Visit the Schunk Intec web site

News releases on Engineeringtalk categorised by date

Sunday 20 August
to Saturday 26 August 2000

DC/DC converter meets VRM9.0 specification

Artesyn Technologies has launched a new series of 110W, non-isolated DC-DC converters specifically designed to meet the demanding requirements of next-generation microprocessors.

News from Emerson Network Power - Embedded Power (25 August 2000)

Artesyn acquires Azcore Technologies

Artesyn Technologies has announced that it has acquired Azcore Technologies, which offers high-efficiency DC-DC converters with a special emphasis on surface mountable board level products

News from Emerson Network Power - Embedded Power (25 August 2000)

Cost Engineering short course a success

The first of a series of Short Courses on Cost Engineering was recently offered by Cranfield University and attended by Cost Engineers and Estimators from Ford, the MoD and Rolls-Royce

News from Cranfield University (25 August 2000)

Version 5.1 of INtools released

The Process and Building Solutions division of Intergraph Corporation today announced the 5.1 version of INtools instrumentation engineering software.

News from Intergraph Process, Power and Offshore (25 August 2000)

3.1 version of SmartPlant Explorer released

The Process and Building Solutions division of Intergraph Corporation today announced the 3.1 version of the integrated, Web browser-based SmartPlant Explorer software

News from Intergraph Process, Power and Offshore (25 August 2000)

Brush to brushless adapter solves motor problem

 User Application Article  A Bayside adapter module let Kendro Laboratory Products replace a brush motor with a brushless motor, yet control it with an existing SCR full-wave bridge controller

News from Parker Bayside (24 August 2000)

Electrical product range now all on line

Camden Electronics has announced that its entire catalogue of products is now available on-line at the company's web site, with full technical specifications and drawings now included

News from Camden Electronics (24 August 2000)

The Red Book - a new 72-page product guide out

Cutler-Hammer has published the latest edition of its Red Book, which covers the latest developments in Cutler-Hammer's world-leading range of industrial controls and circuit protection equipment

News from Cutler-Hammer (24 August 2000)

Enclosures ideal for wall-mounting instrumentation

 User Application Article  Fibox came up with the ideal range of housings required by Synectic Design, designers and manufacturers of industrial control instrumentation and systems

News from Fibox (24 August 2000)

Go-kart remote control in polycarbonate enclosures

 User Application Article  Coni Electronics chose MNX housings, made by enclosure specialist Fibox, to house go-kart remote controls, for use all over the world.

News from Fibox (24 August 2000)

Prerotation pumping system for Abu Dhabi

 User Application Article  The Abu Dhabi Sewerage Projects Committee chose Hidrostal's prerotation pumping system, as it offered several advantages over conventional centrifugal pumping installations.

News from Hidrostal (24 August 2000)

Affordable Laminated Object Modelling - by hand!

In the JP5 process you simply import an STL file into the JP5 software, which slices up your model. You then cut the slices from standard label paper using a standard vinyl sign cutter. It works!

News from Leonardo Computer Systems (24 August 2000)

Meiden drive in fascinating Science Museum exhibit

 User Application Article  Making the Modern World, a new exhibition at the Science Museum, has a working version of the world's first continuous weft, automated textile loom, now electrically driven by a Meiden drive

News from Meiden Europe (24 August 2000)

Neat link for weight transmitters to Fieldbus

GATE3, available from Nobel Systems, is a communications translator that connects a local network of weight and force measuring indicators and transmitters to an external fieldbus network  Brochure Available 

News from Vishay Nobel (24 August 2000)

Controller setup software free from Omron

SYS-Config version 2.0, an advanced software support package for setting up temperature controllers, process controllers and intelligent signal processors is free on request from Omron.  Brochure Available 

News from Omron Electronics (24 August 2000)

LVDTs and load cells operate underwater in NZ

 User Application Article  The National Institute for Water and Atmospheric Research of New Zealand chose RDP to supply sensors for the measurement phase of a project to study seaweed  Brochure Available 

News from RDP Electronics (24 August 2000)

2000th product conformity certificate from Sira

Sira has issued its 2000th product conformity certificate, and it is one of over 50 product certificates issued to intrinsically safe mining equipment manufacturer Joy Mining.

