News releases on Engineeringtalk categorised by date
Sunday 19 March
to Saturday 25 March 2006
Integrated motor based on Nema 23 frame
Motor delivers 150 to 300mNm continuous torque in three package sizes, and combines four-pole high-energy, neodymium magnet system of skewed design (for reduced cogging) with three-phase stator.
News from Omnimotor (24 March 2006)
Wireless network keeps track of forklift trucks
RFID device collects data regarding use of the forklift trucks and provides real-time link between forklift trucks in a plant and a PC in the office using an 802.11 wireless network. Brochure Available
News from Lamerholm Electronics (24 March 2006)
Sampler checks for suspended solids
User Application Article Waste-water sampler helps show coating system manufacturer that it has reduced suspended solids and COD levels at its site in Darwen, near Blackburn.
News from Aquamatic (24 March 2006)
Stepper motor connects directly to mains AC supply
Packaged drive can be directly connected to the mains AC supply at 110 to 230V without the need for a transformer, has step and direction command inputs and can supply up to 6A/phase.
News from Total Motion Systems (24 March 2006)
Upgrade to digital design communications tool
Digital design communications tool for the automotive, high technology, aerospace, industrial automation and discrete manufacturing industries can interact with product manufacturing information.
News from Actify (24 March 2006)
690V, 630kW drives suit use of optional fusing
690V drives up to 630kW suit the use of optional fusing and disconnects and have an efficiency better than 98%, reducing heat losses.
News from Danfoss Motion Controls (24 March 2006)
Valve precisely dispenses miniature beads
Two-component miniature mix-dispense valve precisely dispenses miniature beads and very small volumes of low-viscosity pourable materials and abrasive or filled materials.
News from Sealant Equipment and Engineering (24 March 2006)
Driver software expands camera functions
Auto features expand camera so it can automatically control the settings for exposure and gain, enabling the camera to adapt independently to fluctuating light conditions.
News from Adept Electronic Solutions (24 March 2006)
Pursuit Dynamics buys BPT Skerman
Developer and licenser of PDX Sonic technology acquires UK manufacturer and supplier of processing plant, equipment and integrated systems.
News from Pursuit Dynamics (24 March 2006)
Grease is the word for brickwork operator
User Application Article High-temperature long-term grease increases bearing life seven fold at brickwork operator and increases production capacity by 5%. Brochure Available
News from Kluber Lubrication GB (24 March 2006)
Auto-ranging meter for static charge measurement
Meter takes away the guesswork of measuring distance by using an ultrasonic sensor to ensure repeatable static charge readings.
News from Dyne Technology (24 March 2006)
Positioning driver for AC servo motors
Positioning driver for use with AC servo motors is for point to point applications and can set parameters such as velocity, acceleration, deceleration and torque.
News from SMC Pneumatics (UK) (24 March 2006)
Technology grant to fund graduate in industry
Knowledge Transfer grant to develop titanium injection moulding technology for producing medical and biomedical devices will fund a graduate to work in industry for around three years.
News from Morgan Advanced Ceramics (24 March 2006)
Planetary gearboxes to be showcased at exhibition
Drives and Controls Show, which takes place at the NEC between 16th and 18th May, to feature live demonstrations of two-axis linear positioning and transfer modules.
News from Gudel UK (24 March 2006)
Verification technology increases productivity
Software and probes check part specifications during manufacture to save time, reduce scrap and increase confidence that time is not being wasted on components that are too far out of tolerance. Brochure Available
News from Delcam (24 March 2006)
Power topping for pizza firm
User Application Article Power supply increase to cope with growing demand at the headquarters of pizza firm in Milton Keynes involved an installation without disrupting the company's round-the-clock working.
News from ABB Power Technologies (24 March 2006)
Software develops probing routines
Software can be used to develop probing routines for contact and non-contact laser probes, including tool setting, tool breakage detection, part set-up, part inspection and probe qualification. Brochure Available
News from Renishaw (24 March 2006)
Hinge allows 180-degree opening
180-degree hinge in polyamide for installers of larger doors and access panels where 25mm return edges enhance rigidity for electrical control cabinets, heating and ventilating and machine access. Brochure Available
News from Emka UK (24 March 2006)
Materials sector firms sign up for PDM 2006
Plastics Design and Moulding 2006 at the Telford International Centre from 26th to 28th September 2006 is attracting more global brand heavyweights from the materials sector.
News from Emap Maclaren Polymer Group (24 March 2006)
Oxygen sliding agent meets stipulations
Oxygen sliding agent for extreme pressures can safely handle applications in valves, fittings or systems that carry oxygen. Brochure Available
News from Kluber Lubrication GB (24 March 2006)
Makeover makes online buying easier
As the demand for online purchasing increases, motion and fluid control company improves online web store facility to provide more functionality.
News from Norgren (24 March 2006)
Flow meter programmable for specific gas mixtures
Thermal mass flowmeter is for direct mass flow measurement of compressed air, biogas and other utility gas applications. Brochure Available
News from Endress + Hauser (24 March 2006)
Sensor system checks bends on bobsled run
User Application Article Complete measurement chain used in Olympic bobsled run at San Sicario near Turin to monitor the vibration behaviour of the concrete structure and to draw conclusions for optimising the bends. Brochure Available
News from HBM UK (24 March 2006)
Pilot leads to model system adoptation
Model predictive intelligence technology selected as part of manufacturing excellence programme.
News from Pavilion Technologies (24 March 2006)
Software licence trade-in offer extended
Enterprise asset management software licence trade-in offer extended to all other regions and by an extra two months in North America.
News from Invensys Avantis (24 March 2006)
Robots programmed to build aircraft
User Application Article Airbus chooses digital manufacturing system to simulate, validate and program the robotics assembly lines for the latest Airbus aircraft programmes.
