News releases on Engineeringtalk categorised by date
Sunday 12 November
to Saturday 18 November 2006
Website gives access to sensing products for rent
GE Industrial, Sensing a leading provider of precision sensing products, systems and services, announces a substantial extension to its fleet of rental equipment.
News from GE Sensing (17 November 2006)
Publishing software targets Itedo users
Trade up from Itedo to Seemage and receive 40% off the price of the Seemage system, including Seemage Publisher, Seemage Viz and Seemage MockUp.
News from Seemage (17 November 2006)
Hybrid linear actuator adds feedback
The Haydon size 11 hybrid linear actuator is now available with encoder feedback.
News from Servotechnic (17 November 2006)
Institution to expand publishing stable
The Institution of Engineering and Technology will unveil five new publications at the International Online Information exhibition in London.
News from Institution of Engineering and Technology (17 November 2006)
Pressure transducers avoid overspecification
Schaevitz brand pressure transducers handle the harshest environmental conditions and provide maximum resolution at the required measured pressure range.
News from Measurement Specialties (17 November 2006)
Ultrasonic sensors fit in smaller spaces
Ultrasonic measurement unit uses very small sensor (VSS) technology to fit into those applications where ultrasonic sensors could not previously be used because they were too large.
News from Cosense (17 November 2006)
Solid-state level sensors are more reliable
Ultrasonic liquid level switches are direct replacements for mechanical float type or electro-optic liquid level devices for high and low level alarm, pump protection, auto fill/auto empty operation.
News from Cosense (17 November 2006)
Autosport engineering advances on show
Renishaw will show technologies that allow motorsport companies to carry out high speed manufacturing and product development at the Autosport Engineering show. Brochure Available
News from Renishaw (17 November 2006)
Brazilian student wins materials design challenge
Granta Design has announced the winner of the Ashby Design Award for 2006.
News from Granta Design (17 November 2006)
Thai power plant to adopt digital architecture
Emerson Process Management has won a contract to install its PlantWeb digital plant architecture at the new Ratchaburi power plant in Thailand.
News from Emerson Process Management - Power + Water (17 November 2006)
Interface links materials with design
Matereality has developed an interface to seamlessly pipe material properties from Matereality into Moldflow's injection-moulding CAE software.
News from Matereality (17 November 2006)
Robot to make grinding and scotching safer
Kuka Robotics Corp has been selected by SHL Automation as the robotics supplier for its new grinding and scotching system.
News from Kuka Robotics (17 November 2006)
Rod and bar mills ordered for India
Morgan Construction Company has been awarded a contract to build two mills for Jindal South West (JSW) Steel, both to be located in Toranagallu, India.
News from Morgan Construction Company (17 November 2006)
Shaft seals keep VOC vapours at bay
Meco custom shaft seals are effective in containing VOC vapours from rotating reactor, dryer, extractor and conveyor driveshafts. Brochure Available
News from Meco Shaft Seals (17 November 2006)
Coating survives the daily grind on the treadmill
User Application Article Coating provides superior friction and wear properties in novel dual belt instrumented treadmill from Advanced Mechanical Technology.
News from Victrex USA (17 November 2006)
Wireless I/Os link with PLCs, HMIs and PCs
Cost and convenience are the two biggest advantages of going wireless over wired, and now B and B Electronics offers even more.
News from B and B Electronics Manufacturing Company (17 November 2006)
Incremental encoders are easy to customise
USB-connected incremental encoders empower customers to freely program the number of lines from 1 to 8192, as well as the width of the zero pulse.
News from Sick Stegmann (17 November 2006)
Business and technology park revealed
Advanced Design Consulting USA (ADC) plans to begin building the first phase of its new ADC Business and Technology Park on a 48-acre parcel in Dryden, New York.
News from Advanced Design Consulting (17 November 2006)
3D CAD downloads bring business benefits
User Application Article Catalog Data Solutions (CDS) has revealed the spectacular business results achieved by JW Winco using CDS's 3D CAD Download Solution.
News from Catalog Data Solutions (CDS) (17 November 2006)
3D simulator shows off complex control systems
Anark has launched an interactive three-dimensional (3D) application illustrating a complete civil aircraft flight control system.
