News releases on Engineeringtalk categorised by date
Sunday 13 May
to Saturday 19 May 2007
Device improves enclosure security
The Southco E-Keeper will accept signals from RF key fobs, numeric keypads, mag-stripe card readers, biometric scanners, networked security systems or even battery-powered remote access systems.
News from Southco (18 May 2007)
Company upgrades staff and machinery
William A Lewis Engineering believes apprenticeships are cost-effective for companies as well as for individuals.
News from Shrewsbury College (18 May 2007)
Motor provides slim design
Servotechnic's Haydon Planetary Gear Train Pancake Motor uses a gear train that is built inside the rotor.
News from Servotechnic (18 May 2007)
Servo drives trim salmon fillets
User Application Article Up to 12 axes of Lenze ECS servos position the knives on the Marel ITM fish trimming machine. Brochure Available
News from Lenze (18 May 2007)
Tiny M8 inductive sensor released
Contrinex' new M8 inductive sensor is packaged into a housing only 16mm long.
News from Contrinex UK (18 May 2007)
10-year fastener contract signed
User Application Article Northern Precision's superlative customer service and excellent product quality has resulted in an unfaltering 10-year supplier partnership with steel fabricator, AM Hazell.
News from Northern Precision (18 May 2007)
Resolver feedback support added to servo drives
Resolver feedback support increases the versatility of the Aries drive platform from Parker Electromechanical.
News from Parker Hannifin Electromechanical Automation (18 May 2007)
Right-angled gearheads open doors
User Application Article ZF's SWG right-angled gearheads significantly reduced purchase costs and offered additional safety for Oculas 2.0. Brochure Available
News from ZF Great Britain (18 May 2007)
Controller unit sends warnings by SMS
All setup and control of the SCOM-100 is performed with a mobile phone.
News from Infinite Industrial Informatics (18 May 2007)
Safeguarding guide released
Omron Scientific Technologies' 1500+ page, two-volume safeguarding guide contains a range of process safety solutions.
News from Omron Scientific Technologies (18 May 2007)
Single-port server connects RS-2332 devices
The LS110 features a nine-pin male DB-9 connector, 7.5V~15V DC power input, and supports data transfer speeds up to 115Kbit/s.
News from Sena Technologies (18 May 2007)
CAD solution upgraded
CADopia IntelliCAD is a powerful CAD solution for engineers, architects, designers and drafters
News from CADopia (18 May 2007)
Agricultural equipment company buys VR system
User Application Article Virtual reality (VR) demos helped CNH's managers to better understand the potentialities of VR technologies in their product development process Brochure Available
News from Virtalis (18 May 2007)
Fieldbus seminar planned in Brazil
A one-day seminar in Brazil will cover all aspects of Foundation automation infrastructure management.
News from Fieldbus Foundation (18 May 2007)
Guide wheel available in five lengths
Both the ball screw and belt driven SRX-150 are now available in 400, 600, 1000, 1500 and 1900mm stroke lengths.
News from Bishop-Wisecarver Corp (18 May 2007)
Committee promotes fieldbus technology
A new marketing committee is set to promote adoption of Foundation fieldbus technology by the Brazilian industry.
News from Fieldbus Foundation (18 May 2007)
Positioning indicator offers comfortable use
The VDSC+1 gravity positioning indicator is manufactured in resilient technopolymer, resistant to most common engineering/production-related chemicals. Brochure Available
News from Elesa (UK) (18 May 2007)
Surface generation patent awarded
The method of 3D curve and surface creation seen in FreeDimension constitutes an entirely new - and hence patentable - industry technique.
News from FreeDesign (18 May 2007)
Profibus module suits flow meters
The RHE 15 Profibus-DP module was developed for use with the Rheonik range of Coriolis mass flow meters.
News from Able Instruments and Controls (18 May 2007)
Ceramic company expands dental services
Morgan Electro Ceramics offers a complete design, manufacture and test service for specialist dental transducers.
News from Morgan Electro Ceramics (18 May 2007)
Light curtain has watertight housing
Safety light curtain with IP67 watertight housing is ideal for applications in the food industry, cold rooms and other washdown environments.
