News releases on Engineeringtalk categorised by date
Sunday 27 July
to Saturday 2 August 2003
Software speeds weapons simulation
The US Air Force Research Laboratory has used VisSim to develop a high-fidelity 6-degree-of-freedom modelling system that simulates the flight dynamics and performance of weapons systems. Brochure Available
News from Adept Scientific ( 1 August 2003)
"Widest" claim for fan range
Aerco reckons it offers the widest range of compact AC and DC equipment fans in the UK.
News from Aerco ( 1 August 2003)
Flow switches suit wide ranging environments
The FS range of flow switches uses the flow of liquid within a pipe to move the switch's paddle and operate a reed switch contact.
News from Active Switch and Sensor ( 1 August 2003)
Neodymium iron boron magnets prove popular
Neodymium iron boron magnets are proving to be increasingly popular with engineers.
News from Active Switch and Sensor ( 1 August 2003)
Acquisition planning for software-intensive plant
Time to market for a new product is a primary success metric in a broad range of manufacturing industries, as detailed in a new report.
News from ARC Advisory Group ( 1 August 2003)
Flowmeter solves flume problems at Esholt STW
User Application Article The ChannelMag flat electromagnetic area-velocity flowmeter ensures the correct treatment of sewage for the Bradford and outlying areas.
News from Arkon Flow Systems ( 1 August 2003)
Handheld testers star in catalogue
No fewer than 50 instruments, ranging from insulation and continuity testers to LCR test sets, are featured in the new handheld product catalogue from Megger. Brochure Available
News from Megger ( 1 August 2003)
Speedy access to pipe couplings
Bete has cut lead times for its entire range of advanced Dur O Lok pipe couplings.
News from Bete ( 1 August 2003)
Brass goes nuclear - where plastics fear to tread
Brass has distinct advantages over alternative materials when designing parts that will be subject to nuclear radiation.
News from Copper Development Association ( 1 August 2003)
Low cost mounting system
To facilitate the mounting of the highly rated Sugino drilling and tapping units on machine bases, CPR Automation supplies a wide range of mounting equipment.
News from CPR Automation ( 1 August 2003)
Coolant switch saves for cold rolling specialist
User Application Article By changing to Castrol, cold rolling specialist JB and S Lees is saving GBP 30,000 a year and improving the working environment for its mill operators.
News from Castrol UK ( 1 August 2003)
Delcam retains position
A new report confirms that Delcam retained its position as the leading international supplier of specialist machining software and associated services during 2002. Brochure Available
News from Delcam ( 1 August 2003)
Simulator to star in digital manufacturing scheme
The Delmia Quest simulation tool is to be used in a test programme to incorporate digital manufacturing software in an engineering supply chain.
News from Delmia ( 1 August 2003)
Marketing deal boosts measuring arm
OGP (UK) has formed a strategic alliance involving sales, support and product development for the award-winning Polar 3D measuring arm with DEA Brown and Sharpe.
News from OGP UK ( 1 August 2003)
Wall Street Journal is top read for US engineers
According to a recent survey, engineers and construction professionals in the USA read The Wall Street Journal more than any other publication.
News from EPCglobal ( 1 August 2003)
Wappler takes charge in Houston
Robin Wappler is the new Operations Manager for the EPCglobal Houston office.
News from EPCglobal ( 1 August 2003)
Reducer line gets larger
Emerson Power Transmission has added two new sizes to its Browning Torque Taper Plus reducer line.
News from Emerson Power Transmission ( 1 August 2003)
Learning system for automation and technology
Festo Didactic, the training division of automation specialist Festo, has launched a new issue of its catalogue entitled "Learning system for automation and technology". Brochure Available
News from Festo ( 1 August 2003)
No creep for novel rolling guides
Milton Keynes based IKO Nippon Thompson reckons it is proving to be one of the world's most innovative manufacturers of both standard and special application products.