News from Anark Corporation (17 November 2006)
Low-cost display has four five-digit channels
Inertial Aerosystems has a new low-cost multichannel display system, designed primarily for use in the processing industry. Brochure Available
News from Inertial Aerosystems UK (17 November 2006)
Thermal imagers provide maintenance options
Easy-to-use thermal imagers provide a choice of rugged, fully radiometric solutions for industrial maintenance engineers and for predictive maintenance (PdM) applications. Brochure Available
News from Fluke (UK) (17 November 2006)
Flow monitor boasts solid-state reliability
The new E-T-A FS30 electronic flow monitor incorporates a robust, membrane-type sensor which will monitor flow rates from 0.25 to 3m/s. Brochure Available
News from E-T-A Circuit Breakers (17 November 2006)
VSDs drive down HVAC costs
Variable speed drives provide straightforward, convenient and cost effective way of achieving substantial energy savings in heating, ventilating and air conditioning applications.
News from Schneider Electric (17 November 2006)
Gearmotors focus on greater precision
For applications where the least possible gear play is an important requirement, Zeitlauf is now offering its renowned Performax products in high-precision Focus versions.
News from Zeitlauf UK (17 November 2006)
Limit switches have all safety options covered
Carlo Gavazzi has introduced a comprehensive range of over 8000 limit switches to complement its existing portfolio of position and level sensors.
News from Carlo Gavazzi (17 November 2006)
Safety cable for Munich's underground railway
Datwyler Cables to supply Munich's underground railway company with safety cable for extensions to lines 3 and 6.
News from Datwyler (UK) (17 November 2006)
Pocket-sized safety information for Shell staff
User Application Article Kyp Systems to provide Shell Downstream with iKyp (information to Keep in your pocket) to reinforce safety lessons learnt during Safety Week and encourage their adoption in the workplace.
News from Kyp Systems (17 November 2006)
Multistage forming simulations
Technical Background Article What happens if your part is unlikely to be successfully formed in a single stage? What if you want to see what would happen if you tried to form it in a single process?
News from StampingSimulation.com (16 November 2006)
Compressor packages offer efficient control
Rand Equipment has introduced a new series of rotary screw compressor packages with capacities from 510 to 980 litre/min and a maximum working pressure of 10bar.
News from Rand Equipment (16 November 2006)
Installation tips for pressure transmitters
Technical Background Article Wayne Bishop offers guidance on installing pressure transmitters for optimal performance and longevity.
News from SensorsOne (16 November 2006)
Aussie instrument maker expands
Thanks to growing success, IDM Instruments has relocated to Hallam in Victoria to a much larger, and much needed production facility.
News from IDM Instruments (16 November 2006)
Investment enables expanded ball joint range
Inline spring retained ball joints are particularly suited to commercial plant manufacturers and industrial animation applications.
News from Illston and Robson (16 November 2006)
Displays improve control room data presentation
Hima-Sella is teaming up with eyevis of Germany, in order to enhance the provision of its latest technology.
News from Hima-Sella (16 November 2006)
Bradbury takes charge of service centre
Thorite has appointed Philip Bradbury to the position of Supervisor at the company's busy sales and service centre in Leeds.
News from Thorite (16 November 2006)
High temperature sealant makes the food grade
AS1502 from Intek Adhesives is a high temperature sealant for use up to 300C.
News from Intek Adhesives (16 November 2006)
Distance measurement has long range accuracy
Novel distance measurement device boasts an accuracy of +/-3mm over the full measuring distance of 200m. Brochure Available
News from Leuze Mayser (16 November 2006)
TIG torches are easy and comfortable to use
Compact TXH TIG torches are particularly suitable for applications where access is difficult, yet ergonomics and performance remain uncompromised. Brochure Available
News from ESAB (16 November 2006)
Charity donation replaces Christmas cards
Northern Precision has donated GBP 300 to the National Society for the Prevention of Cruelty to Children (NSPCC) in lieu of buying corporate Christmas cards.
News from Northern Precision (16 November 2006)
Plastics welder promises energy savings
CPR Automation has announced the introduction of the latest innovation in plastic joining technology.
News from CPR Automation (16 November 2006)
Schools take design and innovation challenge
The MTA's secondary schools competition, the Technology, Design and Innovation (TDi) Challenge, has been running since 2001.
News from Manufacturing Technologies Association (16 November 2006)
Sampling valve returns to safe position
The Strahman Quik sampling valve combines manual quarter-turn operation with spring return for precise sampling and operator safety.
News from Waters Equipment (16 November 2006)
System integrator focuses on robotic vision
Cognex Corp has entered into a system integrator (SI) agreement with Aylesbury Automation.
News from Cognex UK (16 November 2006)
Industrial Ethernet switch manages gigabit speeds
The ET-10MG offers eight 10/100Mbit/s RJ45 ports plus two 1Gbit/s combination ports for copper or fibre connections. Brochure Available
News from Sixnet (16 November 2006)
Sharp directs sales and marketing
Southern Vision Systems has recruited Bob Sharp as Director of Sales and Marketing.
