News releases on Engineeringtalk categorised by date
Sunday 16 November
to Saturday 22 November 2003
Solutions centre showcases robot range
ABB has invested more than GBP 300,000 in key new customer service facilities at its Automation Technologies Division operations centre in Milton Keynes. Brochure Available
News from ABB Robotics (21 November 2003)
User interface simplifies piping system design
The latest version of the PipePak piping system design and analysis software makes it easier for engineers to design entire piping systems.
News from Algor (21 November 2003)
Electromagnetic simulation software moves on
Maxwell v10 is heralded as a significant advance in the state of the art in 3D/2D electromagnetic simulation software for the analysis of electromagnetic and electromechanical devices.
News from Ansoft Europe (21 November 2003)
Upgrade for extrusion automation controller
BCI Autopilot v2.0 offers extrusion operators all the power of its predecessor, plus increased data management performance, greater operator flexibility and an easier user interface.
News from Bachelor Controls (21 November 2003)
University to honour Land Rover boss
The Chairman and Chief Executive Officer of Jaguar and Land Rover is to receive an honorary degree of Doctor of Technology for his outstanding services to the automotive industry.
News from Coventry University (21 November 2003)
Intelligent coupling technology for drive analysis
Datum Electronics has a new range of instrumentation that can be fitted to most couplings and drive shafts to provide drive analysis and condition monitoring.
News from Datum Electronics (21 November 2003)
PAT system brings speedy results
Faster and more accurate portable appliance testing reports can now be achieved following the development of a GBP 300,000 scheduling, control and reporting system by Epsilon Test Services.
News from Epsilon Test Services (21 November 2003)
Working with dangerous substances
A European conference on how to reduce the risks of working with dangerous substances will be held at the Euskalduna Conference Centre, in Bilbao, Spain, on the 24th November 2003.
News from European Agency For Safety And Health At Work (21 November 2003)
Fieldbus organisations aim for interoperability
Three leading organisations dedicated to control network technology have completed the initial phase of development for key extensions to Electronic Device Descriptions defined in IEC61804-2.
News from Fieldbus Foundation (21 November 2003)
Digital plant architecture cuts cabling costs
The Eastman Chemical Company has cut cable costs by 30% and reduced the time taken to commission process loops by using PlantWeb digital plant architecture and Foundation fieldbus.
News from Emerson Process Management - Systems and Industry (21 November 2003)
Refinery-wide modelling optimises performance
Aspen Refsys enables refining companies to optimise refinery performance using an integrated simulation model of their facilities.
News from Aspen Technology (21 November 2003)
Johnstone scoops award
Grace Johnstone, 27, a Flight Test Engineer for BAE Systems at Warton Aerodrome, Lancashire has been awarded the prestigious title "Young Woman Engineer of the Year 2003", by HRH The Princess Royal.
News from Institution of Incorporated Engineers (21 November 2003)
Griffiths to support SMEs
Leading business consultant John Griffiths has been appointed as East Midlands Regional Manager for InvoRed.
News from InvoRed (21 November 2003)
HMI software runs on tablet PCs
The Wonderware InTouch human-machine interface (HMI) software is the first industry-leading HMI to support the Microsoft Windows XP Tablet PC Edition operating system.
News from Invensys Wonderware (21 November 2003)
Website dedicated to ArchestrA
The Wonderware and ArchestrA business units of Invensys Systems have launched the ArchestrA Community website at www.ArchestrA.biz.
News from Invensys Wonderware (21 November 2003)
Regional companies encouraged to go green
Cedar is a new ecodesign training and consultancy service established to assist electrical and electronics companies within the Midlands to meet new legislation from Europe.
News from Loughborough University (21 November 2003)
Upgrade for noise and vibration measurement
SmartOffice is M+P International's advanced solution for noise and vibration measurement, analysis and reporting.
News from M+P International (21 November 2003)
Investment expands European pump facilities
Moog has completed the construction of a new facility for the manufacture of radial piston pumps in Nuremberg, Germany. Brochure Available
News from Moog Controls (21 November 2003)
Servo controller speeds hydroforming process
User Application Article The M3000 digital servo controller is ideal for the complex pressure and motion profiles required in hydroforming or any other metal forming application. Brochure Available
News from Moog Controls (21 November 2003)
Portable air gauge incorporates digital indicator
Mahr Federal has introduced a new concept in air gauging - portability.