News from IKO Nippon Thompson ( 1 August 2003)
Toolkit takes on digital motion control
The Technosoft IMDM15 kit is a complete development platform based on a power module and embedded DSP controller, providing a complete tool for digital motion control solutions design. Brochure Available
News from Kane Computing ( 1 August 2003)
Scanner spotlights smaller samples
Recently exhibited at the Control Messe 2003 in Germany, the new LC15 scanner makes it possible to scan small and detailed objects on a CMM.
News from Metris ( 1 August 2003)
Sublimation system produces front panels in-house
Mega Electronics has developed a sublimation printing system which provides a cost-effective way to produce front panels, signs and labels on a variety of substrates in full colour.
News from Mega Electronics ( 1 August 2003)
Intelligent drive gets motors in motion
A new intelligent servo drive is capable of controlling both brushed and brushless motors from a single unit.
News from PML FlightLinK ( 1 August 2003)
Easy setup for loop-powered controllers
A new family of 4-20mA activated solid-state contactors accept the industry-standard 4-20mA signal and convert it into a high-speed, time-proportional output.
News from Power-io ( 1 August 2003)
Forum offers opportunity for comparison
The second Read-out Forum offers participants a unique opportunity to compare and contrast four of the leading manufacturers' offerings in certain applications in process and service industries.
News from Read-Out Publications ( 1 August 2003)
Steel cable mounts for composite assemblies
A novel stainless-steel tie-wrap mount allows easy securing of cables, pipelines and the like to adjacent composite structures.
News from Rotaloc (Europe) ( 1 August 2003)
Questionnaires test hazardous area awareness
Sira Test and Certification has compiled a series of questionnaires which offer companies the chance to test staff on their hazardous area knowledge.
News from Sira ( 1 August 2003)
Feeder weeds out incomplete assemblies
User Application Article Sortimat Protos Automation has recently produced a novel dual-function feeder.
News from Sortimat Protos Automation ( 1 August 2003)
Logging system helps cut industrial power costs
The Powerlog electricity monitoring system ensures heavy power users can keep their operational processes and monitoring procedures within the terms of Climate Change Levy Agreements.
News from TBG Solutions ( 1 August 2003)
Weisenahl heads up European operations
Two Technologies has appointed Christian Weisenahl as European Territory Manager of its new European office located in Munich, Germany.
News from Two Technologies ( 1 August 2003)
Recycling system boosts Northumbrian Water
User Application Article Northumbrian Water recently asked Verder to provide a more efficient water boost system.
News from Verderflex ( 1 August 2003)
Genie conjures up saucy cost savings
User Application Article Ice Cream manufacturer, Granelli McDermott uses a Genie pump to transfer raspberry sauce at its factory in Cheadle, Cheshire.
News from Verderflex ( 1 August 2003)
Digital drives give boost to labelling machines
Labelling machines can apply self-adhesive labels onto containers of various shapes and sizes, with high accuracy and rates of up to 120m/min, using the new fully digital drive technology.
News from Astrosyn International Technology (31 July 2003)
Controller keeps track of viscosity
User Application Article Leading viscosity control company Fullbrook Systems has chosen to use Eurotherm control and data acquisition products for maximum flexibility.
News from Eurotherm (31 July 2003)
CAD software optimised for the factory floor
A new version of PowerCAD CE offers users the ability to view, markup, create and edit 2D and 3D CAD drawings on Rockwell Automation's VersaView CE and MobileView industrial computer systems.
News from GiveMePower Corporation (31 July 2003)
Glass fibre props run to higher speeds
Glocon has developed a new family of Swifter high-performance, high-efficiency industrial glass-fibre axial props.
News from Glocon (31 July 2003)
Fixtures get to grips with test specimens
Lloyd Instruments has published a new catalogue of grips and fixtures for its materials testing systems used throughout industry.
News from Lloyd Instruments (31 July 2003)
Heavy-duty solution for pneumatic power
Hoerbiger-Origa has extended its Airfit family of industrial air preparation equipment with a massive heavy duty G2 (2in) filter/regulator/lubricator. Brochure Available
News from Hoerbiger-Origa (31 July 2003)
Drive simplifies pharmaceutical packaging machines
One of the first controls suppliers to bring the function "building blocks" of IEC61131-3 to the public domain is Elau with its PacDrive automation solution. Brochure Available
News from Inmoco (31 July 2003)
Grime heads new recruits
Kerry Ultrasonics has appointed David Grime as its new Managing Director.