News from Southern Vision Systems (16 November 2006)
Couplings enhance safety in engine test cells
User Application Article Staubli multi-couplings provide the secure, automatic, leak free connections operating at the heart of Perkins impressive new engine testing facilities at its Peterborough factory. Brochure Available
News from Staubli UK (Connectors) (16 November 2006)
Monomer is instrumental in glass replacement
A custom formulation of the thermoset monomer ADC (allyl diglycol carbonate) is rapidly growing as a replacement for glass in a number of instrument display window applications.
News from Fosta-Tek Optics (16 November 2006)
Preventative maintenance for electrical safety
Technical Background Article Jim Wallace, research and technology manager at Seaward Electronic, explains the importance of ensuring the safety of electrical equipment used in the workplace. Brochure Available
News from Seaward Electronic (16 November 2006)
Non-contact voltage detectors to improve safety
ChekVolt non-contact enclosure voltage portal reduces arc flash risks and increases electrical safety by providing a no-touch voltage portal on the outside of metallic electrical enclosures.
News from Grace Engineered Products (16 November 2006)
Incat takes enterprise simulation to the USA
MSC.Software has announced a global partnership with Incat, the world's leading independent provider of PLM services and solutions.
News from MSC.Software (15 November 2006)
Double coupling provides margin for pump drives
The pump industry makes special demands on the torsionally flexible shaft couplings between electric motor and pump.
News from KTR Couplings (15 November 2006)
3D laser camera goes through its paces at EuroMold
Creaform will show off its Handyscan 3D, the first self-positioning handheld 3D laser camera at the EuroMold exhibition in Frankfurt (29th November to 2nd December 2006).
News from Creaform (15 November 2006)
MEMS devices are put to the test
Dynamic characterisation of MEMS devices under operational conditions provides detailed information on the vibration mode shapes and deformations of the devices.
News from Armstrong Optical (15 November 2006)
Display module interrogates loggers in the field
A new easy-to-use battery-operated display module for the ACR SRP range of 12bit palm sized data loggers lets users view readings in real time.
News from JDL (Just Data Loggers) (15 November 2006)
Electric linear actuators configured online in 3D
Power Jacks continues to expand its online 3D CADalogue facility with the launch this month of the EMA range of electric linear actuators. Brochure Available
News from Power Jacks (15 November 2006)
Dynamic simulator speeds operator training
User Application Article Dow Corning is using a dynamic simulator, built and implemented by Invensys Process Systems, to train operators at its Barry, South Wales production facility.
News from Invensys SimSci Esscor (15 November 2006)
Chains last longer - with no price premium
Seventh generation ANSI standard chain employs an innovative bushing system that greatly improves internal lubrication and extends wear life by 100%. Brochure Available
News from Tsubakimoto UK (15 November 2006)
Imaging system isn't fooled by glass reflection
Imaging system is designed to monitor one-side coated flat glass and addresses a rapidly increasing need as low-E glass becomes more widely used in the construction industry.
News from Raytek Corp (15 November 2006)
PLM package makes sense of bills of materials
CoCreate Software has released version 14.50 of its integrated data management product, CoCreate OneSpace Model Manager 2006.
News from CoCreate Software (15 November 2006)
Test rig eases peel strength measurement
Lloyd Instruments has developed a special jig for easy determination of peel strength of the aluminium foil on contact lens blister packs.
News from Lloyd Instruments (15 November 2006)
Valve control transmitter feeds back continuously
Noncontact transmitter eliminates position blind spots during the stroke of a valve by supplying continuous feedback of either rotary or linear valve position.
News from Westlock Controls (15 November 2006)
Software speeds rolling ring drive specification
Software quickly analyses linear motion application requirements and assures selection of the correct size Uhing rolling ring drive.
News from Amacoil (15 November 2006)
Stacking beacons improved
New improved deegee stacking beacon range are ideal for status-warning.
News from DG Controls (15 November 2006)
CFSE process applications training course
Certified Functional Safety Expert (CFSE) process applications training course will be held from Monday 27 November to Thursday 30 November 2006 at exida offices
News from exida (15 November 2006)
Whimsical view of industrial Ethernet
The Profibus Group is offering a free booklet that takes a fresh look at industrial Ethernet and addresses some of the myths and facts about Profinet.
News from Profibus Group (14 November 2006)
Vendor approval opens oilfield opportunities
Agip KCO (Kazakhstan North Caspian Operating Company) has added Hima-Sella to its list of approved vendors, following a detailed assessment of the company.
News from Hima-Sella (14 November 2006)
Embedded device servers ease network communication
Entrix Computing has two new Connect ME device servers from Digi International.