News from IBM Product Lifecycle Management Solutions (24 March 2006)
Mathematical modelling provides automated export
Mathematical modelling environment provides automated export to Simulink and lets engineers save time and reduce the risk of error in the model-based design of dynamic systems. Brochure Available
News from Adept Scientific (24 March 2006)
Single or dual channel gas analysis
Process gas analysers use non-dispersive infra-red, ultraviolet and visible spectroscopy, with the sensors selected to use thermal conductivity measurements or oxygen detection technologies.
News from Emerson Process Management (24 March 2006)
Code assembly aids Scada development
Programmers can develop highly customised Scada/MMI applications using Visual Basic or C# for the Microsoft.NET framework using Ingear's NET.ABLink managed code assembly.
News from CimQuest Ingear (24 March 2006)
Easy entry into digital imaging
The Guppy series sets a new price standard for an easy entry into the world of digital imaging.
News from Adept Electronic Solutions (24 March 2006)
PC-based software saves time at MACH
At MACH 2006 Renishaw is showing two new PC-based software products, Productivity+ Active Editor Pro and Renishaw OMV, which offer significant time savings for users of machine tool probe systems. Brochure Available
News from Renishaw (24 March 2006)
Industrial automation training goes global
A novel training programme aims to set global standards for training in industrial automation.
News from ATS International (24 March 2006)
Service promises speedy access to CAD plots
A new UK-wide CAD plotting service offers same-day service and the option of file format conversion.
News from Digiscans (24 March 2006)
Forum focuses on design for manufacture
The International Forum on Design for Manufacture and Assembly is the foremost conference worldwide on DFMA methodologies for product developers.
News from Boothroyd Dewhurst (24 March 2006)
Nuisance free circuit protection on show
Visitors to Electrex from engineering disciplines looking for high precision, nuisance free circuit protection will find products to meet their needs at the Rowe Hankins stand.
News from Rowe Hankins Components (24 March 2006)
Simulation and visualisation software upgraded
Aesthetica Version 2.2 is the latest version of the real-time digital 3D assembly model dimensional and positional tolerances simulation and visualisation software suite from Icona Solutions.
News from Icona Solutions (24 March 2006)
Silicone compounds are certified food-safe
Silicone tubing, seals, gaskets and profile extrusions are available in a number of compounds which have been certified by NSF International to NSF/ANSI Standard 51.
News from Vanguard Products Corporation (24 March 2006)
Show features optoelectronic sensor workshop
The UK Optoelectronic Chemical Sensing Network is to hold a free workshop on Thursday 7th September as part of the Instrumentation Scotland and Offshore exhibition.
News from Trident Exhibitions (24 March 2006)
President praises science club initiative
Lord Alec Broers, President of The Royal Academy of Engineering, has responded to this week's UK budget statement from the Chancellor of the Exchequer.
News from Royal Academy of Engineering (24 March 2006)
Six-axis robot adds an extra dimension
Kuka Robotics has been selected by CMH Manufacturing of Lubbock, Texas to provide a seven-axis robot for aluminium ladling applications.
News from Kuka Robotics (24 March 2006)
Distributor takes sensors to the Far East
American Sensor Technologies and Macro Sensors have appointed OptoCom Equiptech to distribute their full lines of sensing products throughout Singapore and Malaysia.
News from American Sensor Technologies (24 March 2006)
Online learning boosts design efficiency
ProEUniversity.com now provides Pro/Engineer users with free access to comprehensive engineering resources.
News from TriStar (24 March 2006)
Gas spring locks safely into place
The rigid locking Bloc-O-Lift gas spring is ideally suited for medical applications such as recline and vertical height adjustment of hospital beds, wheelchairs and stretchers.
News from Stabilus (24 March 2006)
Website tells all on nondestructive testing
The NDT Inspection and Testing website now provides a comprehensive insight into the company and its activities.
News from NDT Inspection and Testing (24 March 2006)
IR welding technique raises quality and cuts waste
User Application Article Special-purpose infra-red emitters improve the quality of an inspection chamber assembly production process while eliminating environmental problems. Brochure Available
News from Heraeus Noblelight (24 March 2006)
Metallic bellows perform well under pressure
Cold-rolled, thin-walled, convoluted expansion joints are engineered and manufactured to operate under very extreme temperatures and pressure conditions.
News from WahlcoMetroflex (24 March 2006)
Camera copes with a variety of industrial tasks
The MultiBlue CCD camera is a multipurpose imaging camera for a wide variety of industrial applications such as semiconductor and pharmaceutical inspection.
News from Perkinelmer Optoelectronics (24 March 2006)
Ratchet wrench increases speed and safety
A new half-inch ratchet wrench has the capability to dramatically increase the speed and safety of all conventional ratchets and tool sets.
News from Link Tools (24 March 2006)
Seals cope with low vapour pressure margins
The QBQ LZ provides high-reliability sealing with low emissions, claiming a new standard in high-reliability sealing for pumps in light hydrocarbon service at low vapour pressure margins.
News from Flowserve (24 March 2006)
First aid training at Safety and Health Expo
The British Red Cross will be at stand N70 at the safety and health expo in Birmingham on the 9-11 May 2006 to promote its first aid training courses.
News from British Red Cross (24 March 2006)
Audit and plan cut turnaround to 20 days
User Application Article Planned duration of the turnaround at production site at Barranquilla on the Caribbean coast has been reduced from 25 to 20 days with a stretched target of 19 days.
News from ABB Engineering Services (23 March 2006)
Keypad maker cuts static problems
User Application Article Producer of membrane keypads for the printed graphics industry has invested in static control technologies to reduce dust attraction and electrostatic discharge within its factory. Brochure Available
News from Meech International (23 March 2006)
Height gauge halves inspection times
User Application Article Californian gear company replaces large CMM for dimensional measurements with motorised, programmable height measuring systems for gauge laboratory and production measurement use.
News from Mahr Federal (23 March 2006)
Solar panel extends access control battery life
Solar panel extends battery life on access control product from 150 days to two years.
News from EMX Industries (23 March 2006)
Additives improve food-grade lubricants
Additives for use in lubricants produced for the food processing machinery market are composed of concentrated dispersions of boron nitride in synthetic fluid carriers.