News from OEM Automatic (18 May 2007)
Wireless network passes power station test
User Application Article Wireless mesh network technology impresses power station engineers with its ability to collect sensor data reliably in electrically noisy environment.
News from Adaptive Wireless Solutions (18 May 2007)
Sightglasses simplify switchgear monitoring
User Application Article ABB now offers arc-resistant Hawk IR sightglasses as an IR-friendly option on its SafeGear medium voltage arc-resistant switchgear. Brochure Available
News from Hawk IR International (18 May 2007)
Software upgrades for Vista compatibility
Latest versions of LabWindows/CVI and Measurement Studio provide support for the newest version of the Microsoft operating system. Brochure Available
News from National Instruments (18 May 2007)
Grants support PR for engineering
The Royal Academy of Engineering is making 15 grants totalling GBP 346,090 to projects designed to promote public engagement with engineering.
News from Royal Academy of Engineering (18 May 2007)
Gateway handles a range of protocols
The Kalki CANOpen Gateway is ideal for connecting existing or new CANOpen devices to the Kalki Gateway.
News from Kalki Communication Technologies (17 May 2007)
Current transformers handle 60 to 2500A
Tyco Electronics' Crompton Instruments current transformers are easily and quickly installed where conventional foot/busbar mount devices are not practical. Brochure Available
News from Tyco Electronics - Energy Division (17 May 2007)
Disel gen-sets do well in Eastern Europe
While the diesel gen-sets market in Eastern Europe is doing well the Western European market is showing signs of maturity.
News from Frost and Sullivan (17 May 2007)
Installation testers keep up with standards
Fluke 1650 series multifunction installation testers comply with a recent update to the IEC61557 standard. Brochure Available
News from Fluke (UK) (17 May 2007)
Transducer deals with long wires
RDP Electronics' S7TW loop powered transducer can handle signal conditioning of LVDT position sensors in harsh industrial environments. Brochure Available
News from RDP Electronics (17 May 2007)
Vibro-acoustic conference brings experts together
VAUC 2007 offers visitors a chance to see how virtual prototyping solutions reduce the need for costly laboratory testing.
News from ESI Group (17 May 2007)
Rubber pad reduces vibration and noise
CMS Vibration Solutions' CMS ISOPad is used as a stress-resistant bearing to support highway bridges.
News from CMS Vibration Solutions (17 May 2007)
Bursting panels suit bulk distribution
Customers can add Elfab's ATEX-approved integral burst detection system to the standard Vent-Gard panel.
News from Elfab (17 May 2007)
Pressure sensor changes units with a button push
The American Sensor Technologies (AST) AG200 provides the quality and performance of an AST sensor, with the additional benefits of a local readout.
News from American Sensor Technologies (17 May 2007)
Reporting software supports Windows Vista
DIAdem 10.2 is the latest version of National Instruments' interactive data management, analysis and reporting software. Brochure Available
News from National Instruments (17 May 2007)
Company announces CAM acquisition
PTC has acquired NC Graphics, a producer of software for optimising tool making and high-speed precision machining processes.
News from PTC - Parametric Technology (UK) (17 May 2007)
Flow sensors monitor building air
Omron's D6FW and D6FV MEMS-based sensors both incorporate a dust segregation system (DSS) that separates up to 99.5% of dry airborne particulates. Brochure Available
News from Omron Electronics (17 May 2007)
Forklift company adopts CAD
User Application Article A combination of SolidWorks, Cosmos, and the PDMWorks product data management tool has allowed Combilift to reduce product development time by 40%.
News from SolidWorks Corporation (17 May 2007)
Initiative allows early simulation
Simulia SLM solutions will enable companies to integrate simulation earlier and more effectively into their product and process development activities
News from Dassault Systemes (17 May 2007)
Machine vision systems handle two cameras
Dalsa VA3X products provide quick user setup, factory-friendly wiring and support for one or two cameras with choice of sensor resolution.
News from ipd (17 May 2007)
Vice Chairman appointed to advisory council
Dr Graeme Philp has been elected as Vice-Chairman to the Fieldbus Foundation's Europe, Middle East and Africa (EMEA) Executive Advisory Council (EAC).