News from Entrix Computing (14 November 2006)
Speciality resins aid product differentiation
User Application Article GE's Visualfx resins are formulated with special colours and effects inherent in the material.
News from Sabic Innovative Plastics (14 November 2006)
Acquisition kick-starts Asia-Pacific expansion
Nexans has signed an agreement to acquire the Australian company Olex, the uncontested cable industry leader in the Australasia region, for A$515 million.
News from Nexans (14 November 2006)
Engineering work placements pay dividends
Leicester based electrical firm Cressall Resistors is calling for more local firms to support engineering work placement and apprenticeship schemes such as the one run by De Montfort University.
News from Cressall Resistors (14 November 2006)
Encoder systems have all applications covered
Renishaw offers a wide range of magnetic and compact optical position feedback encoder systems to meet the diverse requirements of industrial automation. Brochure Available
News from Renishaw (14 November 2006)
Automotive components in focus
Conference on "Optimising automotive components for cost, weight and fatigue durability using residual strain and damage measurements to improve CAE models" is hailed as a success.
News from Engineering Integrity Society (14 November 2006)
Contracts confirm torpedo battery dominance
Saft has won major contracts for silver-zinc (Ag-Zn) torpedo batteries for the German, Norwegian and South Korean navies. Brochure Available
News from Saft Lithium Battery Division (14 November 2006)
Industrial PCs are rugged and powerful
Suitable for a wide range of "black-box" hidden PC applications, the Pro-Sys range is designed to deliver one of the industry's lowest price to performance ratios.
News from Wordsworth Technology (14 November 2006)
Misumi eyes European expansion
The Misumi Group is aiming at full-scale entry into the European FA market, the second largest in the world, through an integrated front-end/back-end approach.
News from Misumi (14 November 2006)
Direct geometry editing removes constraints
Kubotek Europe has released KeyCreator 6.0.2 for the European market, a new version of its widely used design and manufacturing software.
News from Radix Solutions (14 November 2006)
Torque transducers test tools and more
The TB and TL torque transducers are designed for tool-testing applications but can be used in other situations.
News from Industrial Measurements (14 November 2006)
Cost-effective option in torque measurement
The new TLT torque transducer from Industrial Measurements is not the most accurate, not the fastest and not the cheapest in the world, but it's great value.
News from Industrial Measurements (14 November 2006)
Amplifier works with hazardous area display
Sensor Techniques is introducing the DAS72-EX safe area amplifier, specifically designed for use with the versatile BEKA BA488C ATEX certified hazardous area digital weight display.
News from Sensor Techniques (14 November 2006)
Day is dedicated to innovation in the workplace
Tuesday 14th November 2006 is Ideas at Work Day.
News from Manufacturing Advisory Service - West Midlands (14 November 2006)
King is promoted to the Board
BAE Systems has announced the appointment of Ian King to the post of Chief Operating Officer responsible for all UK and Rest of the World business.
News from BAE Systems (14 November 2006)
Couplings are made for railway applications
User Application Article With the Rotex coupling the designers of train drives have a shaft coupling range that has been adjusted to the special requirement specifications of train technology.
News from KTR Couplings (14 November 2006)
Inks support novel laser marking technology
As part of its strategy to offer complete printing ink solutions, Sun Chemical has signed a licence agreement to sell DataLase inks.
News from DataLase (14 November 2006)
New name in the UK chain market
Chaintech UK has unveiled a new trading name and company identity. Brochure Available
News from Chaintec (14 November 2006)
Adjustable levers are made from stainless steel
An expanded line of inch and metric stainless steel adjustable levers is now available from JW Winco.
News from Winco (14 November 2006)
South African distributor commits to stock
AccelRate Power Systems has received an initial stocking order from its newly appointed South African distributor, Saficon Industrial Equipment, trading as Toyota Forklift.
News from AccelRate Power Systems (14 November 2006)
Bearings answer petrochemical demands
Bearings are specifically designed to provide solutions to the economic and environmental issues facing the chemical and petrochemical processing industry. Brochure Available
News from NSK UK (14 November 2006)
Aluminium coating meets military specifications
Iridite NCP is the first and so far the only chrome free conversion coating for aluminium to be approved and listed in the Qualified Products List for the MIL-DTL-5541F specification. Brochure Available
News from MacDermid (14 November 2006)
Dispensing system lays down larger volumes
Positive-displacement, two-component meter-mix dispensing system is designed to apply small precision beads and small metered shots of precisely mixed resins.
News from Sealant Equipment and Engineering (14 November 2006)
Linear progression
Technical Background Article Denis Eckstein of Hoerbiger-Origa plots the rise and rise of engineered linear motion. Brochure Available
News from Hoerbiger-Origa (14 November 2006)
Manufacturing show forecasts record attendance
The Southern Manufacturing Show returns to Thorpe Park on 7th and 8th February 2007 for the ninth consecutive year.