News from Acheson Colloids (23 March 2006)
Software allows earlier automation in development
Design environment for composite products provides specialised tools that let engineers working in commercial CAD systems automate design processes earlier in product development.
News from Vistagy (23 March 2006)
Batch control helps at Irish pharmaceutical plant
Active pharmaceutical ingredient plant designed to be multipurpose, allowing a large number of products to be manufactured, necessitated the use of a comprehensive batch control system,
News from Yokogawa UK (23 March 2006)
Online service boosts motion control sales
User Application Article Online catalogue helps US firm increase sales of motion control system tenfold by showing potential customers how the product will work in their designs.
News from SolidWorks Corporation (23 March 2006)
Workstation meets harsh environmental needs
Industrial grade workstation with a 38cm TFT LCD supports full-size CPU cards and eight-slot PCI/ISA backplanes.
News from Axiomtek (23 March 2006)
3D software aid knitting machine design
User Application Article Manufacturer of circular knitting machines selects software for the virtual creation of a circular knitting machine to let the company visualise the process from design to manufacturing, in 3D.
News from IBM Product Lifecycle Management Solutions (23 March 2006)
Magnet-driven pumps set for Frankfurt launch
Magnet-driven versions of Atex approved pumps are being introduced at Achema in Frankfurt, from 15th to 19th May.
News from Tuthill Pump Group (23 March 2006)
Liquor store keeps pump running longer
Liquor held in pump chamber even after the inlet pipe-work has been emptied provides cooling to the rotating parts and lets pump run without liquor on the inlet for prolonged periods.
News from Chem Resist Group (23 March 2006)
Stainless steel keeps motors hygienic
For industries that make heavy demands on hygienic, easy-to-clean designs, motor and gearbox packages are free from potential contamination hazards, such as flaking paint and rusty surfaces.
News from Marlin Stainless (23 March 2006)
Vision sensor directly accepts encoder signals
Machine vision sensor uses patterns to detect and inspect parts, and directly accepts encoder signals, eliminating the need for a PLC when tracking and rejecting parts on variable-speed lines.
News from Cognex UK (23 March 2006)
Power and free conveyor chains transport materials
Power and free conveyor chains for production or assembly lines, in warehouses, in material flow systems, or wherever products need to be moved, stored, accelerated or separated along defined routes.
News from Iwis-Flexon (23 March 2006)
Chillers have free cooling option
Chillers with free cooling option in capacities from 43 to 1400kW; the free cooler is supplied as integral, packaged monobloc unit, containing a traditional cooling circuit and a free cooling section.
News from Powermaster Products (23 March 2006)
Marketing Administrator appointed at spring maker
Manufacturer of springs appoints Paul Meech as Marketing Administrator across its automotive and industrial divisions.
News from Lesjofors (23 March 2006)
Joystick order for industrial robot controllers
User Application Article Joysticks for industrial robot controllers used for machine loading and unloading, positioning of work pieces, pouring of aluminium and press-to-press transfer of metal sheets. Brochure Available
News from Penny + Giles (23 March 2006)
Design guide for spacers and tubular products
Design guide covers range of engineered spacers and tubular products and provides information on engineering design service for customised products. Brochure Available
News from Spirol Industries (23 March 2006)
Ethernet switch for up to five managed ports
Five-port Ethernet managed switch has full industrial ratings, including a wide operating temperature range, zone two hazardous locations, marine and offshore approvals. Brochure Available
News from Sixnet (23 March 2006)
Range extended with larger clutch
Larger clutch covers the torque range from 120 to 1200Nm on the ratcheting multi-position auto reset model and to 1500Nm on the single position synchronous auto reset type.
News from Mayr Transmissions (23 March 2006)
CAM keeps Space Shuttle flying
User Application Article Manufacturer of parts for the Space Shuttle uses CAM software to deal with the time pressure from large projects. Brochure Available
News from Delcam (23 March 2006)
Patent database contract extended
Contract to provide a value-added international patent database and unlimited access to the patents information service both in-house and via online hosts.
News from Thomson Scientific (23 March 2006)
Clutches let road ramp generate electricity
User Application Article Technical support from clutch firm helps inventor with idea for a road ramp that generates free electricity as cars pass over it.
News from Renold Clutches and Couplings (23 March 2006)
Remote communications added to data recorders
Reusable electronic event data recorders improved to let users remotely communicate with and monitor the status of the recording device. Brochure Available
News from Lamerholm Electronics (23 March 2006)
Change management gives water firm confidence
User Application Article Spanish water supply company implements change management system to improve efficiency and asset and software traceability, and give it more confidence in its complex software infrastructure. Brochure Available
News from Rockwell Automation Anorad (23 March 2006)
Pumps handle Atex conditions
Rotary lobe pumps provides different levels of seal monitoring to suit the application.
News from SSP Pumps (23 March 2006)
Web events offer opportunity to discuss research
The ARC WebForum Series is a webcast schedule of educational, online sessions which highlight recent ARC research findings in the manufacturing and supply chain industries.
News from ARC Advisory Group (23 March 2006)
Family owned business going strong at 70
UK pressed metal parts specialist Ladbrook Engineering will be celebrating its 70th year as a leader in the field of pressed metal engineering this year.
News from Ladbrook Engineering (23 March 2006)
Adapters accelerate PC CFD performance
CD Adapco's Star-CD application now supports InfiniPath InfiniBand adapters for HTX and PCI Express.
News from PathScale (23 March 2006)
Gas detector adds CO2 option
The V!SA is a low-cost, lightweight, accurate and robust gas detector providing peace of mind in safety critical applications, now with the additional advantage of infra-red CO2 detection.
News from Gas Measurement Instruments (23 March 2006)
Friction hinges offer new design options
Friction hinges have been traditionally used in the computer industry, but there are new and other markets where friction hinges could be used to replace gas springs or regular frictionless hinges.
News from Hanaya (23 March 2006)
Magazine previews ISA Ireland exhibition
The current issue of Read-out highlights the ISA Ireland table-top exhibition scheduled for 25th April 2006.