News from Sira (24 August 2000)

SolidWorks ships 100,000th SolidWorks copy

SolidWorks Corporation today announced that it has shipped its 100,000th copy of SolidWorks software, less than 5 years after SolidWorks first introduced its flagship 3D mechanical design solution

News from SolidWorks Corporation (24 August 2000)

Analogue temperature transmitters come out on top

 User Application Article  Eight different manufacturers' in-head temperature transmitters were trialled alongside existing panel mount devices at Baxter Healthcare, and a Status Instruments analogue device came out on top  Brochure Available 

News from Status Instruments (24 August 2000)

SRS files for patents on enclosure designs

To safeguard the extensive innovative design in the new range of stylish Cubic modular enclosures, SRS Products has filed for patents on certain unique aspects of the product design.

News from SRS Products (24 August 2000)

LDA Chair to open OSPMA-FieldComms event

OSPMA-FieldComms has announced that George Barlow, chair of the new London Development Agency, will officially open the event on 5th December 2000

News from Angel Business Communications (23 August 2000)

Anilam CNCs give trainees useful experience

 User Application Article  Glasgow's Anniesland College's School of Engineering has upgraded CNC milling and turning facilities through the retrofit of Anilam 1100M and Anilam 1200T CNC systems

News from ACI (UK) (23 August 2000)

Incremental linear encoder for CNC press brakes

With its new LS 629, Heidenhain presents an incremental linear encoder that has been specially developed for use on CNC press brakes.  Brochure Available 

News from Heidenhain (GB) (23 August 2000)

Rotary encoders for hazardous locations

The Heidenhain rotary encoder programme now includes a compact range of protected units for use in hazardous locations, in housings only slightly longer than standard encoders  Brochure Available 

News from Heidenhain (GB) (23 August 2000)

£4 million orders for deep hole drilling machines

In just one month, Mollart Machine Tools of Chessington won orders, many for export, worth more than £4 million for deep hole drilling machines.

News from Mollart (23 August 2000)

Deep hole drilling for mass testing of DNA samples

Mollart Engineering's specialist deep hole drilling capability has secured a vital production contract for special perspex components to enable mass testing of DNA samples

News from Mollart (23 August 2000)

Millennium Dome model maker goes for Edgecam

As Asylum Models' existing off-line programming system began to creak under the demands of making the Body Zone's animated heart and brain for the 'Millennium Experience', it went for Edgecam

News from Pathtrace Engineering Systems (23 August 2000)

True power monitor completes relay range

In addition to the current, voltage, earth fault, phase sequence and thermistor monitoring relays, a true power monitor now completes the slimline S-range safety relay series.

News from Pilz Automation Technology (23 August 2000)

Blue silicone rubber seals meet EU demands

Recent EU law requiring that all plastic and rubber products used in food manufacturing plant must be blue in colour can be met by a range of pigmented silicone rubber seals and gaskets from SFS

News from Silicone Fabrication Services (23 August 2000)

Blue silicone rubber seals meet EU demands

Recent EU law requiring that all plastic and rubber products used in food manufacturing plant must be blue in colour can be met by a range of pigmented silicone rubber seals and gaskets from SFS

News from Silicon Sensing Systems (23 August 2000)

Vibration and temperature show machine state

The Marlin condition detector from SKF is an extremely effective way of checking the health of a machine, with vibration and temperature being measured to assess the machine's state.  Brochure Available 

News from SKF UK (23 August 2000)

Laser adds new dimension to mill-turn centre

By fitting a 50 W, Nd:YAG laser to the upper turret of a Traub TNC 30 mill-turn centre, components can now be laser profiled, small holes machined, and much more

News from StarragHeckert UK (23 August 2000)

Highest ever specification Powerturn installed

The recent installation by Ward CNC of a Toshulin Powerturn 1600 C-M 2APC vertical boring, turning and milling centre at a blue chip aerospace manufacturer heralded a number of firsts

News from Ward CNC Machinery (23 August 2000)

More investment helps keep machinery group ahead

Two new major machine tool agencies, additions to the sales and applications teams, plus a massive investment in IT are the latest evidence of T W Ward CNC Machinery's forward-thinking strategy

News from Ward CNC Machinery (23 August 2000)

Customer satisfaction survey on the way

During October WF Electrical is to conduct its second annual customer satisfaction survey, which is a clear demonstration of WF's commitment to customer satisfaction.