News from European Trade and Exhibition Services (14 November 2006)
Energy saving with standard motors
Technical Background Article Replacing standard motors with high efficiency types is fine, but how can I save energy with my existing installed motor base? Dave Hawley advises.
News from Deritend Group (14 November 2006)
Complete package is key to CAD/CAM success
Software specialist Radan Computational celebrated its 30th anniversary as a leading supplier of CAD/CAM solutions for the sheet metalworking sector during October. Brochure Available
News from Radan Computational (14 November 2006)
Young Woman Engineer shortlist announced
Following a record number of entries, and a rigorous round of interviews, the IET has announced the finalists for the 2006 Young Woman Engineer of the Year awards.
News from Institution of Engineering and Technology (14 November 2006)
Pressure calibrator claims new standard
Ametek Calibration Instruments is claiming a new standard for pressure calibration with the introduction of the high resolution, compact Jofra DPC-500 documenting pressure calibrator.
News from Ametek Calibration Instruments (14 November 2006)
Academy focuses motorsport engineering education
An innovative programme aims to help the motorsport industry recruit and develop staff with exactly the world-class skills and expertise it requires.
News from Motorsport Industry Association (14 November 2006)
Extra-long laser probe scans larger objects
Laser Design has developed a new 3D laser scanning probe with an extra long laser line and dual CMOS receptors.
News from Laser Design (14 November 2006)
Technology office expands in Seattle
Laser Design has expanded its Seattle technology office which is responsible for laser probe manufacturing, research and development, software engineering and worldwide customer support.
News from Laser Design (14 November 2006)
Bearing greases have all applications covered
The latest Dow Corning Molykote line of bearing greases enables customers to meet all their lubrication needs from a single source.
News from Greeff (14 November 2006)
Electronics complement turbine flowmeters
The Hoffer CAT Series of flow electronics, is a new compact design of flow conditioners, amplifiers and transmitters for use in combination with Hoffer turbine flowmeters.
News from Hoffer Flow Controls (14 November 2006)
Operator panel features 15in display
With the design of the Automation Panel 800, B and R continues to expand its successful Automation Panel series.
News from B and R Industrial Automation Corp (14 November 2006)
New brand unites clutches and brakes
Deltran, the Danaher Motion brand name most recognised for its genuine wrap spring and electromagnetic friction clutch/brake products, has been paired with Thomson.
News from Danaher Motion (14 November 2006)
Wizard helps with servo sizing process
ServoSoft models the simplest and most complex servo system designs, from motion profile and mechanical performance to power flow throughout the entire electrical and mechanical system.
News from ControlEng Corp (14 November 2006)
Heating system stakes metal to plastic
Induction Atmospheres has developed an induction heating system for heat staking metal components to plastic assemblies.
News from Induction Atmospheres (14 November 2006)
Check valve has no magnetic signature
A novel pilot-operated check valve suits applications in which magnetic interference is not acceptable.
News from NGT Specialty Valves (14 November 2006)
Peugeot Citroen to host first PLM workshop
A PLM Maturity Workshop in Paris, France is the first in a series of international events to be hosted by Founder Members of the PLM Maturity Reference Model (MRM) Project.
News from PLM Interest Group (PLMIG) (14 November 2006)
Hoist rings raise a host of options
Wide variety of hoist rings includes centre-pull style, side-pull style, pivoting lift rings, side-pull 2000 style and swivel eyebolts.
News from Ondrives/Rino Industries (14 November 2006)
Cordless tools combine power and durability
Cordless impact wrenches feature reverse torque levels of up to 500Nm and a durability three times longer than the competition.
News from Ingersoll-Rand European Sales (14 November 2006)
Survey highlights shortcomings in China sourcing
A recent study by Ricardo Strategic Consulting indicates that many Western automakers are failing to benefit fully from their low cost country sourcing efforts.
News from Ricardo (14 November 2006)
Current transducers take conditioning onboard
Noncontact current transducers help designers to convert high level current signals into simple 4-20mA or 0-10V DC process signals.
News from Red Lion Controls (14 November 2006)
Bearing condition monitor maximises uptime
A new brochure details the XTS-W bearing condition monitoring system - a proven system to maximise uptime and revenue. Brochure Available
News from AMOT (14 November 2006)
Connectors rethink the sealing principle
A radical new design of tube connector can deliver huge cost savings to builders of industrial equipment involving fluids. Brochure Available
News from Parker Hannifin Instrumentation Products Division (14 November 2006)
Discuss measurement applications at MTEC
Transducer specialist RDP Electronics will be showing the latest developments in sensor technology at MTEC 2007. Brochure Available
News from RDP Electronics (14 November 2006)
Software to advance French space effort
The Centre National d'Etudes Spatiales has selected a broad portfolio of MSC.Software to help the agency in its mission to invent the space systems of the future.