News from Read-Out Publications (23 March 2006)
Events answer electrical engineering challenges
A series of technology days around the UK promises to explain all you need to know about some of the more challenging aspects of electrical engineering.
News from ABB Automation Tech (LV Products) (23 March 2006)
Technical role for Kukula
Crowcon Detection Instruments has appointed Stefan Kukula as its new Technical Director. Brochure Available
News from Crowcon Detection Instruments (23 March 2006)
Pump station promises safe unloading
A new mobile pump station is designed for the safe unloading of IBC containers containing chemicals.
News from CDR Pumps (UK) (23 March 2006)
Renault F1 car illustrates composite design
A Renault F1 Team racing car will be the highlight of the Vistagy booth (C21) at the JEC Composites Show in Paris, France.
News from Vistagy (23 March 2006)
Sensor pioneer expands management team
DeepStream Technologies has expanded its management team with the appointment of Jonathan Luke as Vice President of Engineering and David Hall as Business Development Manager, Switchgear.
News from DeepStream Technologies (23 March 2006)
Slides and actuators keep costs down
New slides and actuators from Gimatic maintain low prices in contrast to competing devices.
News from Gimatic UK (23 March 2006)
Awards double comes in less than a year
Less than a year after launching the Bionic Wrench, LoggerHead Tools has received the highest possible honours in two international product design competitions.
News from LoggerHead Tools (23 March 2006)
Bevel gearboxes promise high efficiency
Redex-Andantex has a full range of cubic style, cast iron housing bevel gearboxes.
News from Andantex (23 March 2006)
Stefan Kukula is new Technical Director at Crowcon
Crowcon Detection Instruments has appointed Stefan Kukula as its new Technical Director. Brochure Available
News from Crowcon Detection Instruments (23 March 2006)
The dangers of playing on powered rolling doors
The Health and Safety Executive has issued an information document to the owners of vertically opening powered rolling doors following a number of serious and fatal accidents.
News from Health and Safety Executive (23 March 2006)
High-precision, nuisance-free circuit protection
Exhibition visitors from engineering disciplines looking for high precision, nuisance free circuit protection will find products to meet their needs at the Rowe Hankins stand at Electrex.
News from Rowe Hankins Components (23 March 2006)
Standard updated - BS 6007:2006 Electric cables
Building space is only safe for people to live and work in if the internal electrical wiring and cabling comply with industry standards.
News from BSI British Standards (23 March 2006)
Converting rotary torque into linear motion
Planetary roller screw, consisting of a roller screw (spindle) and a roller nut, converts rotary torque into linear motion, in a similar manner as acme screws or ball screws. Brochure Available
News from Power Jacks (22 March 2006)
Alliance aids product development
Organisations share technology and engineering expertise to build applications that will help engineers make more accurate, informed decisions early in product development.
News from Vistagy (22 March 2006)
OPC capabilities provide equipment continuity
User Application Article Standards-based software communications protocol provides common data exchange method between industrial devices and applications. Brochure Available
News from MatrikonOPC (22 March 2006)
All in one for vision sensors
Vision sensors combine vision inspection and analysis tools into one self-contained housing making it easy to inspect for multiple features.
News from Banner Engineering (22 March 2006)
Process pump works round the clock
Process pump has 0.25kW PWM brushless motor drive, roller and ball bearing construction and a non-chip epoxy-coated IP55 washdown steel enclosure, making it suitable for 24-hour continuous duty.
News from Barnant (22 March 2006)
Pump disposes of water purification tablets
User Application Article More than 15 million out-of-date water purification tablets, including blister packaging, that were stored during the Cold War in case of nuclear attack have been reduced to a pulp by a cutter pump.
News from Landia (22 March 2006)
UV curable polymer can be removed by most solvents
One component, flexible, ultraviolet-curable polymer system for bonding, sealing and coating can be removed by most conventional solvents and does not contain any solvents or other volatiles. Brochure Available
News from Master Bond (22 March 2006)
Note covers accuracy with draw wire transducers
Engineers can learn to produce data that is as accurate as possible with application note discussing accuracy and precision for draw wire transducers, covering the ways error can affect sensor data.
News from SpaceAge Control (22 March 2006)
Two heads in one corona treating unit
Corona treating unit is a lightweight machine that makes it possible to connect two treating heads to the same generator, and control them separately.
News from Dyne Technology (22 March 2006)
Auxiliary power unit delivers 55kW
Auxiliary power system is available for all major truck transmissions, and suits pulling, pushing or lifting applications, such as tippers, skip loaders, tankers, cranes and fire appliances. Brochure Available
News from Parker Hannifin (22 March 2006)
Ethernet to fibre conversion in harsh environments
Media converter range for industrial Ethernet to fibre conversion consists of entry-level 10/100baseT(X) to 100baseFX and 10baseT to 10baseFL media converters for harsh industrial environments.
News from Moxa Technologies (22 March 2006)
CD sampler lands inventor with two awards
Female Inventor of the Year award won by Morag Hutcheon, whose CD sampler also landed her the Product Development of the Year award.
News from CDC (CNC Design Consultants) (22 March 2006)
Worldwide effort aids coal gasification in China
User Application Article Chinese project called for control of high impact pneumatic cylinders within one of the most advanced coal gasification plants in the world. Brochure Available
News from Parker Hannifin (22 March 2006)
High torque to size ratio for direct drive motors
Direct drive torque motors have a high torque to size ratio, eliminating the need for gear reducers, and are designed to be an integral part of a machine.
News from Micromech (22 March 2006)
Piston accumulators with volumes up to 76 litre
Piston accumulators available as 125 and 200mm diameter units for use in industrial and mobile applications, such as suspension systems and pressure maintenance circuits. Brochure Available
News from Parker Hannifin (22 March 2006)
Monitors keep check on trihalomethanes
User Application Article Dissolved organics monitors help Yorkshire Water safeguard the health of its customers by preventing the formation of regulated compounds known as trihalomethanes.