News from Kerry Ultrasonics (31 July 2003)
Gauges check surface finishes in difficult spots
Mahr Federal has a new family of surface finish gauging fixtures specifically designed to measure difficult and often inaccessible automotive component surfaces right on the shop floor.
News from Mahr Federal (31 July 2003)
Quality gains new recognition
Macro Sensors has received ISO9001:2000 certification at its Pennsauken, NJ manufacturing headquarters.
News from Macro Sensors (31 July 2003)
Report details flame retardants for plastics
The latest market report from Rapra examines new developments from a range of flame retardant producers.
News from Smithers Rapra (31 July 2003)
Threaded insert fits honeycomb panels
Rotaloc (Europe) has extended the diversity of its composite fastener range with the introduction of a threaded insert for honeycomb panels that is also available in plain ferrule form.
News from Rotaloc (Europe) (31 July 2003)
Compact curtain protects smaller machines
The MicroSafe Flexible MCF4700 Series of safety light curtains can be mounted on small machines where a standard light curtain would be too large.
News from Omron Scientific Technologies (31 July 2003)
Angle sensor produces drive to right wrongs
The ETS90SL is a microprocessor controlled single-axis angle sensor that includes control circuitry to drive a DC motor up to a maximum of 4A. Brochure Available
News from Assemtech Europe (30 July 2003)
Low cost float switches for level sensing
Assemtech Europe has added to its extensive range of switch and sensor products a large range of vertical and horizontal plastic and stainless steel floats. Brochure Available
News from Assemtech Europe (30 July 2003)
Polyester film goes to extremes
Autotype has upgraded its existing Autotex UV textured polyester film to offer exceptional performance under extreme operating conditions. Brochure Available
News from MacDermid Autotype (30 July 2003)
Eliminate a primary cause of engine wear
FilterMag comprises a set of magnets arranged in a half cylinder shape that simply clamps itself on the outside of a standard spin-on filter. Brochure Available
News from Blue Diamond Technologies (30 July 2003)
Oil-free compressors extend to 1000kW
Boge can now offer air- or water-cooled oil-free compressors from 45 to 355kW. Brochure Available
News from Boge Compressors (30 July 2003)
Award for novel process safety software
Curvaceous Software has won the EPSC 2003 award for the biggest single contribution to improved process safety. Brochure Available
News from Curvaceous Software (30 July 2003)
Walker reinforces sales operations
DLoG (UK) has strengthened its senior sales team with the appointment of Charles Walker as Account Manager for northern area customers.
News from DLoG (UK) (30 July 2003)
Switches take charge of shutdown operations
User Application Article BP chemicals came to EAO for help in specifying and designing state-of-the-art controls for its central command centre at Saltend, UK. Brochure Available
News from EAO (30 July 2003)
New name for German DC motors
Gefeg has sold its Hannover-based operation, Gefeg Antriebstechnik Hannover, to Kahlig Elektrotechnik, which has renamed the business Kahlig Antriebstechnik. Brochure Available
News from EMS (30 July 2003)
Cleaning up in the West Country
User Application Article A leading manufacturer of roll-formed driveline components with an international automotive customer base has yet again chosen Guyson International as its preferred wash plant supplier. Brochure Available
News from Guyson International (30 July 2003)
Growing range of plastic products
Barely a year since the publication of its main catalogue, Heyco's range of plastic products is growing to such an extent that the company has had to publish a 100 page new product supplement. Brochure Available
News from Anixter Components (30 July 2003)
Small, light and quiet claims for linear bearings
When a small, lightweight, quiet running, high-speed linear bearing system is required, Igus reckons its new TK-04 range offers the complete solution. Brochure Available
News from Igus UK (30 July 2003)
Spray valve boasts consistent, repeatable coverage
The Fisnar SV1217 spray valve provides a finely controlled, adjustable spray for low to medium viscosity fluids and coatings.