News from Mahr Federal (21 November 2003)
Website goes back to school
Mitutoyo has created a dedicated website for the education sector. Brochure Available
News from Mitutoyo (UK) (21 November 2003)
Laser scanning probes upgrade CMMs
Laser scanning devices have become a well established technology, which is now available for use on CMMs. Brochure Available
News from Mitutoyo (UK) (21 November 2003)
Putting the brake on linear motors
High-speed linear motors in CNC lathes reduce machining down time and maximise production efficiency, but high-performance brakes are crucial to their safe operation.
News from Mayr Transmissions (21 November 2003)
More than just a battery charger
The Powerterm is a combined power supply and battery charger suitable for DIN rail mounting and ideal for RTUs, dataloggers, alarm systems, remote field instrumentation and remote access systems. Brochure Available
News from Omniflex (UK) (21 November 2003)
Floating panel fasteners handle misalignment
A new panel fastener can compensate for mating hole misalignment of up to 1.52mm and can be installed into any panel material.
News from PennEngineering (21 November 2003)
Stronger bonds for Peek/FKM composite seals
High performance seals specialist, Precision Polymer Engineering has developed a new method of bonding fluorinated elastomers to the engineering plastic polyetheretherketone.
News from Precision Polymer Engineering (21 November 2003)
Elite joins the select few
Pantek has awarded membership of its prestigious Certified System Integrator (CSI) Programme, to West Lothian based Elite Control Systems.
News from SolutionsPT (21 November 2003)
Assessment tools prove the worth of training
Rockwell Automation has developed a new suite of skills assessment tools designed to maximise the benefits of its training courses.
News from Rockwell Automation (21 November 2003)
Explosion-proof switchboxes excite demand
This year's introduction of ATEX-certified explosion-proof switchboxes has created a much higher level of demand than could have been predicted, says valve accessories specialist Rotork Valvekits.
News from Rotork Valvekits (21 November 2003)
Precision components aid DNA research
User Application Article The successful production of some of the vital components used for mapping the human genome is a result of a long-standing relationship with two Cambridgeshire-based companies.
News from Shearline Precision Engineering (21 November 2003)
More options for basic controller family
The PneuAlpha range of easy to use, compact, stand-alone programmable controllers provides simple, inexpensive, low-level control for industrial as well as domestic applications.
News from SMC Pneumatics (UK) (21 November 2003)
SMS text messages aid remote monitoring
The novel GSM Alarm allows remote monitoring of up to eight inputs, with alarm messages sent via SMS.
News from SeNd Technology (21 November 2003)
Steam systems training promises payback
A new training course comes with a money-back guarantee if energy savings equal to double the course's cost are not achieved within one year.
News from Spirax Sarco (21 November 2003)
Making the most of production
Strategic reasons for manufacturers to keep production in the UK will be spelled out in a Government-sponsored report being presented at Birmingham's Technology Innovation Centre later this month.
News from Technology Innovation Centre (21 November 2003)
Pipe coupling slashes time and effort
The new AquaFast range of couplings and flange adapters for polyethylene and PVC pipes make the installation of pipe joints simpler and quicker than ever. Brochure Available
News from Viking Johnson (21 November 2003)
Meter monitors power on a budget
The Nemo 96 3DSH is a cost effective solution to most customer energy metering requirements. Brochure Available
News from Vydas International Marketing (21 November 2003)
Powerful but low-cost data logging solution
The LabJack U12 USB DAQ unit and the DAVlogger data-logging software combine to form a powerful but low-cost data logging solution.
News from Audon Electronics (20 November 2003)
Distribution deal moves up a gear
Amplicon has recently been recognised as one of the principal global distributors for Taiwanese Data Communications company Moxa Technologies.
News from Amplicon (20 November 2003)
Vent allows gas to escape
A novel FOOG (filtered outlet outgassing) vent allows gas to escape from a container or bag during processing Brochure Available
News from Brownell (20 November 2003)
New name in fluid systems
The Clearwater Group has formed a new subsidiary - Clearwater Systems - to harness the capabilities of its automotive and machining industry expertise.