News from ABB Automation Tech (Instrumentation + Automation) (22 March 2006)
DRO to make public debut at Mach 2006
Mach 2006 from 15th to 19th May at Birmingham's NEC to launch DRO that competes with PC-based systems in terms of cost and capability but without the associated training and support.
News from ACI (UK) (22 March 2006)
Linescan camera triples responsivity
Linescan sensor technology delivers throughput rates of 80MHz for programmable camera that uses Gigabit Ethernet network interface for control and data streaming Brochure Available
News from Firstsight Vision (22 March 2006)
Housing protects USB2.0 cameras
USB2.0 cameras for medical and industrial applications are available with IP67 compliant housing for use in harsh environments. Brochure Available
News from Firstsight Vision (22 March 2006)
Seminars provide opportunity to learn from experts
To promote manufacturing efficiency improvement, two seminars see leaders of change from within industry share their experience of implementing successful improvement programmes.
News from ABB Engineering Services (22 March 2006)
How to extend life of assets
User Application Article Independent expert review of the technical options and associated costs helped international offshore operator discover the basis for forward planning and budgeting.
News from ABB Engineering Services (22 March 2006)
Springs from stock or to order
Spring maker can supply standard products from stock or manufacture to customers' specifications.
News from Springmasters (22 March 2006)
Polymer control software boosts polycarbonate line
Polycarbonate manufacturer selects model predictive control polymer control software for a second polycarbonate line at manufacturing facility in Cartagena, Spain.
News from Pavilion Technologies (22 March 2006)
Thermal and visual camera built side by side
Infra-red radiometric camera is built into a rugged, compact and durable magnalium casing, based around an uncooled array and integrating multiple technologies.
News from Armstrong Optical (22 March 2006)
Nominations open for acoustics promotion award
Nominations invited for institute's second annual award for promoting acoustics to the public. Brochure Available
News from Institute of Acoustics (22 March 2006)
Pump ups performance and reduces running costs
Air driven double diaphragm pump is constructed with three solid housing parts in either PTFE for chemical resistance or UHDPE for use with abrasive products.
News from Chem Resist Group (22 March 2006)
Flange adapters won't pull out
User Application Article A contractor in Hungary turned to Viking Johnson's UltraGrip flange adapters to eliminate the risk of connections being pulled apart by sudden surges.
News from Viking Johnson (22 March 2006)
Materials perform inside job at auto exhibition
Poron urethanes, Bisco silicone cellular products and Durel electroluminescent lamps and drivers will be featured at this year's Auto Interiors Show.
News from Rogers Corp (22 March 2006)
Computer applications for the global community
Technical Background Article In the 21st century metal processing industries must work more intelligently if they are to survive and to grow, says Jim Marder PhD, ASM Technical Director.
News from ASM International (22 March 2006)
Standards specify oilfield corrosion protection
New standards on thermal spraying fills a void in zinc and tin alloy industry.
News from ASTM International (22 March 2006)
New from Extech Instruments is the 500 Series of industrial multimeters.
News from Extech Instruments (22 March 2006)
Rugged multimeters are waterproof to IP67
The 500 Series of industrial multimeters is ruggedly designed and waterproof to IP67 standards, making the instruments ideal for use outdoors, on boats and in any harsh industrial environment.
News from Extech Instruments (22 March 2006)
Safety tester has advanced memory
Electrical safety tester has advanced memory capability for applications where fully traceable testing records or professionally printed test labels are desired. Brochure Available
News from Clare Instruments (22 March 2006)
Guide screw key for packaging upgrade
User Application Article Rapid guide screw helps maker of high-quality container handling and packaging equipment increase flexibility of shrink bundlers.
News from Kerk Motion Products (21 March 2006)
USB cameras need no extra frame grabber hardware
USB 2.0 cameras for medical and industrial applications available with a range of monochrome and colour CMOS or CCD sensors in different resolutions, with global and rolling shutter.
News from Adept Electronic Solutions (21 March 2006)
Magnetic clamping plates provide flexibility
Magnetic clamping system that uses a square pole electro-permanent magnet is a work holding device for rough or fine cutting applications on milling machines and machining centres. Brochure Available
News from Schunk Intec (21 March 2006)
Gear units survive rigours of wind farm
Routine maintenance revealed wear on only two of the gear units at wind farm near Halifax, where 23 units have just completed 108,000 hours of service.
News from Siemens Flender (21 March 2006)
Cambridge firm certified on surface treatment work
ISO 9001:2000 certification achieved for applying advanced surface treatments using plasma electrolytic oxidation, as well as for the supply of processing plant, equipment and electrolyte products.
News from Keronite (21 March 2006)
Recycling plant attracted by magnetic separation
User Application Article Magnetic separation system facilitates the separation of cans from plastic bottle waste at recycling plant in Skegness, Lincolnshire. Brochure Available
News from Eriez Magnetics Europe (21 March 2006)
Adaptive machining flies high at air show
Adaptive machining products for aerospace to be shown at Farnborough Air Show using combination of expertise in software for machining and inspection and hardware-independent inspection software. Brochure Available
News from Delcam (21 March 2006)
Folding handle save space for enclosures
Ergonomic handle folds down to a height of 13.3mm for internal threaded version and 7mm for external threaded version to provide more clearance in crowded environments.
News from Southco (21 March 2006)
Scrap-free method leads to washer price cut
Manufacturing technique in Taiwan cuts scrap to zero when making washers allowing cost savings that are being passed to customers.
News from Disc-Lock Europe (21 March 2006)
Plastic pumps resist aggressive liquids
Vertical centrifugal chemical pumps made from plastics to increase resistance to aggressive liquids suit dry and submersible arrangements for conveying aggressive, corrosive or solid laden liquids.
News from AxFlow (21 March 2006)
Desiccant protection built into polymer walls
Desiccant polymer combines advantages of traditional polymers - such as rigid protection and ergonomic design - with the benefits of advanced moisture protection. Brochure Available
News from Brownell (21 March 2006)
Automatic batching units head for Qatar
Polymer preparation and dosing systems for use at a sewage works in Qatar have been designed to work in ambient temperatures of 50C and at high relative humidity.