News from WF Electrical (23 August 2000)

Hall-effect switch IC ideal for direction sensing

The A3425 dual Hall-effect switch is an ultra-sensitive dual sensor integrated circuit that is ideally suited to fine-pitch direction-sensing applications in harsh automotive environments

News from Allegro MicroSystems Europe (22 August 2000)

Airborne EW towed decoy mini-TWTA launched

To meet the accelerating demand for Airborne EW systems worldwide, Albacom has designed and developed a Mini-Travelling Wave Tube Amplifier System optimised for towed decoy systems

News from Albacom (22 August 2000)

Masterswitch provides remote power control

The latest network-enabled ancillary product for the IMserv family of server racks is the 8-way MasterSwitch, an intelligent power management module providing complete SNMP management capability

News from APW Enclosure Solutions (22 August 2000)

New services from ARC follow continued growth

The ARC Advisory Group has experienced 60% growth in demand for its services and added executive talent to both its consulting and advisory services.

News from ARC Advisory Group (22 August 2000)

Attempt to quantify cost of poor power quality

A first attempt to assess the cost of poor power quality to European industry was made at a workshop held on 8th June 2000 by the European Copper Institute in Brussels.

News from Copper Development Association (22 August 2000)

Free guide to using copper tube in water services

Copper Development Association have just issued 'Copper tube in domestic water services' to help in the understanding of the correct use of copper in domestic water services

News from Copper Development Association (22 August 2000)

Ford Halewood links up with DeviceNet

 User Application Article  When the Ford Motor Company installed a new gearbox assembly line at its Halewood Transmission Plant on Merseyside it implemented the largest PC-controlled automotive assembly facility in Europe.

News from Open DeviceNet Vendor Association (22 August 2000)

ThermoJet office printers for Hong Kong

3D Systems Europe Limited has signed an agreement to provide at least 100 of its ThermoJet office printers to businesses throughout Hong Kong

News from 3D Systems Europe (22 August 2000)

Canon to distribute Thermojet printers in Japan

3D Systems Europe Limited today announced that Canon Sales Co will be a distributor of ThermoJet office printers in Japan.

News from 3D Systems Europe (22 August 2000)

Solid object printer for aerospace casting company

 User Application Article  A ThermoJet solid object printer from 3D Systems Europe Limited has been installed at the Honeywell Precision Casting Facility (Normalair-Garrett Limited) in Chard, Somerset.

News from 3D Systems Europe (22 August 2000)

Stereolithography system at precision part maker

 User Application Article  Europlus Fibre Optics, a manufacturer of mechanical components and assemblies for the fibre optics industry, has installed a stereolithography system, the SLA 250, from 3D Systems Europe

News from 3D Systems Europe (22 August 2000)

New resin improves stereolithography

3D Systems Europe Limited has launched a new material, Cibatool SL7540, designed to create parts that mimic end-use plastics in stereolithography (SLA) applications

News from 3D Systems Europe (22 August 2000)

Ten SLA7000 solid imaging machines for USA

3D Systems Europe Limited has signed a Volume Purchase Agreement with Align Technology, Inc, a manufacturer of orthodontic products in Sunnyvale, California, USA.

News from 3D Systems Europe (22 August 2000)

Explosion Proof loudspeakers suitable for Zone 1/2

The new BEx 15 and 25W Explosion-Proof loudspeakers have peak outputs of 113 and 117dB(A) at 1m at 2kHz respectively, making them ideal for public address use in noisy environments

News from European Safety Systems (22 August 2000)

Flow Sensor market to remain steady says report

According to new strategic research from Frost and Sullivan, World Flow Sensor Markets, the flowmeter industry generated revenues of $3.1 billion in 1999 and growth is predicted to remain steady

News from Frost and Sullivan (22 August 2000)

Wider range of PCI fieldbus cards available

Hayes Control Systems has introduced a diverse range of PCI-based Beckhoff PC Fieldbus cards for use with four Fieldbus systems: Lightbus, Profibus, CANopen and DeviceNet.

News from Hayes Control Systems (22 August 2000)

Bus couplers available for Modbus too

Hayes Control Systems Ltd has expanded its Beckhoff Bus Coupler range with the UK launch of the BK7300, which adds the Modbus protocol to the long list of fieldbuses available

News from Hayes Control Systems (22 August 2000)

Industrial PC features built-in display

Building on its experience in developing PC solutions for industrial purposes, Hayes Control Systems Ltd announces the UK launch of the new Beckhoff PC C3300 19-inch, built-in industrial PC

News from Hayes Control Systems (22 August 2000)

New industrial PC designed for wall mounting

Hayes Control Systems is launching a new compact state-of-the-art Beckhoff industrial PC, the C3620, designed for installation to control cabinet walls

News from Hayes Control Systems (22 August 2000)

EMC instrumentation rental service launched

Hampshire-based HF Instruments, suppliers of advanced instrumentation to test-houses and laboratories, is broadening the scope of its services to industry with the launch of a rental arm.