News from Clearwater Group (20 November 2003)
CAM software offers easier programming
The latest release of Delcam's PowerMill CAM software offers easier programming despite the inclusion of an even wider range of strategies. Brochure Available
News from Delcam (20 November 2003)
SOS process provides robust pressure transducers
A novel high-pressure sensor is capable of accurately measuring vibration, torque, force or pressure in extreme temperatures and adverse conditions over a long duration.
News from ESI Technology (20 November 2003)
Cambridge engineers attend pneumatics master class
Graduate level engineers from Cambridge University recently attended the prestigious Festo UK headquarters at Northampton for a master class in pneumatics technology. Brochure Available
News from Festo (20 November 2003)
Manufacturing excellence well received
The Manufacturing Excellence conference, sponsored by Emerson Process Management and entitled "Automation in the Irish pharmaceutical industry", was a great success.
News from Emerson Process Management - Systems and Industry (20 November 2003)
It pays to take good care of coolant
Filtration Service Engineering has a new series of cutting fluid "care" products, following its appointment as UK distributor for a leading range of coolant equipment made in the USA.
News from Filtration Service Engineering (20 November 2003)
Indian study completed
Foster Wheeler Energy has successfully completed a technical due diligence study for the Hindustan Petroleum Corporation, the second largest refining and marketing oil company in India.
News from Foster Wheeler (20 November 2003)
Cost-effective expansion for DIN-rail power
Lambda has added two new models to its lead-free DLP series of DIN-rail mounted AC/DC supplies. Brochure Available
News from Lambda (20 November 2003)
Time to remove US steel import tarriffs
Global steel market conditions have presented President Bush with an opportunity to do the statesmanlike thing, according to the latest European Steel Review.
News from MEPS (International) (20 November 2003)
Machine tool sector set for recovery
The UK machine tool sector is set for a significant recovery in 2004, according to the latest MTA survey.
News from Manufacturing Technologies Association (20 November 2003)
Current repeaters solve loop woes
Omniterm LPI and LPX current repeaters are designed to isolate instrument current loops from circulating ground currents that can cause system inaccuracies, or at worst instrument failure. Brochure Available
News from Omniflex (UK) (20 November 2003)
Thermometer takes the heat to 1300C
The TMDT 1300 is a portable dual-channel digital thermometer that provides high-accuracy temperature measurement from -50 to +1300C. Brochure Available
News from SKF UK (20 November 2003)
Wide-tolerance couplings solve problems
The UltraGrip range of wide-tolerance couplings, flange adapters and end caps, originally developed for the demanding specification of the German water industry, are now available in the UK. Brochure Available
News from Viking Johnson (20 November 2003)
Ancient robot gains gold watch
User Application Article A leading UK manufacturer of supermarket trolleys and roller containers is staking a claim to owning the country's oldest computer-based robot. Brochure Available
News from ABB Robotics (19 November 2003)
Load switches offer protection as standard
ABB's complete range of enclosed load break/switchfuses from 20 to 800A enables installers to specify a robust IP65 rated enclosurefor less than the cost of most basic IP41 enclosures.
News from ABB Automation Tech (LV Products) (19 November 2003)
Maple models motion of robotic arm in space
User Application Article The Canadian Space Agency is testing the design of its manipulator for the International Space Station using Maple. Brochure Available
News from Adept Scientific (19 November 2003)
Sensor spots liquid at the cost of a switch
The TANEWS1 is a novel sensor that detects the presence of liquid.
News from Active Switch and Sensor (19 November 2003)
Model library aids energy system design
A new model library aims to help engineers design and optimise alternative and hybrid energy systems.
News from Ansoft Europe (19 November 2003)
Steel belts pack a punch
User Application Article The diverse and complex nature of the packing industry opens up a multitude of design applications for the stainless-steel belt range supplied by Belt Technologies Europe.
News from Belt Technologies Europe (19 November 2003)
Pulleys shrink to fit
The Challenge Mi-Lock range consists of lightweight cast-iron pulleys with grooves allowing the use of A/SPA and B/SPB section belts.