News from Intertronics (30 July 2003)
Building block for digital motion control
The PIIPM15P12D007 is a servo and motor drive module, rated at 1200V 15A, which includes the bridge, brake and inverter (BBI) functions into one unit.
News from International Rectifier (30 July 2003)
Online evaluation of vision applications
Visitors to the Industrial Technology Systems website can now submit their vision application requirements for evaluation by the ITS vision team.
News from Industrial Technology Systems (ITS) (30 July 2003)
Website upgrade signals end for printed catalogue
Test and measurement equipment managers can now access one of the world's largest rental inventories online through Livingston's new website and web-based catalogue. Brochure Available
News from Livingston UK (30 July 2003)
Seminars cover benchtop technologies
MCP Tooling Technologies is looking for engineers who want to know more about benchtop injection moulding and vacuum casting. Brochure Available
News from MCP Tooling Technologies (30 July 2003)
Serial industrial devices gain PC link via USB
The NPort 1200 Series is a new line of USB-to-serial hubs that expand Moxa's product line into a new application field.
News from Moxa Technologies (30 July 2003)
Living in a material world
An award from NESTA is to fund a unique lab space that will bring together a collection of all new and advanced materials and introduce new avenues to traditional methods of scientific research.
News from NESTA (30 July 2003)
Signal convertors put fibres in the net
Intrinsically noise-immune fibre-optic links for short and long distances can now be incorporated easily and cost-effectively into DeviceNet, CANopen and SafetyBus p networks.
News from Phoenix Contact (30 July 2003)
Filters keep metallising exhausts green
User Application Article Parker Balston vacuum pump exhaust filters ensure that exhaust levels from metallising processes at Amcor Flexibles Camvac's Thetford production facility meet environmental requirements. Brochure Available
News from Parker Hannifin - Filter Division (30 July 2003)
Sintered metal filter removes solids and liquids
A new range of cleanable stainless-steel sintered metal filter cartridges can be used in high-temperature gas or liquid applications to filter particulates sized from 5 to 100um. Brochure Available
News from Parker Hannifin - Filter Division (30 July 2003)
Choke production on full throttle
In response to increasing demand for power quality equipment, specialist manufacturer Reo has invested substantially in two new fully automatic coil-winding machines. Brochure Available
News from REO (UK) (30 July 2003)
UPS range extends to 1000kVA
Siel UPS Systems has recently extended its Safepower UPS range with the addition of a single module rated at 1000kVA.
News from Siel UPS Systems (30 July 2003)
Bearing range improves accuracy and load ratings
SKF has developed a range of linear ball bearings that gives improved accuracies and load ratings, a smoother performance and a reduction in noise. Brochure Available
News from SKF UK (30 July 2003)
Automation outsourcing gains acceptance
Square One Systems Design is widely considered to be one of the most innovative of a new generation of automation outsource companies.
News from Square One Systems Design (30 July 2003)
Pneumatic actuators take on quarter-turn duties
New from Tomoe Valve, the G Series pneumatic actuator range is designed for optimum performance on quarter turn applications.
News from Tomoe Valve (30 July 2003)
Guides go full circle
User Application Article When Mirage Machines launched its portable milling machine, the level of accuracy and reliability provided by THK's integral circular guide was no illusion.
News from THK UK (30 July 2003)
Heads speed soldering and bonding operations
A new family of air-actuated heads is specially designed to address pulsed heated hot bar reflow soldering applications.
News from Acal TC (30 July 2003)
Risk assessment - the machine builder's dilemma
Technical Background Article Proper risk assessment in line with the regulations and standards is now more important than ever, particularly in today's litigious climate, says Richard Poate.
News from TUV Product Service (30 July 2003)
Student racers seek sponsors for Aussie campaign
A team of engineering students who have just graduated from the University of Bath are aiming to beat the Aussies in their own back yard when they compete in the Australian Formula Student 2003 event.