News from Fieldbus Foundation (17 May 2007)
Connector housings suit the food industry
Harting's Han Inox offers rugged, corrosion-free, IP65/67 protected connections to ensure reliable operation in the toughest external environments.
News from Harting (17 May 2007)
Date set for composites seminar
Altair Engineering's free, one-day Composites Seminar will explore how HyperWorks can unlock the potential of composite design to improve performance
News from Altair Engineering (17 May 2007)
Power supply cuts weight dramatically
At just 1.4kg the Puls X series power supply unit is dramatically lighter than a typical transformer equivalent, which can weigh as much as 26kg.
News from OEM Automatic (17 May 2007)
Pressure transmitter suits mobile hydraulics
Huba Control AG has developed the new Type 515 pressure transmitter for use on mobile hydraulic applications such as tractors, cranes, and earth moving machinery. Brochure Available
News from Huba Control UK (17 May 2007)
Power quality seminar promises dramatic impact
Technical seminar will provide excellent opportunities to interact with industry specialists in the power quality field.
News from Copper Development Association (17 May 2007)
New plant to make metal foams
Metafoam Technologies is setting up a new plant in the Montreal Metropolitan Area.
News from Metafoam Technologies (17 May 2007)
Website brings pump news up to date
Newly updated website includes expanded news and information section.
News from Hayward Tyler (17 May 2007)
The expanding electrical toolbox
Technical Background Article Scott Black looks at the essential tools of the trade for electrical plant maintenance and installation.
News from Extech Instruments (17 May 2007)
New elected president of the BOHS
John Cherrie, Research Director at the Institute of Occupational Medicine, elected BOHS President.
News from British Occupational Hygiene Society (17 May 2007)
Explosion-proof products to follow EU regulations
Lifting Solutions is launching explosion-proof products.
News from Lifting Solutions (17 May 2007)
Safety demonstrations expanded
The Fieldbus Foundation has developed specifications for safety instrumented functions in co-operation with the world's leading automation end users
News from Fieldbus Foundation (16 May 2007)
Pressure sensor monitors reinforced plastic moulds
Kistler Instruments' Type 6182BCE miniature mould pressure sensor is suitable for small parts moulding in multi-cavity moulds.
News from Kistler Instruments (16 May 2007)
Ethernet switch offers PoE technology
Moxa's EDS-P308 provides economical deployment, increases mobility and simplifies wiring for network connection.
News from Moxa Technologies (16 May 2007)
Design software simplifies work
Cedrat's Flux 10 helps users to design electrical motors, transformers, high-voltage systems and nondestructive evaluation processes.
News from Cedrat (16 May 2007)
Cylinders offer high-accuracy positioning
Festo's DNCE series electrical cylinders are available in 32, 40 and 63mm frame sizes and with standard stroke lengths from 100 to 800mm in 100mm steps depending on size. Brochure Available
News from Festo (16 May 2007)
Gas detectors receive new approvals
Crowcon's single and multiple gas detectors are certified for use throughout the US and Canada for hazardous area applications. Brochure Available
News from Crowcon Detection Instruments (16 May 2007)
Flowmeters receive hazardous area certification
AW-Lake's RT-Ex15 meter-mounted flow monitor has received CSA and Inmetro explosion-proof certification for use in Class I/Div 1 hazardous areas.
News from AW-Lake Company (16 May 2007)
Certification road show kicks off
The LMI's road show is aimed at anyone who wishes to learn more about real cost and energy savings with interoperable systems.
News from LonMark International (16 May 2007)
Linear position sensors tolerate radioactivity
Macro Sensors' HSTAR linear position sensors can tolerate high temperatures and mild radiation.
News from Macro Sensors (16 May 2007)
Discrete I/O added to Ethernet blocks
Acromag's EtherStax line of rugged, high-density Ethernet I/O blocks process 32 discrete inputs and 16 outputs with a Modbus TCP/UDP/IP interface to a host controller.
News from Acromag (16 May 2007)
Website offers an early look at software
The new IntelliCAD is based on DWGdirect, a nonproprietary design format compatible with ARX and Autodesk-related systems available from the Open Design Alliance.
News from IntelliCAD Technology Consortium (16 May 2007)
Kit combines three filters
The 3K9 is composed of three Schroeder K9 filters supplied in a series as a single filter, providing effective single pass particulate and water filtration.