News from Challenge Power Transmissions (19 November 2003)
Honorary degree for land speed car designer
Tomorrow the engineering designer of the new world land speed record car, Thrust SSC will receive an honorary degree for his outstanding services in the field of engineering design.
News from Coventry University (19 November 2003)
Microtec gains Power Solution deal
Delcam has appointed Microtec as a representative for its Power Solution range of CADCAM software in southern Germany. Brochure Available
News from Delcam (19 November 2003)
Flexible application for servo amplifiers
The Geo Drive family of universal motor drive amplifiers consists of one- and two-axis three-phase servo amplifiers that support a wide variety of motor types, power ranges and user interfaces.
News from Delta Tau UK (19 November 2003)
Intensifier is general-purpose replacement
EPSI offers an intensifier module specifically designed to replace older and/or damaged intensifier units, regardless of the original intensifier manufacturer or hydraulic system supplier.
News from Engineered Pressure Systems (19 November 2003)
Translation service for 3D parts and assemblies
Elysium has set up a per-file translation service using its leading and highly effective 3D CAD data translation technologies.
News from Elysium (19 November 2003)
Distribution for novel fluid conditioner
Fluid Conditioning Systems has appointed Erodex of Birmingham, England as its distributor for the wire EDM sector in the UK and Ireland.
News from Fluid Conditioning Systems (19 November 2003)
Bearing isolator keeps oil cleaner
A new noncontact bearing isolator can reduce the ingress of water and particles in oil - a major cause of premature bearing failure.
News from Garlock (Great Britain) (19 November 2003)
O-rings made form many materials
O-rings in more than 100 general and high-performance elastomers are now precision-moulded by James Walker at its rapidly expanding Cockermouth plant in Cumbria, UK. Brochure Available
News from James Walker and Co (19 November 2003)
Bonding fasteners are speedy alternative
Jetloc bonding fasteners offer manufacturing and automotive industries an opportunity to save money without compromising on quality.
News from Jet Press (19 November 2003)
Lubricant gains food-grade approval
Good news for all those using Barrierta L 55/2, the high-temperature and long-term lubricant up to 260C. Brochure Available
News from Kluber Lubrication GB (19 November 2003)
Multiposition airless cylinder for precise control
A new new electric actuator complements Norgren's existing range of pneumatic cylinders.
News from Norgren (19 November 2003)
All-digital servo gains IEC61131-3 programming
A raft of new modular hardware and software options significantly extend the functionality of the latest-generation Compax3 intelligent servo drive. Brochure Available
News from Parker Hannifin Electromechanical Automation (19 November 2003)
DeviceNet plug integrates cable glands
A special plug connector from Phoenix Contact's Variosub range is now available for DeviceNet applications in harsh environments.
News from Phoenix Contact (19 November 2003)
Probe puts wiring to the test
The new P14/G from Peak Test Services is a threaded probe designed for use in testing cable harnesses and automotive electrical systems.
News from Peak Test Services (19 November 2003)
Test lab investigates corrosion and wear
Poeton has recently expanded its environmental test facilities to include a new corrosive/wear rig that will produce new data on the performance of its Apticote protective coatings.
News from Poeton Industries (19 November 2003)
Versatile 1U solution for serial integration
The STS Series is a secure terminal server with a wireless interface for managing multiple serial devices over a network.
News from Sena Technologies (19 November 2003)
Butterfly valves combine reliability with economy
A series of new, high-quality, reliable and economical butterfly valves is available for general-purpose industrial applications.
News from Tyco Flow Controls (19 November 2003)
Slim profile for inline M8 integrator
The new SAI-M8 inline passive integrator meets customer demand for a slim M8 integrator.
News from Weidmuller (UK) (19 November 2003)
Handheld dewpoint meter claims total capability
The latest SADP mini automatic dewpoint hygrometer from Alpha Moisture Systems is expected to set new industry standards for equipment of this type.
News from Alpha Moisture Systems (18 November 2003)
A new era in data recording
Technical Background Article Martin Binney of ABB explains the benefits that electronic data recorders can bring and how they can be used to transform the way in which process data are collected and used.