News from MSC.Software (14 November 2006)
Survey highlights importance of CADCAM support
In a recent survey of Delcam's UK customers, more than 70% of respondents replied that they would definitely recommend other companies to buy CADCAM systems from Delcam. Brochure Available
News from Delcam (14 November 2006)
Rotary position sensors handle harsh environments
Upgraded range of rotary position sensors allows OEMs to produce more accurate measurement equipment for the most demanding industrial and position sensing applications. Brochure Available
News from Penny + Giles (14 November 2006)
Data Matrix reader is almost half the price
A shift in manufacturing and distribution arrangements for the DataMouse Pro handheld Data Matrix reader has allowed Absolute Vision to slash its prices worldwide.
News from Absolute Vision (14 November 2006)
OEM software answers rail industry demands
ADT Rail Systems, part of Siemens Transportation Systems, has placed a significant order for software licences with Tascomp, developer of Prodigy Scada software.
News from Tascomp (14 November 2006)
Simulation allows savings on overdesigned products
User Application Article LeBaron Foundry is saving more than $500,000 on raw material costs annually because of design work performed in SolidWorks 3D CAD software and facilitated by Cosmos analysis software.
News from SolidWorks Corporation (14 November 2006)
SL material claims superior sidewall quality
DSM Somos has announced the commercialisation of NanoTool, the third generation of Somos ProtoComposite materials. Brochure Available
News from DSM Somos (14 November 2006)
Four new members for vision association
UKIVA is delighted to welcome four new members, whose activities in the field of imaging reflect the breadth of imaging applications throughout imaging and science.
News from UK Industrial Vision Association (14 November 2006)
PC-based controllers score with Keegan
User Application Article Beckhoff PC-based control products are providing all the major automation functions at the world's first interactive indoor football attraction.
News from Hayes Control Systems (14 November 2006)
High-pressure hoses handle rough treatmant
Parker Stratoflex 191 PTFE high-pressure hose offers four times the abrasion resistance of comparable polyester covered hoses.
News from Icore International (14 November 2006)
Paper explains merits of free CAD model downloads
A new free-to-download white paper details a new opportunity for manufacturers and distributors to drive revenue growth, lower costs and increase customer loyalty.
News from Catalog Data Solutions (CDS) (14 November 2006)
5.5 million people opt to ban bullying at work
Ban bullying at work day - most successful year ever.
News from The Andrea Adams Trust (14 November 2006)
Software makes product of the year shortlist
Proact Logic Tree Knowledge Base Templates is a finalist in Plant Engineering magazine's 2006 Product of the Year contest in the Maintenance Software category.
News from Reliability Center (13 November 2006)
Net earnings record is broken again
Foster Wheeler has announced third-quarter results for the period ended 29th September 2006.
News from Foster Wheeler (13 November 2006)
Monochrome camera is smart vision option
Smart camera offers monochrome VGA (640 x 480) resolution at frame rates of 60 frame/s.
News from Sony Europe - Image Sensing Solutions (13 November 2006)
3D CAD accelerates product development
User Application Article A three-wheeled vehicle designed in SolidWorks 3D CAD software will soon give off-road and on-road enthusiasts a faster, safer ride than they've ever had before.
News from SolidWorks Corporation (13 November 2006)
Link brings flammable effects into the reckoning
SimSci-Esscor's Visual Flow safety system design software links with DNV Software's PhastFX flammable effects software module.
News from Invensys SimSci Esscor (13 November 2006)
Monitoring software watches moulding process
The latest addition to the CoMo monitoring and analysis range, is a manufacturing information system designed to provide a quick, yet comprehensive overview of the injection process.
News from Kistler Instruments (13 November 2006)
Investment improves rail industry service
Recent investment at Midland-ACS will benefit many customers in the rail industry. Brochure Available
News from Midland ACS (13 November 2006)
Dynamic modelling garners design award for Oki
User Application Article Oki Printing Solutions developed its award-winning C3400n digital colour printer using CoCreate's 3D product development software, OneSpace Designer Modeling.
News from CoCreate Software (13 November 2006)
CAD library removes need to re-invent wheel
CADopia has added the ability for engineers to access and download millions of manufacturer specific CAD drawings from ThomasNet.com and directly insert them into their own designs.