News from University of Bath (30 July 2003)
Rapid tooling enables Space Station mission
User Application Article The unique Low Cost Tooling for Composites system (LCTC) developed by Boeing and RenShape Solutions tooling division, has achieved another first.
News from Huntsman Advanced Materials (30 July 2003)
Outstanding service wins award
Wilo Salmson Components has been awarded "Exzellenz Supplier Quality 2003" by Vaillant Hepworth Group, the largest European manufacturer of domestic heating and hot water systems.
News from Wilo (UK) (30 July 2003)
Vacuum compatible positioning systems
Anorad has published a new brochure on "Vacuum compatible positioning systems".
News from Anorad UK (29 July 2003)
Steady growth for high-power AC drives worldwide
The worldwide market for high-power AC drives is expected to grow at a compound annual growth rate of 5.7% over the next five years.
News from ARC Advisory Group (29 July 2003)
Stainless steel reinforcement in bridges
A new CD ROM from the British Stainless Steel Association contains a previously unpublished report on the "The use of stainless steel reinforcement in bridges".
News from British Stainless Steel Association (29 July 2003)
Distributor conference buoyed by sales growth
Cedip Infrared Systems has predicted that positive half year results and a strong programme of new product introductions should lead to around 40% growth in 2003 sales. Brochure Available
News from Cedip Infrared Systems (29 July 2003)
Building block for custom control solutions
With a range of sensing inputs and control outputs, the Cool Man 6 is supplied preprogrammed to user specifications.
News from DeltaSense (29 July 2003)
Technopolymer latches offer recessed keys
CQT latches are suitable for environments corrosive to other materials as they resist solvents, oils, greases and many other chemical agents. Brochure Available
News from Elesa (UK) (29 July 2003)
Course aims to simplify frequency analysis
A new course promises to unravel the intricacies of noise and vibration frequency analysis for any novices or those simply looking to refresh their knowledge.
News from Bruel and Kjaer UK (29 July 2003)
Sasol standardises its process knowledge
Sasol Germany Moers has signed a contract to standardise all of its plant operations on Honeywell's Experion PKS process knowledge system.
News from Honeywell Industry Solutions (29 July 2003)
Software puts science into juice preparation
User Application Article The implementation of InBatch at Appletiser's juice preparation plant provides flexible batch processing within a multiple recipe environment.
News from APV (29 July 2003)
Catalogue features advanced I/O modules
Interlink BT reckons its new catalogue contains the industry's broadest line of network products for DeviceNet, Profibus-DP and Industrial Ethernet.
News from Interlink BT (29 July 2003)
Spectrometer boasts affordable high performance
The latest addition to the Ultima family of ICP spectrometers is claimed to deliver affordable high performance and reliability.
News from Horiba Jobin Yvon (29 July 2003)
Sealless pumps reduce risk of leaks
The Dickow NM centrifugal pump is ideally suited to handling aggressive liquids because its magnetically coupled design eliminates the need for seals.
News from Michael Smith Engineers (29 July 2003)
Award for Irish mould maker
Avenue Mould has won the Plastics and Rubber Weekly toolmaker of the year award, after three consecutive years on the shortlist for this category of the Plastics Industry Awards.
News from Moldflow (Europe) (29 July 2003)
Insight into new capabilities
Version 4.1 of Moldflow Plastics Insight features enhancements in 3D capability, pre- and post-processing productivity improvements, new simulation capabilities and new hardware support.
News from Moldflow (Europe) (29 July 2003)
Italian gearboxes boast 50% longer life
Italian gearbox manufacturer Varvel has developed a new range of inline helical gearboxes.
News from NBC Group (29 July 2003)
Economical option solves casting problem
User Application Article Recent problems of casting some very accurate panels, designed for aesthetic improvements to complex video/cinematic control consoles have been overcome by Norse Precision Castings of Bedford.
News from Norse Precision Castings (29 July 2003)
Grant aids breakthrough heat transfer technology
A revolutionary breakthrough in heat transfer technology is being developed by Ashe Morris thanks to a GBP 100,000 investment from NESTA.