News from ABB Automation Tech (Instrumentation + Automation) (18 November 2003)
Pressure transmitters provide comprehensive range
The new FieldIT 2600T pressure transmitter series offers one of the most complete ranges of pressure measurement equipment currently available.
News from ABB Automation Tech (Instrumentation + Automation) (18 November 2003)
Course gains City and Guilds accreditation
Aberdeen Skills and Enterprise Training (ASET) has been awarded City and Guilds accreditation for its competence-based HVLV switching course.
News from ASET (Aberdeen Skills and Enterprise Training) (18 November 2003)
Dry air helps CNC machines
User Application Article Two Boge SD40 oil-cooled screw compressors with integral dryers have solved several major problems for precision engineer JJ Churchill, based in Nuneaton. Brochure Available
News from Boge Compressors (18 November 2003)
Service takes responsibility for calibration
A new cost-effective fully managed service for the calibration of test equipment leaves operators and managers free to concentrate on their primary function.
News from Calibration Centre (18 November 2003)
Chinese companies offer "enormous opportunities"
China is now increasingly recognised as being one of the world's major locations for the research, development and manufacture of high technology products.
News from DTI Global Watch Service (18 November 2003)
Budget UV sensor outperforms big vision systems
The UVX 300 is a novel UV luminescence sensor claimed to detect targets more reliably than vision systems that typically cost ten times more. Brochure Available
News from EMX Industries (18 November 2003)
Electromagnetic flowmeter measures channel flow
User Application Article Yorkshire Water is using a ChannelMag "pulsed AC" magnetic flowmeter from Arkon Flow Systems to measure raw sewerage in a 3m-wide channel at Esholt Sewage Treatment Works.
News from Flow Measurement (18 November 2003)
Turn it off to save money
Technical Background Article UK industry is missing out on opportunities for energy saving in its largest area of motor operations, says James Bowler of Fairford Electronics.
News from Fairford Electronics (18 November 2003)
Nascar team pioneers use of CFD software
Fluent has signed an exclusive sponsorship agreement with Dale Earnhardt of Mooresville, North Carolina.
News from Fluent (18 November 2003)
Novel fixtures help automotive testing
A novel dedicated sample grip helps test the strength of electrical terminals on power steering pump motors.
News from Lloyd Instruments (18 November 2003)
Gravimetric device measures large loads accurately
The ESM series of gravimetric measuring devices is intended for filling level measurements with all types of silos, vessels and tanks that are not subject to statutory calibration. Brochure Available
News from HBM UK (18 November 2003)
Woodside prefers Honeywell
Honeywell Process Solutions has been appointed as preferred control systems supplier by Woodside Energy, one of Australia's leading resources companies.
News from Honeywell Industry Solutions (18 November 2003)
Read all about stainless-steel rolling guides
IKO Nippon Thompson's recently launched ML Series of stainless-steel rolling guides is to be detailed in a new catalogue, reference 57128, available soon.
News from IKO Nippon Thompson (18 November 2003)
Reseller upgrades to solutions provider
DriveWorks has today appointed Dasi Solutions as a DriveWorks Solutions Provider.
News from DriveWorks (18 November 2003)
Dry lubrication answers modern product demands
Technical Background Article The trend towards dry lubrication has been borne out of the need for performance, quality, user-friendliness, cost reduction and eco-compatibility. Brochure Available
News from Kluber Lubrication GB (18 November 2003)
Lead screw technology rolls over ball screws
Technical Background Article Lead screws offer the latest technology for motion control, with many distinct advantages, says Tom Solon of Kerk Motion Products.
News from Kerk Motion Products (18 November 2003)
Timken awards mordernisation contract
Morgan Construction Company has received a major contract from Timken Company of Latrobe, Pennsylvania to modernise its bar mill.
News from Morgan Construction Company (18 November 2003)
Upgrade for motor IP ratings
Oriental Motor has increased the IP rating on a selection of its products.
News from Oriental Motor (18 November 2003)
Heavy-duty PVC rollers keep the noise down
A leading manufacturer of heavy-duty PVC rollers is increasing production in a bid to keep up with demand.