News from Accelonix (UK) (22 August 2000)

Optical and Voice alerts in buzzer range

H-Squared Electronics has an exclusive UK agency agreement with the North American Capacitor Company to market their range of Mallory Sonalert devices.

News from H-Squared Electronics (22 August 2000)

Press to Eject battery holder for 2032 coin cells

H-Squared Electronics, the UK's main supplier of batteries for industrial use, is now able to offer its customers the new Press to Eject battery holder from MPD.

News from H-Squared Electronics (22 August 2000)

Wafer-thin, lightweight and powerful batteries

Battery specialist, H-Squared Electronics is bursting to tell customers about a new power source that opens up a world of new applications and flexibility for design engineers.

News from H-Squared Electronics (22 August 2000)

Busy time for Invensys Climate Controls in Milan

Products developed and manufactured in the UK played a major role in the outstanding success achieved by Invensys Climate Controls at the recent Mostra Convegno exhibition held in Milan.

News from Invensys Climate Controls (22 August 2000)

Dynamic advances in electromagnetics simulation

The latest version of the MagNet 6 electromagnetics simulation package from Infolytica features a full motion-solving capability for translationally symmetric and axisymmetric devices.

News from Infolytica (22 August 2000)

CD-Rom introduces new Visual PLC

An ingenious and fun CD-ROM demonstrates all the features and functions of the industry first Visual PLC from Keyence using clever graphics and 3d animation.

News from Keyence (UK) (22 August 2000)

Ironcad: not re-creating dated 1980s thinking!

Are today's Solid Modellers productive tools, or have most CAD software vendors blindly copied dated 1980's modelling software which defeats many of the primary objectives of using CAD?

News from Leonardo Computer Systems (22 August 2000)

How packaging printers can change jobs on-the-fly

The technology used by Indramat to revolutionise newsprint machines, is now being widely applied to flexographic and gravure packaging print machines.

News from Bosch Rexroth - Electric Drives and Controls (22 August 2000)

Workstations aimed at Windows NT Embedded market

Compact and rugged, Nematron's New e-Series range of Industrial Workstations has been designed to meet the needs of the emerging Windows NT Embedded (NT-e) market.

News from Nematron Europe (22 August 2000)

Vibration white finger and its prevention

 Technical Background Article  Vibration white finger can affect workers using vibrating tools and equipment for even short periods of time each day. Norbar Torque Tools Ltd looks at the problem - and its prevention  Brochure Available 

News from Norbar Torque Tools (22 August 2000)

Software for 5-axis interpolative metalcutting

Making its UK debut at CIM 2000 will be a software module developed by Open Mind for full 5-axis CNC milling using its hyperMILL and hyperFORM computer-aided manufacturing (CAM) products.

News from Open Mind (Learning/HR) (22 August 2000)

Water storage heaters support train wash facility

 User Application Article  Potterton Commercial Water Storage Heaters are playing a vital role at the new train wash facility at Chester - part of Railtrack's drive to ensure smart, clean trains on busy commuter routes

News from Potterton Commercial (22 August 2000)

Potterton Commercial boilers for Tower of London

 User Application Article  Potterton Commercial boilers are spearheading a programme of boiler replacement and upgrades at the Tower of London as part of this top tourist attraction's ongoing drive to bring plant up to date

News from Potterton Commercial (22 August 2000)

Efficient screens save UK water companies money

 Technical Background Article  The onset of AMP3 means that greater screening efficiencies will be required for aesthetic pollutants such as faeces, tissue paper and sanitary products, as Robbins and Myers explains

News from Robbins and Myers (22 August 2000)

Sanitary pumps: now over 150 models

Fluid management specialist Robbins and Myers supplies sanitary pumps to the food processing, dairy, chemical, pharmaceutical and cosmetics industries.

News from Robbins and Myers (22 August 2000)

Quiet pumps for three masted barque

 User Application Article  As the tall ship, the Lord Nelson, a three masted barque, makes its way across the Atlantic Ocean and up the coast of the USA, it will be using quiet, heavy-duty waste pumps from Robbins and Myers

News from Robbins and Myers (22 August 2000)

Storm screen tests well for for municipal waste

The new RM6000 storm screen designed for municipal waste and water or industrial applications is now available from Fluid management specialists, Robbins and Myers, based in Chandlers Ford, Hampshire.