News from CADopia (13 November 2006)
Vibration spectrum analysis runs on handheld PC
Datastick Systems introduces new-generation handheld vibration spectrum analysers for machine diagnostics and predictive maintenance - available in the UK from Lightwave Scientific.
News from Lightwave Scientific (13 November 2006)
Surge arrester handles larger loads
Two-pole modular surge arrester protects electronic equipment in industrial and commercial installations.
News from Dehn (UK) (13 November 2006)
Fashion event supports disadvantaged job seekers
Bishop-Wisecarver Corp supports Wardrobe for Opportunity, a nonprofit organisation that provides professional clothing and career support to low-income jobseekers.
News from Bishop-Wisecarver Corp (13 November 2006)
Profile system switches to stainless steel
Item has introduced a new 40x40 stainless-steel profile together with a range of stainless-steel fasteners and T-slot nuts to suit. Brochure Available
News from Machine Building Systems (13 November 2006)
Measurement resource expands on shortform
Endevco has published its new 2007 Catalogue and Measurement Resource.
News from Endevco (13 November 2006)
Essential items are guaranteed in stock
Endevco has added 23 more products to its Test Essential offerings under its industry-first guaranteed in-stock programme introduced in August of this year.
News from Endevco (13 November 2006)
Retargeting eliminates islands of automation
Inductive Automation has developed a retargeting feature, enabling an architectural hierarchy of servers for its web-launched Scada package, FactoryPMI.
News from Inductive Automation (13 November 2006)
Data conversion in focus at Aerospace Design Expo
CCE will be exhibit on Booth 5512 at the Aerospace Design Expo 2006 North America, from 14th to 16th November 2006 at the Anaheim Convention centre, California.
News from CCE (13 November 2006)
Brushless servos slip in to replace N Series
Higher performance brushless servomotors are designed to replace the now obsolete N-Series motors recently discontinued by Rockwell Automation/Allen-Bradley. Brochure Available
News from Parker Hannifin Electromechanical Automation (13 November 2006)
Fluoroelastomer boasts longer sour-gas service
FR25/90 fluoroelastomer has been rated with an exceptional service life of 142,000 years in a sour (H2S) gas and liquid hydrocarbon mixture. Brochure Available
News from James Walker and Co (13 November 2006)
Cadets on top in aerospace challenge
Senior aerospace industry officials congratulated winning cadets from 499 (Port Talbot) Squadron Air Cadet Group, in London last week for scooping a national award for innovation in military aviation.
News from BAE Systems (13 November 2006)
Contract covers naval hull vibration monitoring
BMT Defence Services has teamed with Drumgrange to win the Royal Navy HVME (TR) contract, valued at more than GBP 1 million.
News from BMT (13 November 2006)
Fastener websites play the name game
New domain names mean that screw thread insert users will find their way to WTI's website.
News from WTI Fasteners (13 November 2006)
High-speed video reveals machine flaws
User Application Article A high-speed camera hired from Ashtead Technology Rentals has provided a manufacturer of can-making equipment with hitherto unattainable access to machine performance information.
News from Ashtead Technology (13 November 2006)
Programming system supports more CAD packages
EdgeCAM V11.0's advanced handling of 3D models from a wide range of proprietary CAD systems provides faster operation and shorter programming times.
News from Pathtrace Engineering Systems (13 November 2006)
Contract cleans up on medical device manufacturing
Houghton has been awarded a contract from DePuy International for the metal cutting fluids at the company's Leeds production unit.
News from Houghton UK (13 November 2006)
Shaw to promote benefits of partnership
The Tees Valley Engineering Partnership has appointed North-East student Seline Shaw to the newly created role of Marketing Assistant.
News from Tees Valley Engineering Partnership (13 November 2006)
Sealing conference is timed for IPPC Directive
BHR Group's 19th International Conference on Fluid Sealing will be held in Poitiers, France, on 25th and 26th September 2007.
News from BHR Group (13 November 2006)
Seals survive tungsten carbide surfaces
Nonabrasive material optimises seal performance and gives exceptional integrity against tungsten carbide coated moving parts in primary flight controls and utility actuation systems.
News from Trelleborg Sealing Solutions UK (13 November 2006)
Far-UV mirrors promise consistent performance
Starna is one of the few vendors capable of supplying far-UV mirrors with proven performance.
News from Starna Scientific (13 November 2006)
Compression spring manufacturer invests in quality
Ashfield Springs has recently invested in the latest technology with the acquisition of a Bobbio 800 CNC machine.
News from Ashfield Springs (13 November 2006)
Compressors and airtools come together
Catalogue covers compressors, airtools, lighting, submersible pumps, hand tools, spray equipment, space heaters and much more.