News from Pennine Industrial Equipment (18 November 2003)
New group centralises consulting services
Pilz has set up a new Group to provide safety consulting to clients throughout the world.
News from Pilz Automation Technology (18 November 2003)
Miniature panel PC aims for machine builders
With increasing pressures on machine builders to reduce machine sizes and enhance performance while reducing costs, Phoenix Contact has developed a new rugged miniature panel PC for the OEM market.
News from Phoenix Contact (18 November 2003)
Workshop promotes best manufacturing practice
More than 60 UK chemical and process manufacturers attended PICME's one-day workshop on best manufacturing practice at The Heath, Runcorn, Cheshire at the end of last month.
News from PICME (18 November 2003)
Easy-to-fit polymer blocks move Panasonic
User Application Article Innovative polymer block chain from Renold has been installed by Panasonic at its distribution centre in Northampton, to handle a wide variety of products from DVD players to televisions.
News from Renold Chain (18 November 2003)
Sweet success in Jeddah
Geo Robson is close to completing a four-stage upgrade for United Sugar Company's Jeddah plant, making it one of the largest facilities of its kind in the world.
News from Robson Handling Technology (18 November 2003)
Noble Plastics takes on new process
Custom injection moulder Noble Plastics of Lafayette, Louisiana, is the most recent licensee of PowerderFlo metal injection moulding (MIM) technology.
News from RTP Company (18 November 2003)
Offshore comms event set for Houston in 2004
The 4th annual Offshore Communications Conference and Exhibition will be held in Houston, Texas, at the newly renovated Marriott Westchase Hotel and Conference Centre.
News from Technology Systems Corp (18 November 2003)
World's smallest claim for industrial connector
Turck has developed new 3- and 4-pin M5 Pentafast threaded connector products for carrying power and signals to factory automation equipment in pharmaceutical, electronics and semiconductor industries
News from Turck (18 November 2003)
E-book gives tricks and tips for Visio users
"Tailoring Visio 2002" is the latest e-book for new and experienced Visio users.
News from upFront.eZine Publishing (18 November 2003)
Rotory tables take position
Series 4800 rotary tables are used for positioning for assembly, testing and production.
News from Velmex (18 November 2003)
CD is single literature source
A new CD-based document archive gives customers instant access to a wealth of technical, product and application information.
News from Wilo (UK) (18 November 2003)
Multiphysics analysis simulates cylinder head
User Application Article Adiabatics has used multiphysics FEA software to study the thermal and structural behaviour of a novel cylinder head designed to improve diesel engine performance.
News from Algor (17 November 2003)
Seminars focus on industry-specific design
Ansoft has combined with several leading technology organisations to host three seminars focusing on the design of electromechanical systems in aerospace, automotive and alternative power industries.
News from Ansoft Europe (17 November 2003)
Radio transceivers go in one by one
A new miniature all-inclusive 900MHz FHSS transceiver breaks new ground in the short-range wireless market.
News from Aerocomm (17 November 2003)
Intelligent drive improves packaging systems
User Application Article A motion control system based on a stand-alone intelligent drive is providing a flexible upgrade for Kappa's wrap-around packaging machinery. Brochure Available
News from Baldor UK (17 November 2003)
Midlands role for Willson
Castell has appointed Cliff Willson as its new Sales Manager for the Midlands.
News from Castell Safety International (17 November 2003)
Making paper safely
User Application Article Iggesund Paperboard, the UK's largest manufacturer of folding boxboard, is using safety interlocking systems from Castell to ensure risk-free routine access to machinery at its Cumbria-based mill.
News from Castell Safety International (17 November 2003)
Honorary degree for Morgan car boss
Next monday, Charles Morgan the Joint Managing Director of the Morgan Motor Company Limited will be conferred with an Honorary Degree of Doctor of Business Administration by Coventry University.
News from Coventry University (17 November 2003)
Restructuring puts the brakes on UK recruitment
A third of UK employers expect to restructure their businesses over the next 12 months, research from the Recruitment Confidence Index (RCI) has found.