News from NESTA (29 July 2003)
Welding supply keeps it clean
The Orbimat 160CR is a clean-room version of there popular Orbimat 160C orbital welding power supply.
News from Orbimatic (29 July 2003)
Bulletin features threaded access hardware
An updated 28-page bulletin profiles the expanded family of PEM threaded "access hardware" fastener products.
News from PennEngineering (29 July 2003)
Controller simplifies sample positioning
The ProScan II stepper motor controller for micropositioning and microinspection incorporates both USB and RS232 serial communications. Brochure Available
News from Prior Scientific (29 July 2003)
Sensors check for water ingress onboard
PSM's Bulksafe water ingress detection monitoring and alarm system draws on almost 30 years of experience in supplying monitoring and alarm systems in shipboard liquid levels to provide a robust, reli
News from PSM Instrumentation (29 July 2003)
Platable compounds form electronic circuits
User Application Article Cybershield uses a variety of platable systems from RTP Company to provide custom engineered solutions for the electronics industry.
News from RTP Company (29 July 2003)
Springs save supermarket staff
User Application Article Spiroflex constant force springs have been used in a novel sign hanger by Flex-signs.
News from Spiroflex (29 July 2003)
Help with DSEAR compliance
A new brochure outlines the requirements of the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR).
News from Sira (29 July 2003)
Improved design for sensor connectors
Surya Switchgear is now offering all the versatility of the M8 and M12 sensor connectors in a new design.
News from Surya Switchgear (India) (29 July 2003)
Laser sensors handle reflective targets
Schmitt Europe has extended its range of high precision industrial measurement and gauging solutions with the introduction of the AR-200 family of short range, laser measuring sensors. Brochure Available
News from Schmitt Europe (29 July 2003)
Connect parallel offset shafts without side loads
Schmidt offset couplings are designed for large parallel offset shaft applications where possible damaging side loads or misalignments may be encountered. Brochure Available
News from Zero-Max (29 July 2003)
Single-phase range offers flexible options
AEG has launched a new range of single-phase induction motors that offers the machine builder and the user an extended range for application choice.
News from Lafert Electric Motors (28 July 2003)
Easy installation for "plug and play" cylinder
Asco Joucomatic's new "plug and play" PEC cylinder allows up to 30% to be saved on the costs of installing traditional pneumatic cylinder control circuits. Brochure Available
News from Asco Numatics (28 July 2003)
Vision system keeps bottle production on track
User Application Article A newly installed vision system ensures that every bottle leaving the Algroup Wheaton Mays Landing plant is entirely free from imperfections. Brochure Available
News from Cognex UK (28 July 2003)
Aluminium tube aims for automotive expansion
A new electric resistance-welded aluminium tube is suitable for hydroforming, offering lightweight design and performance benefits for vehicle manufacturers. Brochure Available
News from Corus Automotive (28 July 2003)
Free upgrade training for latest software
Delcam is offering free upgrade training to all users of its PowerInspect software for the inspection of prototypes, tooling and sample parts against CAD data. Brochure Available
News from Delcam (28 July 2003)
Merger helped by ECUK developments
It is becoming clear that growing appreciation of ECUK's role as guardian of standards for registration is enabling radical thinking on the future form of the profession.
News from Engineering Council (28 July 2003)
Smart doors for special cabinets
Aluminium doors and instrument panels are an essential feature of some applications, such as in electronics on controls desks or for display panels. Brochure Available
News from Emka UK (28 July 2003)
Conference to focus on PLM solutions
ESI Group will hold its 13th European conference and exhibition on 16th and 17th October 2003, in Mainz, Germany.
News from ESI Group (28 July 2003)
Hart seminar is a real eye-opener
The Hart Communication Foundation (HCF) is offering a special half-day "Basics of Hart" seminar presented by HCF Chief Engineer Wally Pratt.