News from Thorite (13 November 2006)
Process viscometer goes low
The Hydramotion VS10 process viscometer is billed as the first and only online viscometer capable of dealing reliably with viscosities lower than water. Brochure Available
News from Hydramotion (13 November 2006)
Package smoothes the switch to a new dimension
PTC and CAD Schroer Group are introducing the ultimate 2D to 3D design package.
News from CAD Schroer (13 November 2006)
Global steel manufacturing marches on
MEPS forecasts global crude steel manufacturing this year at 1237 million tonnes.
News from MEPS (International) (13 November 2006)
Software supplies powerful remote diagnostics
Software package provides designers, users and maintainers of automation systems with exceptionally powerful and cost-effective remote diagnostics capabilities. Brochure Available
News from Festo (13 November 2006)
Balancing system pays for itself in six months
User Application Article Since installation of the Lord Corporation's balancing system, Castle Cement estimates a savings of more than 200 hours per year increased production through the reduction of downtime.
News from TEVA (13 November 2006)
Integrated PLM toolset makes Lotus faster
User Application Article Long term Catia user Lotus Cars has expanded its design tools to include a full range of PLM solutions.
News from Dassault Systemes (13 November 2006)
Distributor targets SE waste management market
Edbro is expanding its fast-growing waste management activities in the South East of England with the appointment of Priden Engineering as a main distributor.
News from Edbro (13 November 2006)
Distribution deal completes simulation portfolio
Strategic partnership allows Cedrat to further its presence in the market of simulation software and Adapted Solutions to strengthen its international activities.
News from Cedrat (13 November 2006)
Plastics exhibition to expand by 10% in 2008
The floorplan for the next Plastics Design and Moulding exhibition (PDM 08) has been expanded by 10% to allow for further growth.
News from Emap Maclaren Polymer Group (13 November 2006)
Compressor upgrade cuts a third off energy costs
User Application Article Crown Speciality Packaging reports a massive 34% reduction in compressed air energy consumption that has significantly reduced energy costs. Brochure Available
News from Boge Compressors (13 November 2006)
Multiphysics package gains acoustics addon
Scientists and engineers interested in creating and measuring sound or acoustic waves can benefit from new simulation capabilities for the Comsol product line. Brochure Available
News from Comsol (13 November 2006)
Structural modelling and analysis is upgraded
LMS Virtual.Lab Rev 6 captures the complete modelling and analysis process, from general pre- and post-processing for structural analysis to multi-attribute performance simulation. Brochure Available
News from LMS International (13 November 2006)
Lenses come with antireflection coating
Optical components gain visible 0-degree antireflection coating option on plano-convex, plano-concave, double-convex, double-concave and achromatic lines.
News from Edmund Optics (13 November 2006)
Off-highway promotion for Shawaluk
Horton has appointed Neal Shawaluk to the position of Director of Sales, Off-Highway, Industrial and Specialty Markets.
News from Horton (13 November 2006)
Summit seeks out brightest minds in manufacturing
The SME is to partner with Trade Show Consulting for the North American Manufacturing Technology Summit taking place in June 2007 in Los Cabos, Mexico.
News from Society of Manufacturing Engineers (13 November 2006)
Flow switch protects pumps from overheating
The flow/level/temperature (FLT) pump protection flow switch reliably monitors the flow and temperature of liquids, gases, slurries, syrups, lubricants, coolants and more.
News from Fluid Components International (13 November 2006)
Measurement system rewrites the form book
Mahr has taken its many years of experience in form measurement systems back to the drawing board and has emerged with an entirely new, fully automated system for the measurement of form and position.
News from Mahr Federal (13 November 2006)
Serial devices join Ethernet via Bluetooth
The Parani-MSP100 is a Bluetooth to IP gateway that connects Bluetooth devices to 10/100 Base-T Ethernet network.
News from Sena Technologies (13 November 2006)
Solids and surfaces come together in 3D
Version 2.0 of Power NURBS simplifies the construction of complex geometry typical of the automotive, aerospace, medical, entertainment and organic modelling industries.
News from nPower Software (13 November 2006)
UK hydraulics industry turns out in force
The BFPA continues the well-established policy of helping member companies secure contracts and meaningful introductions in many developing markets around the world.
News from British Fluid Power Association (13 November 2006)
Full machining capability for Lifting Solutions
Lifting Solutions opens new machine shop.
News from Lifting Solutions (13 November 2006)
Silver jubilee for Safety and Reliability Society
Safety and Reliability Society celebrates silver jubilee AGM with change.
News from The Safety and Reliability Society (13 November 2006)
Total number of news releases published during the week: 178
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