News from Cranfield University (17 November 2003)
Ruggedised notebook acquires pressure data
User Application Article When a three-year PhD research project called for a ruggedised laptop computer that could be carried by individuals through harsh environments, only one machine was up to the job.
News from Dolch Computer Systems (UK) (17 November 2003)
Extreme elastomers are base-resistant
Viton Extreme high performance specialty products are designed to meet demanding performance requirements currently not met by traditional high performance elastomers.
News from DuPont (UK) (17 November 2003)
New name in product lifecycle management
EDS PLM Solutions has changed its name to UGS PLM Solutions.
News from Siemens PLM Software (17 November 2003)
Fluid conditioner prolongs industrial transmission
User Application Article Using Magnom technology for the protection of heavy industrial transmissions has generated major savings by preventing transmission failures that can cost as much as $70,000 a time.
News from Fluid Conditioning Systems (17 November 2003)
Weldex joins Mach in 2006
The 2006 Weldex event is to be held alongside Mach and Subcon at the NEC in April 2006.
News from Nexus Media Communications (17 November 2003)
PLM to support garden tool development
Emak, a worldwide supplier of outdoor power equipment for lawn and garden maintenance, has signed a contract for product lifecycle management solutions and services.
News from IBM Product Lifecycle Management Solutions (17 November 2003)
Software speeds new calculators to market
User Application Article Kinpo Electronics, the world's leading manufacturer of calculators, uses Catia V5 to help significantly shorten its product design time.
News from IBM Product Lifecycle Management Solutions (17 November 2003)
Cam followers feature high load capacities
Three new cam follower products aim to satisfy growing industrial demand.
News from IKO Nippon Thompson (17 November 2003)
Scientific tools are free to download
A small, unobtrusive, desktop toolbar that provides easy access to commonly needed utilities for engineering and scientific calculations is free to download from Motor Technology's website.
News from Motor Technology (17 November 2003)
PXI chassis hosts high-channel-count systems
A new software-configurable 18-slot PXI chassis enables engineers to programmatically configure precise timing and synchronisation signals between modular instruments. Brochure Available
News from National Instruments (17 November 2003)
Safety switches offer a choice of ranges
Pilz Automation Technology has made two new additions to its range of switches suitable for use in safety-critical applications up to Category 4 in accordance with EN954-1.
News from Pilz Automation Technology (17 November 2003)
Fast delivery for 22mm encoder
A new miniature 22mm, ROSE (reflective optical sensing) modular encoder, has been introduced by Pittman and is now included in the PittmanExpress fast delivery service.
News from PennEngineering Motion Technologies - Europe (17 November 2003)
Byrne looks north
Schmersal UK has appointed Peter Byrne as Regional Sales Manager covering the North of England.
News from Schmersal UK (17 November 2003)
Support for aircraft restoration
There is an enthusiastic group of people in Wolverhampton working hard at preserving some of the UK's national treasures.
News from SMC Pneumatics (UK) (17 November 2003)
Process valves offer extensive options
SMC's range of process valves offer the user extensive options, whatever the industry, easily handling wide and diverse applications.
News from SMC Pneumatics (UK) (17 November 2003)
Process control instrumentation available online
A new online resource is set to simplify the purchasing of a wide range of process instrumentation and sensors. Brochure Available
News from Status Instruments (17 November 2003)
Cam locks offer durability and design
A new line of cam locks is designed specifically for panels that require secure key-locking or manual access without compression.
News from Southco (17 November 2003)
Ballscrews to European specs
An extensive new range of standard rolled and precision ground ballscrews has been developed specifically to meet the European DIN69051 part 5 (ISO3408-5) standard.
News from THK UK (17 November 2003)
Balanced approach to quality
Universal Balancing has received certification to the new BS EN ISO9001:2000 quality standard. Brochure Available
News from Universal Balancing (17 November 2003)
Stock components cut semicustom fixture costs
UniSlide assemblies are lead screw/electric motor driven dovetail slide assemblies.
News from Velmex (17 November 2003)
Hub software simplifies remote monitoring
A new machine communications hub simplifies remote monitoring of unattended equipment.
News from World Wide Machines (17 November 2003)
Total number of news releases published during the week: 138
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
