Latest news on Engineeringtalk categorised by product type
Seals
Our RSS feed for Seals press releases
Custom seals provided in a hurry
User application article Within nine days of being asked to quote for the project, PWI had submitted a detailed offer, including full engineering drawings. Brochure available
News from Eriks UK (12 May 2008)
Sealing materials provide extended lifetimes
Ecopur is ideal for use in seals that are in contact with mineral oil, water up to 40C and biodegradable hydraulic oils, such as vegetable oils and synthetic esters up to 60C. Brochure available
News from SKF UK ( 9 May 2008)
Noncontacting seals reduce environmental impact
The brochure explains how spiral grooves machined into the mating ring faces of the Type 2800X seal compress a pressurised inert gas that is injected between them.
News from Crane ( 9 May 2008)
Expansion for Austrian seals specialist
Major investment in its production and service resources will allow Economos to bring new cutting edge sealing technologies to market faster. Brochure available
News from SKF UK ( 5 May 2008)
O-ring calculator works in inches
The O-ring calculator is available free-of-charge for online use, via the Trelleborg Sealing Solutions' website.
News from Trelleborg Sealing Solutions UK ( 1 May 2008)
Acquisition expands medical sealing options
Simrit will soon be offering its European customers a broad range of liquid silicone and solid silicone components for medical applications.
News from Freudenberg Simrit LP (21 April 2008)
Flue duct expansion joint is custom engineered
Expansion joint can withstand wide temperature excursions and exposure to corrosive gases, making it ideal for low-pressure lightweight piping and ductwork.
News from Garlock (Great Britain) (21 April 2008)
Huge seal designed for propellers
User application article Simrit recently manufactured a 1475 x 1539 x 25mm Simmerring, which will be used to seal the main shaft in Voith Schneider propellers.
News from Freudenberg Simrit LP (18 April 2008)
Seal handles higher pressures
The tolerances of the CoverSeal are carefully and accurately adapted to suit larger installation spaces.
News from Freudenberg Simrit LP (17 April 2008)
Sealing system prevents lubricant leaks
Simrit has developed a sealing system especially for toggle systems, which is integrated into the bearing shells and reliably seals the joints.
News from Freudenberg Simrit LP (17 April 2008)
Composite seals are approved for drinking water
Approval for coated O-ring rules out the possibility of drinking water contamination caused by cleavage products that may occur during the coating process.
News from Freudenberg Simrit LP (17 April 2008)
Sealing reference split into specialised guides
For decades, the Simrit standard catalogue in printed form has been a trusted companion of developers, engineers and buyers around the globe.
News from Freudenberg Simrit LP (16 April 2008)
Filtration systems business set for acquisition
Indufil has bases in Duiven and Ede and much of its output is used in the petrochemical and power generation sectors.
News from Crane (20 March 2008)
Seal maintenance prevents unwanted emissions
Garlock Sealing Technologies has introduced a new service designed to help petro-chemical and industrial process plants meet increasing demands to prevent fugitive emissions.
News from Garlock (Great Britain) (12 March 2008)
New facilities boost seal production
Trelleborg Sealing Solutions' new facility houses a newly equipped materials test laboratory and the UK research and development centre.
News from Trelleborg Sealing Solutions UK ( 5 March 2008)
Pulp and paper brochure helps boost efficiency
John Crane's new brochure provides details of Flexibox, Metastream, Sealol and Safematic brands.
News from Crane (26 February 2008)
Economos takes on the SKF brand
Move is part of a long term strategy to integrate the existing Economos manufacturing and customer support network around the world into SKF's global operation. Brochure available
News from SKF UK (25 February 2008)
Packing passes emissions tests with ease
Supagraf Premier compression packing has beaten TA-Luft VDI 2440 emission control requirements by a significant margin. Brochure available
News from James Walker and Co (21 February 2008)
Seal survives in paper mill for six years
User application article Seal was fitted to a pressure screen that is one of largest of its kind in the world, and when removed the seal faces were in good shape with only minimal signs of wear.
News from Crane (13 February 2008)
Valve stem packing stops fugitive emissions
Measured leakage confirmed the packing meets the requirements of the most stringent US state air quality laws and consent decrees.
News from Garlock Sealing Technologies (US) (21 January 2008)
Guide details seals for the marine industry
Section subjects include gaskets and jointings, packings and tank lid seals, expansion joints and bellow, rotary and hydraulic seals and pipe supports. Brochure available
News from James Walker and Co (13 December 2007)
Seals maintain integrity of face masks
User application article Project involved producing seven new sealing products, made from coloured liquid silicone and thermoplastic rubber. Brochure available
News from James Walker Keaflex (11 December 2007)
Seal system balances pressures
The Turcon Stepseal V design has a stabilising edge which prevents seal deformation and increases assembly robustness by protecting the seal face during rod insertion.
News from Trelleborg Sealing Solutions UK (16 November 2007)
Flange protectors extend pipe lifetimes
Unprotected gaps around the outside diameters of flange joints allow moisture and debris to degrade a ring joint or gasket edge and reduce sealing efficiency. Brochure available
News from James Walker Moorflex ( 6 November 2007)
Expansion joints handle extreme environment
User application article JWT replaced two of the existing metallic expansion joints with fabric joints produced to survive the extreme gas and cyclic conditions. Brochure available
News from James Walker Townson (29 October 2007)
Guide outlines seal offerings
James Walker Sealing Products and Services guide gives details of the activities, materials, products and industrial services provided. Brochure available
News from James Walker and Co ( 5 October 2007)
Alliance consolidates sealing expertise
New division is the combination of Wyko's established seals business in the UK with the might of Eriks as a world leader in the seals market. Brochure available
News from Wyko, an Eriks Company ( 1 October 2007)
Seal upgrades meet ATEX requirements
Meco has adapted two of its seal designs to comply with ATEX, which considers packing glands unsuitable for service in potentially explosive atmospheres Brochure available
News from Meco Shaft Seals ( 1 October 2007)
Deformable seal cuts downtime
Garlock Sealing Technologies' Helicoflex range of Omicron seals handles temperatures of -269C to 750C and sealing levels of up to 1000bar for liquids.
News from Garlock (Great Britain) (27 September 2007)
Sealing system replaces mechanical seals
The Hydra-Justt sealing system avoids the risk of catastrophic failure in hostile, abrasive environments.
News from Garlock Sealing Technologies (US) (14 September 2007)
Company expands chimney sealing offering
James Walker Townson's Comflex chimney expansion joints of fluoroelastomer and fluoroplastics work in wet conditions. Brochure available
News from James Walker Townson ( 4 September 2007)
Website offers seal compatibility checks
DP Seals' chemical compatibility database provides a first line of enquiry when investigating which rubber polymer to choose.
News from DP Seals (30 August 2007)
Sensors automate O-ring application
In many modern applications, O-ring seals are installed automatically on automated assembly lines.
News from Freudenberg Simrit LP (17 August 2007)
Compound provides chemical resistance
Trelleborg Sealing Solutions has released the newly developed Isolast Fab Range J9675.
News from Trelleborg Sealing Solutions UK (13 August 2007)
Sealing company increases UK investment
Flexitallic has announced a further GBP 600,000 capital investment programme for its UK headquarters and manufacturing facility based in Cleckheaton.
News from Flexitallic ( 6 August 2007)
Seals cope with harsh environments
Unlike flat gaskets, HTMS resilient metal seals have a defined spring back in a wide temperature range.
News from HTMS (26 July 2007)
Earlier news from this category:
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