News from Schroeder Industries (16 May 2007)
System monitors potential hazards
Electro-Sensors' Electro-Guard Hazard Monitoring System combines shaft speed, belt alignment and bearing temperature measurement.
News from Electro-Sensors (16 May 2007)
Finite element analysis software updated
Abaqus Version 6.7 allows engineers to share model data and results seamlessly across workgroups.
News from Abaqus (16 May 2007)
Optical frame sensor handles tough environments
The FS optical frame sensor from STM has been developed from its RLS frame sensor range.
News from OEM Automatic (16 May 2007)
Pressure sensor allows easy integration
The SC400 Tecsis pressure sensor offers a full stainless steel construction, a display and pressure connection that can rotate 330 degrees
News from OEM Automatic (16 May 2007)
Laser optics suit stringent applications
Armstrong Optical's components are available either as precision machined blanks or as polished flat-surfaced optics.
News from Armstrong Optical (16 May 2007)
Warranty extended on noncontact sensors
Lion Precision's general sensor lines have lower failure rates than its LRD line of label sensors, which has always carried a two-year warranty.
News from Lion Precision (16 May 2007)
GBP 1 million boiler tube order placed
Esshete 1250 (EN 1.4892) steel grade boiler tubes will be used at the Drax power station to replace superheater tubing to cover outage needs during 2007.
News from Sandvik Materials Technology UK (16 May 2007)
Viscosity sensor monitors oil
User Application Article The ViSmart viscosity sensor detected changes in oil condition as a function of viscosity to an accuracy and repeatability value of 1%.
News from Vectron International (16 May 2007)
Mobile guarding system protects welders
New mobile guarding system from Troax creates versatile safety solution for welding applications.
News from Troax UK (16 May 2007)
Rings help rocket car go skiing
User Application Article TFC recently became involved in a project to send a Mini-Cooper down the Lillehammer ski slope in Norway. Brochure Available
News from TFC (15 May 2007)
Specification updates ease configuration
ODVA's specification updates bring a range of enhancements to the specifications aimed at delivering increased ease of configuration for users.
News from ODVA (15 May 2007)
US $400,000 grant helps cut vehicle emissions
Camcon has developed a digital valve which has the potential to improve engine performance and reduce exhaust emissions by up to 20% due to its precise control over combustion.
News from Camcon Technology (15 May 2007)
Rotary bushings offer smooth movement
Ondrives' Stroke rotary bushings can operate in both linear and rotary directions at the same time.
News from Ondrives/Rino Industries (15 May 2007)
High-speed cameras co-operate
A new report has highlighted the advantages of synchronising the SIM Ultra Fast Framing camera with a high-speed video camera.
News from Specialised Imaging (15 May 2007)
EU funding offers innovation opportunities
Rapra Technology is now in the process of bidding for FP7 funding in a broad range of polymer-related areas.
News from Smithers Rapra (15 May 2007)
Test instrument website upgraded
Clare Instruments' site has been completely restructured to incorporate a range of new features to help users identify the right electrical safety tester for their needs. Brochure Available
News from Clare Instruments (15 May 2007)
Gateway device suits engine logging
Grant Instruments' dataTaker CANgate CAN-to-ASCII gateway device converts CAN (controller area network) and GPS (global positioning system) data to serial data.
News from Grant Instruments (Cambridge) (15 May 2007)
Process pumps support bioaugmentation system
User Application Article Watson-Marlow Bredel's 700 series peristaltic pump is so important to the correct functioning of the Baccelerator that the whole biological activation system is built around the pump. Brochure Available
News from Watson-Marlow Bredel Pumps (15 May 2007)
Monitoring software handles multiple users
GE Fanuc Automation has announced the immediate availability of Proficy HMI/Scada - Cimplicity 7.0, the company's award-winning supervisory monitoring and control software. Brochure Available
News from GE Fanuc Intelligent Platforms UK (15 May 2007)
Safety controller company expands into Italy
Logitec Automazione has been actively representing HIMA in Italy since 1987 in the area of safety-related controllers, an area which will now be further expanded. Brochure Available
News from Hima Paul Hildebrandt (15 May 2007)
Actuators control instruments in Jerusalem
User Application Article NSF Controls solenoids are actuating computer-controlled musical instruments, in a sound presentation at Tower of David Museum in Jerusalem, Israel. Brochure Available
News from NSF Controls (15 May 2007)
Autodesk reseller moves to new offices
Imass Design Solutions' (iDS) new offices include improved training facilities, on-site customer conference amenities and meeting rooms.