News from ProMinent Fluid Controls (UK) (21 March 2006)
MoD uses meter to check for flaws and cracks
Radiometer and photometer chosen by Ministry of Defence for calibration of light sources used for flaw and crack detection.
News from Applied Scintillation Technologies (21 March 2006)
Adhesives cure in seconds on exposure to UV light
Ultraviolet-curable adhesives for glass bonding cure in seconds on exposure to UV light, creating a high strength, invisible bond and a stylish, contemporary finish with no screws and fixings.
News from Permabond (21 March 2006)
Waterjet intensifiers flow into Mach 2006
Waterjet intensifiers on show at Mach 2006 from 15th to 19th May at Birmingham's NEC use hard seal end cap design that simplifies servicing.
News from KMT Waterjet Systems (21 March 2006)
Insulation cuts aircraft noise
Thermal and acoustic insulation system is a multilayer design that addresses unwanted airborne and structure-borne noise without adding excess weight.
News from MTI Leewood (21 March 2006)
Intelligent, universal drives use DSP control
Universal drives covering brushless, DC, linear and step motors from 25W (45V, 0.5A) to 640W (80V, 8A) embed motion control, drive and PLC functionalities in one frame unit of different sizes.
News from Technosoft (21 March 2006)
Progressive cavity pumps get make-over
Five progressive cavity pumps are suitable for use with low to highly viscous fluids, even with solids inclusion, providing capacities up to 85m3/h at pressures up to 6bar.
News from Netzsch Pumps (21 March 2006)
Circuit breakers switch motors rated at up to 32A
Motor protection circuit breakers are available in versions to switch motors rated at up to 32A, providing a basis for fuseless starting for most motors used in commercial and industrial applications.
News from Moeller Electric (21 March 2006)
Encoders benefit from optical technology
Optics technologies provide smart encoders with programmability, miniature sensor size, broad alignment tolerances, accuracy enhancement, optical index and many operating resolutions and speeds.
News from Inmoco (21 March 2006)
Conveyor belt fasteners rights for UK and Ireland
Conveyor belt fasteners for lacing systems, vulcanising presses and endless belts in mining, agriculture, food processing and heat belt transportation applications. Brochure Available
News from 4B Braime Elevator Components (21 March 2006)
Lock prototype completed in less than three days
User Application Article Direct metal laser-sintering machine produces prototype for US lock maker in time for major exhibition and conference.
News from EOS Electro Optical Systems (UK) (21 March 2006)
Cable contract connects Swedish wind farm
Contract to supply the power cables to offshore wind farm in Sweden will help generate enough electricity to power about 60,000 homes.
News from ABB Power Technologies (21 March 2006)
Hungary kicks off overseas exhibition tour
Independent single-source supplier of fasteners as well as special-purpose turned and cold-formed parts is set for Industria in Budapest from 16th to 19th May.
News from Northern Precision (21 March 2006)
Sales staff expanded at compressed air company
Compressed air firm appoints five more regional sales managers and a technical support assistant for its distribution, industrial and aftermarket sales teams.
News from CompAir UK (21 March 2006)
Emerson buys Bristol Babcock for $121 million
Emerson acquires Bristol Babcock for $121 million bringing measurement and control products, technologies and services for oil, gas, power, water and waste-water industries worldwide.
News from Emerson Process Management (21 March 2006)
Solver technology added to CFD software
Latest version of computational fluid dynamic package brings solver technology without compromising the software's advanced modelling and complex physics capabilities.
News from CD-adapco (21 March 2006)
Industrial computer handles harsh environments
Ruggedised industrial computer for use in harsh environments is available with up to a 1.4GHz Intel Pentium M processor and provides flexible I/O expansion.
News from Sealevel Systems (21 March 2006)
Actuator is passed fit for clean-room duties
The HPLA80 belt-driven linear actuator has undergone extensive testing to establish its suitability for use in clean rooms.
News from Parker Hannifin Electromechanical Automation (21 March 2006)
CD covers comprehensive instrument range
A comprehensive CD provides detailed product and applications knowledge at the click of a button. Brochure Available
News from Michell Instruments (21 March 2006)
Demos to demystify EMC and drives
Schaffner will be revealing the black art of EMC at the forthcoming Drives and Controls expo. Brochure Available
News from Schaffner (21 March 2006)
Networking connector goes on without tools
The Variosub RJ45 Quickon plug connector from Phoenix Contact is the world's first 8-pin Cat5e RJ45 plug connector that requires no tools to assemble. Brochure Available
News from Phoenix Contact (21 March 2006)
Software brings CMM into line with CAD data
User Application Article Co-ordinate measuring machine manufacturer ITP Group has just completed a successful installation at luxury car manufacturer Bentley Motors.
News from ITP (21 March 2006)
Connector clamps go both ways
JW Winco now offers metric two-way connector clamps.
News from Winco (21 March 2006)
Thermographic camera has top quality lenses
The VarioCAM thermographic camera uses a variety of high-quality germanium lenses that allow the capture of the most precise thermographic images.
News from InfraTec (21 March 2006)
Moving CFD into the design process
Fluent is to host a free rapid flow modelling workshop for the automotive industry on Friday 21st April 2006 at St John's Conference Centre, Plymouth, Michigan.
News from Fluent (21 March 2006)
Grease promises long-term lubrication
Molykote G-2003 high performance grease is designed for long-term lubrication on plastic/metal and plastic/plastic combinations in automotive applications.
News from Dow Corning (21 March 2006)
Top prizes for design developed on Catia V5
User Application Article Dassault Systemes' technology at the heart of innovative interactive consumer goods product from Quadro
News from Dassault Systemes (21 March 2006)
JLMD to be at Shipping 2006 conference
The JLMD team will be on Donjon-SMIT's booth (ndeg32) of the Shipping 2006 conference.