News from Robbins and Myers (22 August 2000)

Robbins and Myers pumps tops for Teesside again

 User Application Article  A further 12 Robbins and Myers R and M2000 pumps have been selected by Entec UK for phase II of Northumbrian Water's effluent treatment plant on Teesside

News from Robbins and Myers (22 August 2000)

Manufacturing Week features new seminar programme

Manufacturing Week, the UK's only annual, national manufacturing exhibition will feature a comprehensive new seminar programme, addressing key issues facing the manufacturing industry.

News from Reed Exhibitions (UK) (22 August 2000)

Manufacturing Week 2000 attracts the exhibitors

Manufacturing Week, the UK's largest annual industry event for design and production engineers and technical managers across all industry sectors, is almost sold out

News from Reed Exhibitions (UK) (22 August 2000)

Double-column sawhead guidance on bandsaws

The new Kastotwin bandsawing machine range from Kasto, Germany, is designed for high production, close tolerance cutting.

News from Kasto (22 August 2000)

Sludge treatment plant order for Aberdeen

Simon-Hartley Cambi Ltd has received an order for a thermal hydrolysis, sludge treatment plant in Aberdeen which will process an average of 16,500 tonnes of dry solids per year

News from Simon-Hartley (22 August 2000)

East of Scotland Water cuts treatment costs

 User Application Article  The installation of Simon-Hartley's DAB system at Bowhouse Wastewater Treatment Works, has meant that East of Scotland Water has cut its transport costs from two sites by 75%.

News from Simon-Hartley (22 August 2000)

Sewage treatment technology keeps the coast clear

 User Application Article  Solids, fluids and separation specialists, Simon-Hartley have supplied sludge thickening and dewatering equipment to Yorkshire Water for their Coastcare Scheme.

News from Simon-Hartley (22 August 2000)

Southern Water gets lower maintenance costs

The refurbishment at Southern Water's Sewage Treatment Works in Tunbridge Wells, has benefited from the Framework Agreement recently concluded between Simon-Hartley and Southern Water.

News from Simon-Hartley (22 August 2000)

Helpline for free advice on recalibration

To tie in with the acquisition of Theta Systems and the extension to its UKAS accredited NAMAS calibration laboratory, SI Pressure Instruments - has launched a 'metrology helpline' for customers

News from GE Sensing (22 August 2000)

Pressure calibrator used in avalanche control

 User Application Article  SI Pressure Instruments has supplied a hydraulic PC6 Calibrator Kit to the California Department of Transport to calibrate pressure transmitters used in the GAZ-EZ avalanche control system.

News from GE Sensing (22 August 2000)

Transdrive is Sprint's Distributor of the Year

Sprint Electric has named Transdrive, one of the UK's leading independent specialist distributors of Sprint Electric variable speed drives, as its 'Distributor of the Year'.

News from Sprint Electric (22 August 2000)

Specialist lubricants for linear guides released

THK has released details of a new series of four high performance lubricants, AFA, AFB, AFC and AFE, which has been designed to maintain the smooth movement of the company's LM Guides

News from THK UK (22 August 2000)

Extra-wide versions of linear guides introduced

THK UK is launching a new range of extra wide SHW guides, adding to the company's range of next generation LM Guides featuring Caged Ball technology.

News from THK UK (22 August 2000)

Linear guides ideal for restricted spaces

SRS-type LM Guides are an ideal choice for locations where space is restricted as they have a low cross-section height to the rail and benefit from a compact body with a single row of balls

News from THK UK (22 August 2000)

Linear guide aimed at wet applications

THK UK is launching a new LM Guide, the HSR M2, which features high corrosion resistance, making it the ideal choice for submerged or moisture prone applications

News from THK UK (22 August 2000)

Relay maker chooses 3M to replace CFC cleaner

 User Application Article  When Releco, a manufacturer of sophisticated industrial relays in Spain, decided to replace its CFC-based cleaning processes, it chose a new system using 3M Novec HFE Fluids

News from 3M Speciality Materials (22 August 2000)

Digital wattmeter offers sensitive current ranges

The new WT200 from Yokogawa is a high-performance digital wattmeter with very sensitive current ranges, ideally suited to the measurement of standby power levels in consumer electronics products

News from Yokogawa Europe - Test and Measurement (22 August 2000)

More compact, five-axis machining centre

A compact, five-axis machining centre suited to producing highly complex components to close tolerances has been introduced by Yuasa Warwick Machinery.