News from Hart Communication Foundation (28 July 2003)
Production planning solution for Nippon Oil
Under a new software licensing agreement, Nippon Oil Corp is to expand its use of AspenTech's production planning solution to its entire network of seven refineries.
News from Aspen Technology (28 July 2003)
In-context visualisation aids design reviews
ICEM is pioneering real-time styling and engineering management reviews with an innovative suite of "in-context visualisation" tools.
News from ICEM (28 July 2003)
Control system saves on seal water
Dramatic seal water savings of up to 97% are now available from a new water control system launched by Safematic.
News from Crane (28 July 2003)
Building Kit System for heavy-load environments
Item, as the pioneer of the MB Building Kit System, has launched a completely new range specifically for use in heavy-load environments. Brochure Available
News from Machine Building Systems (28 July 2003)
Indicator takes calculations onboard
One of the latest innovations in Mitutoyo's extensive portfolio of gauges is the new IDC ABS Digimatic calculating indicator. Brochure Available
News from Mitutoyo (UK) (28 July 2003)
Tractor maker powers up to ultrasonic measurement
User Application Article When the UK plant of the world's largest manufacturer of agricultural machinery uses the USM-II ultrasonic bolt tension instrument to monitor the precise tension required in cylinder head bolts. Brochure Available
News from Norbar Torque Tools (28 July 2003)
Key source for precision optical mounts
Two new technical datasheets from Optical Surfaces detail the company's comprehensive range of precision optical mounts.
News from Optical Surfaces (28 July 2003)
Faraday meets Fraunhofer in Anglo-German accord
The Prime Faraday Partnership has strengthened its European credentials by welcoming the Fraunhofer TEG, based in Stuttgart, as an associate partner.
News from Electronics Enabled Products KTN (28 July 2003)
Profinet technology and application guide
The all-new 32-page "Profinet technology and application guide" provides detailed information on this new communication standard.
News from Profibus Group (28 July 2003)
Desktop robot offers large working area
A new high-speed, high-precision desktop robot offers an increased working area for applications such as screw-tightening, dispensing, soldering, and resistance and laser welding.
News from Acal TC (28 July 2003)
Website offers expert advice on welding
The latest update to the Townsend Coates website features a powerful troubleshooting tool for resistance welding applications.
News from Acal TC (28 July 2003)
Resistance control aids welding repeatability
A novel "resistance set" feature reduces contact resistance prior to the application of welding current, allowing users to achieve more repeatable resistance welding results.
News from Acal TC (28 July 2003)
Big turnout for welding show
Earlier this month more then 100 interested parties from the steel, shipbuilding, automotive and pipe-work industries attended a two-day free event at the new TPS-Fronius site in Alton.
News from TPS-Fronius (28 July 2003)
Eureka grant funds automation research
A Nottingham company is among the 36 research projects sharing GBP 5.4 million, the largest DTI payout in recent years to Eureka projects.
News from TQC (28 July 2003)
Compact monitor keeps track of weld quality
The MG3 series of compact colour digital weld monitors is designed to measure and monitor current, voltage and displacement.
News from Unitek Miyachi Corp (28 July 2003)
National recognition for Bath academics
Two senior academics at the University of Bath have been elected Fellows of the Royal Academy of Engineering.
News from University of Bath (28 July 2003)
Three phases for compact power units
Weidmuller has added a three-phase 24V nonstabilised linear supply to its range of 24V single-phase compact power units.
News from Weidmuller (UK) (28 July 2003)
Steel square weldable cam action indexing plungers
JW Winco now offers steel square weldable cam action indexing plungers.
News from Winco (28 July 2003)
Safety torches are visibly better in yellow
Wolf Safety is celebrating the success of its new ATEX Safety Torch range.
News from Wolf Safety Lamp Company (28 July 2003)
Partial discharge detection testing for HV systems
Wyko's Condition Monitoring unit has developed a new highly accurate method of partial discharge detection testing for high-voltage (HV) systems, including motors, switchgear and transformers. Brochure Available
News from Eriks UK (28 July 2003)
Total number of news releases published during the week: 134
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