News from JLMD Ecologic Group (21 March 2006)
JLMD to present FOR at Oil Pollution conference
JLMD will present its FOR system (Fast Oil Recovery) to the 19th Oil Pollution conference, which will be held 8 and 9 May 2006 in London.
News from JLMD Ecologic Group (21 March 2006)
JLMD short-listed for Seatrade Award
JLMD Ecologic Group has been short listed to enter as a finalist in the 2006 Seatrade Award category "Protection of the Marine and Atmospheric Environment".
News from JLMD Ecologic Group (21 March 2006)
Troax partitioning creates offices for airbus UK
User Application Article Troax's modular partitioning systems have been used to create an extensive series of offices, workstation and storage areas at Airbus UK's wing production facility in Broughton, North Wales.
News from Troax UK (21 March 2006)
Safety and health network celebrates 10 years
The European Agency for Safety and Health at Work was set up by the European Union in 1996 to help meet the information needs in the field of occupational safety and health.
News from European Agency For Safety And Health At Work (21 March 2006)
Subcon seminar programme extended
Four free seminars added to programme for subcontract manufacturing services show at Birmingham's NEC from 16th to 18th May.
News from Subcon (20 March 2006)
Modelling history with modern tools
User Application Article CADCAM technology helps Italian model maker with small-scale designs where it needs accuracy in the details that only the right combination of craftsmanship and software can give. Brochure Available
News from Delcam (20 March 2006)
Analysing weld stress added to durability software
Durability analysis software for FE models includes mesh-insensitive structural stress method for fatigue evaluation of welded structures.
News from Safe Technology (20 March 2006)
Touchy-feely centre returns to plastics show
Design Resource Centre returns to plastics design and moulding show in Telford in September to let visitors look at, touch and feel a huge variety of plastics samples.
News from Emap Maclaren Polymer Group (20 March 2006)
Software adds context to raw PLC data
Automation software platform can discover PLC information, including configuration and tags, delivering more levels of developer productivity and efficiency. Brochure Available
News from GE Fanuc Intelligent Platforms UK (20 March 2006)
Greek deal for military and aerospace technologies
Agreement to co-operate in Greek domestic and export markets covers electronic warfare systems, unstaffed aerial vehicles, aerostructures and composite structure manufacturing.
News from BAE Systems (20 March 2006)
Die caster lets inventor Twist again
User Application Article Materials advice helps inventor bring method for controlling moisture and pest infestation to market.
News from Fielding Manufacturing (20 March 2006)
Tag manipulation in OPC-DA servers
Operation feature provides the ability to manipulate the raw OPC-DA tag value before it is used for alarming and notification.
News from Exele (20 March 2006)
Adjustable thrust for linear actuators
Linear actuators convert rotary motion to linear travel and carry loads at speeds up to 180cm/s, depending on size, for positioning operations in all types of machinery. Brochure Available
News from Zero-Max (20 March 2006)
Super ring bring fast recovery for rail switch
Fast recovery time helps web-managed redundant Ethernet rail switch handle industrial applications.
News from Korenix Technology (20 March 2006)
Quick download due to Gigabit Ethernet interface
Gigabit Ethernet camera uses line scan sensor technology that achieves responsivity and throughput rates of 80MHz.
News from Adept Electronic Solutions (20 March 2006)
EDM - the key to better electrode making
Technical Background Article Smooth out the process, eliminate unnecessary steps, reduce errors and automate repeat work by using a single piece of software throughout electrode design and manufacture.
News from Cimatron UK (20 March 2006)
Midlands firm buys gear and component maker
Aerospace and motor sport component supplier experiences further growth this year with the acquisition of its third business in 12 months.
News from CommaTech (Leicester) (20 March 2006)
Less leakage from chemical pumps
Pumps from 0.75 to 3.75kW for process industries can handle chemical and other low pH process fluids without the mechanical seals of typical centrifugal pumps, so reducing leakage.
News from AxFlow (20 March 2006)
Tester checks child-proof packages
Child-resistant closure tester can simultaneously measure the downward force and the release torque applied to a closure. Brochure Available
News from Mecmesin (20 March 2006)
Portable endoscope for tight spaces
With a focus from 40mm to infinity and flexible probe, endoscope can image small points of interest inside engines, air conditioners, pipes, exhaust openings, storage tanks and under floorboards.
News from Moritex Europe (20 March 2006)
Software integrated at LNG terminal project
Terminal operations management system for LNG receiving terminal integrates software to support supervision and management with scalability to accommodate additional terminals.
News from Invensys (20 March 2006)
Steel tester doubles capacity
Electromechanical universal testing machine for the steel industry doubles capacity from 600 to 1200kN and can carry out tensile, compression and bend tests on steel specimens and components. Brochure Available
News from Zwick Testing Machines (20 March 2006)
Compressor supplier awards manufacturer
Compressor maker awarded Silver Supplier status by national compressed air specialist for offering on-going marketing, support and training.
News from Gast Group - Jun-Air (20 March 2006)
May conference for plant managers
Worldwide user conference in the Netherlands will provide a forum to share insight and exchange best practices on enhancing operational performance to meet business objectives.
News from Pavilion Technologies (20 March 2006)
Pneumatic plan saves money for snack maker
User Application Article Snack food manufacturing plant, producing some 175 million products a year, reduces energy costs by optimising the air consumption of its pneumatic automation. Brochure Available
News from Festo (20 March 2006)
Synchronous belts suit high torque drives
Synchronous belts for high torque drives that operate in a small space can also deliver cost savings in existing applications because smaller power transmission components can be specified. Brochure Available
News from Eriks UK (20 March 2006)
Proportional valve comes in four versions
Self-contained, electro-pneumatic proportional valve with an integrated control loop that provides precise regulation of pressure is for operation on normal filtered air.
News from Asco Numatics (20 March 2006)
Elastomers suit nuclear sealing applications
Two ranges of elastomers for use with ionising radiation are backed with evaluation results from independent test houses and individual customers in the nuclear sector. Brochure Available
News from James Walker and Co (20 March 2006)
Specifications added to slide guide range
Although similar types were available beforehand, now the user can also select wide and short block along with tapped holes in slide guide range.