News from Yuasa Warwick Machinery (22 August 2000)

State of the art car dealer uses Abac compressors

 User Application Article  The latest low noise ABAC compressors are being used to provide a high quality supply of compressed air for powering various air tools and workshop equipment at a new Hamer Toyota dealership

News from Abac UK (21 August 2000)

Abac acquires ALUP Kompressoren

As part of a strategic investment in the European industrial market, ABAC, the world's largest manufacturer of compressed air systems, has acquired ALUP Kompressoren GmbH.

News from Abac UK (21 August 2000)

20% cost savings from variable speed compressors

Following its recent acquisition of ALUP Kompressoren GmbH, ABAC UK Ltd is launching a new range of variable speed compressors, which have been developed in conjunction with Danfoss.

News from Abac UK (21 August 2000)

VXI signal switching into the next generation

The SMIP (Switch Modularity and Interface Platform) range of VXI modular signal switching products is now available from TTi (Thurlby Thandar Instruments), the exclusive UK distributor.

News from TTi (Thurlby Thandar Instruments) (21 August 2000)

MCP-HEK to distribute ThermoJet printers

3D Systems Europe Limited has announced that MCP-HEK GmbH will become a distributor of ThermoJet printers in Europe, alongside its metal part casting process.

News from 3D Systems Europe (21 August 2000)

Rotating electrical joint offers longer life

IDM Electronics introduces the Twist Capsule Assembly, a high performance alternative to cable wrap assemblies or slip rings in limited angle applications where long life and reliability are important

News from IDM Electronics (21 August 2000)

Seed Bank monitored by cooled mirror dewpointmeter

 User Application Article  The Royal Botanic Gardens (RBG) is using a Dewmet cooled mirror dewpointmeter from Michell Instruments to monitor the ERH levels and therefore moisture status of seeds  Brochure Available 

News from Michell Instruments (21 August 2000)

Performance under pressure from dewpointmeter

Michell Instruments has launched a new S4000 precision dewpointmeter, which offers a pressure rating to 10barg, enabling operators to measure pressurised industrial air and gas streams.  Brochure Available 

News from Michell Instruments (21 August 2000)

Moisture Manager just the job for Fibrecore

 User Application Article  Michell Instruments has received one of the first orders for the new eight channel Moisture Manager from Fibrecore, the worlds longest established manufacturer of high-quality fibre-optic cables.  Brochure Available 

News from Michell Instruments (21 August 2000)

Portable, traceable humidity calibration

Michell Instruments is launching a new, portable humidity calibrator to monitor the accuracy and performance of relative humidity probes, cooled mirror and capacitance dewpoint sensors.  Brochure Available 

News from Michell Instruments (21 August 2000)

High reliability from industrial LVDTs

The latest MTN/IE series of industrial LVDT transducers from Monitran provide high levels of reliability and longevity in demanding industrial applications

News from Monitran (21 August 2000)

Accelerometers ideal for submersible plant

Monitran Ltd has introduced a range of rugged submersible accelerometers which are ideal for the monitoring of vibration in submersible plant, such as pumps, for predictive maintenance purposes.

News from Monitran (21 August 2000)

New family of intrinsically safe accelerometers

Monitran Ltd's new family of intrinsically safe accelerometers provide IP67 protection, BASEEFA and EEx ia IIC T6 certification thanks to stainless steel construction and no moving parts

News from Monitran (21 August 2000)

Accelerometers designed specifically for PLC link

Monitran has launched a new range of high performance accelerometers, designed specifically for direct connection to industry standard PLCs, using a conventional two-wire 4-20mA interface.

News from Monitran (21 August 2000)

Better predictive maintenance in water pumping

 User Application Article  Monitran has helped many water companies to ensure optimum performance and longevity of their pumping systems, through effective vibration monitoring, as Chris Hansford explains

News from Monitran (21 August 2000)

Total number of news releases published during the week: 105

News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000

 

Send us a blank email now to get our free regular email newsletter from the Editor
Engineeringtalk news by product category
Engineeringtalk news by date
Engineeringtalk news by manufacturer
Engineeringtalk Home Page


 

Register for the FREE Engineeringtalk email newsletter now! News and more every issue. Click here for details.