguishers and other pressure vessels. Brochure available
News from Kluber Lubrication GB (11 March 2004)
Dry lubrication prolongs chain life
Kluberplus SK 11-299 is a nonsoiling, nontacky lubricant providing excellent adhesion to chain parts, corrosion protection, water resistance and effective wear protection. Brochure available
News from Kluber Lubrication GB (25 February 2004)
Corrosion protection lubricant meets food specs
Due to high demand, Kluber Lubrication has now developed a food grade corrosion protection lubricant in spray form, Kluberfood NH1 K32. Brochure available
News from Kluber Lubrication GB (25 February 2004)
Lubricant dispenser cuts out contamination
The Klubermatic FG lubricant dispenser can hygienically and accurately dispense lubricating grease to machinery in the food and pharmaceutical industries with no risk of contamination. Brochure available
News from Kluber Lubrication GB (24 February 2004)
Earlier news from this category...
Latest news from this category...