News from Misumi (20 March 2006)
Toolkit improves materials and process education
Teaching toolkit for materials and process education in engineering supports introductory materials courses and has improved graphical visualisation features.
News from Granta Design (20 March 2006)
Car plant benefits from intelligent robots
User Application Article Three robots with intelligent control and integrated 3D laser vision systems help build cars at modern floor pan assembly line in Sunderland, the first of its kind in Europe. Brochure Available
News from Fanuc Robotics (UK) (20 March 2006)
Website is top for placements
A magazine survey names JobsGroup.net as the number one site for placements for the third year running.
News from JobsGroup.net (20 March 2006)
Sound level meters answer safety demands
Cirrus Research will be exhibiting an extensive range of products at the Safety and Health Expo in Birmingham.
News from Cirrus Research (20 March 2006)
User conference set for record turnout
A record number of existing clients and prospects are expected to attend the 2006 Micro Concepts user conference.
News from Micro Concepts (20 March 2006)
Sales and profitability up at Citect
Citect Corporation has reported results for the second half-year to the 31st of December 2005 and the full 2005 fiscal-year. Brochure Available
News from Citect (20 March 2006)
Solvent show to visit Barnsley
The EnSolv Roadshow visits Barnsley on 17th May 2006. Brochure Available
News from Enviro Tech Europe (20 March 2006)
Rings and corners are economical to make
A patented adhesive formulation is used to produce produce economical joined rings and corner gaskets.
News from MTI Leewood (20 March 2006)
Maths software is readers' choice
The readers of Desktop Engineering (DE) magazine have selected Mathcad 13 as their 2005 product of the year.
News from Mathsoft (20 March 2006)
Alliance aims to improve con-rod design
Corus is working closely with Smethwick Drop Forge to help optimise the design and manufacture of automotive con rods. Brochure Available
News from Corus Automotive (20 March 2006)
Regional show realises quick result
One exhibitor at this year's Southern Manufacturing and Electronics Show received its first sales lead before it even finished putting up its stand.
News from European Trade and Exhibition Services (20 March 2006)
CAM software gains important improvements
TopSolid'Cam 2006 includes important improvements for production machining - especially for the mould making and aeronautical sectors.
News from Missler Software (20 March 2006)
Modular approach aids lean adoption
User Application Article Adopting lean manufacturing techniques supported by modular handling and storage equipment is helping Scotsman Beverage Systems to reduce product lead times from six to two weeks.
News from Tube and Bracket Company (20 March 2006)
Hoses help make pipework more flexible
A range of ABS spigot-ended flexible hoses meets the needs of both the building services and industrial markets.
News from Durapipe UK (20 March 2006)
Package deal brings PLM to consumer sector
Styled Plastic and Packaging is an integrated package designed to help consumer goods businesses to launch more new products, in less time.
News from IBM Product Lifecycle Management Solutions (20 March 2006)
Flush-head studs bring thin sheets together
Type FHP self-clinching flush-head studs for thin stainless sheets are ideal where demanding requirements for corrosion resistance and thinner, lighter designs must be satisfied.
News from PennEngineering (20 March 2006)
Process instrumentation expands into Scotland
Gary Marsden, based in Falkirk, has been appointed as the new Roxspur M and C Scottish Area Sales Manager, and will be well known to many working in instrumentation in Scotland.
News from Roxspur Measurement and Control (20 March 2006)
Focus and pan stage aids thermal imaging
OptoTherm has added a focus and pan stage to its inventory of camera accessories available for purchase.
News from OptoTherm (20 March 2006)
UK manufacturers can help beat the drought
Envirowise is calling on UK manufacturers to take six key steps to prevent unnecessary water waste at work - ahead of possible water shortages this summer.
News from Envirowise (20 March 2006)
Latest CAM software set for MACH outing
Camtek will preview major new product developments at the MACH 2006 machine tool exhibition at the NEC in Birmingham, UK during May.
News from Camtek (20 March 2006)
Taster day addresses gender imbalance
Work-based training specialist Alliance Learning is inspiring teenage girls to consider a career in the traditionally male dominated world of engineering.
News from Alliance Learning (20 March 2006)
Search engine brings plastics data together
IDES has launched a vertical search engine for the plastics industry.
News from IDES (20 March 2006)
Roder takes charge of US operation
W Troy Roder has been appointed President and Chief Executive Officer of Foster Wheeler USA Corporation, part of the Global Engineering and Construction (E and C) Group.
News from Foster Wheeler (20 March 2006)
Sockets simplify safety relay installation
New sockets for force guided relay modules feature LED indicators that illuminate when power is applied.
News from Omron Scientific Technologies (20 March 2006)
Long life for laser-based particle counters
Long-term data demonstrates industry-leading laser life in particle counters, significantly reducing cost of ownership.
News from Particle Measuring Systems (20 March 2006)
Analyser is smart approach to noise and vibration
Equipped with a 24bit four-channel USB powered dynamic acquisition module, the SO Analyzer is billed as the perfect engineering tool for portable noise and vibration applications.
News from M+P International (20 March 2006)
Promotion for VanderWert
Prima North America has promoted Terry VanderWert to Senior Vice President and General Manager.
News from Prima North America (20 March 2006)
Industrial computer puts ARM9 in a box
The Matrix-500 is a lightweight but rock-solid 32bit programmable controller for unmanned industrial applications requiring 24/7 round-the-clock continuous operation.
News from Artila Electronics (20 March 2006)
Complex cable variants come together
Han Easy-Hood has been developed in response to the ongoing trend towards installations using different and complex cable variants in a single connector.
News from Harting (20 March 2006)
No action to be taken on Chancery Lane incident
The Health and Safety Executive's (HSE) HM Railway Inspectorate (HMRI) has published its web-based report into the Central Line train derailment at Chancery Lane tube station on 25 January 2003.
News from Health and Safety Executive (20 March 2006)
Total number of news releases published during the week: 226
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