News from Imass (15 May 2007)
DC motors squeeze power into a small package
Pittman series 1300 slotted brushless DC servomotors are suitable for data storage, medical/biotech, semiconductor processing and automation applications.
News from Ametek Technical and Industrial Products (15 May 2007)
System automatically calibrates sensors
The MB Win 475 allows ICP, charge and voltage mode accelerometers to be tested while the system is driven through a PC interface.
News from Calibration Dynamics (15 May 2007)
Weight controller receives new options
Hardy Instruments' HI 4050 weight controller is available with a rate of change weight monitoring capability, four-channel analogue, and Modbus TCP/IP network communications.
News from Hardy Instruments (15 May 2007)
Linear encoder reads perforated tape
The Vectral Meterdrive linear encoder now has output signals that are now fully secured and the circuit is completely sealed, enabling the protection rating to be increased to IP67.
News from Vectral (15 May 2007)
Geometry software showcased
Mountains has been subject to over 15 years of continuous evolution driven by a multi-disciplinary team of specialists in metrology, software, and signal and image processing.
News from Digital Surf (15 May 2007)
CAD helps school robots compete
User Application Article Entries to the world First Robotics Competition (FRC) and the national BattleBots IQ competition were designed using SolidWorks 3D CAD software.
News from SolidWorks Corporation (15 May 2007)
Servo controller handles rotary knife applications
User Application Article QuickSilver Controls' SilverDust servo controller/driver is now capable of handling rotary knife applications, found in packaging lines.
News from QuickSilver Controls (15 May 2007)
Modular system brings machine safety together
Modular system saves space, simplifies wiring and above all, offers a flexible solution to machine safety.
News from OEM Automatic (15 May 2007)
Tough encoders handle harsh environments
Rugged single-turn absolute magnetic encoders are particularly suited to applications on mobile outdoor equipment such as refuse lorries, tractors, earthmovers etc.
News from OEM Automatic (15 May 2007)
Slotless motors reduce inertia
22mm brushless motors provide fast acceleration and deceleration thanks to low inertia and a low mechanical time constant.
News from Danaher Motion (15 May 2007)
Acquisition software links serial devices to Vista
The latest version of WinWedge acquisition software that has been recompiled to work with all versions of Windows, including Windows Vista.
News from TAL Technologies (15 May 2007)
Handles are made for fingertip control
Arched pull handles enable easy sliding of folding doors or cabinet drawers, and can be operated with a single finger.
News from Winco (15 May 2007)
Acquisitions expand measurement and analysis
LumaSense Technologies has expanded with the closing of two further acquisitions.
News from LumaSense Technologies (14 May 2007)
Phase-angle controllers cover a range of loads
Reotron operating parameters can be set up manually over the field-bus interface or locally through a user-friendly touch-panel. Brochure Available
News from REO (UK) (14 May 2007)
Probes handle tough measurement applications
Labfacility industrial probes are terminated in an aluminium, screw top head which can house a terminal block or temperature transmitter.
News from Labfacility (14 May 2007)
Integrated automation aids modern factories
Rockwell Automation's RSLogix 5000 version 16 software contains comprehensive PowerFlex AC drive profiles. Brochure Available
News from Rockwell Automation Anorad (14 May 2007)
Vibro-acoustic conference scheduled
Attendees of VAUC 2007 will have the opportunity to hear papers presented by major industry professionals and learn about the latest in vibro-acoustic software and simulation methods.
News from ESI Group (14 May 2007)
Software company celebrates anniversary
The new Engineered Software Headquarters boasts 72% more space, more than doubling in size.
News from Engineered Software (14 May 2007)
Catalogue covers bearing housings
Rino assemblies are made in-house using the latest CNC technology to guarantee accuracy and a high-quality finish.
News from Ondrives/Rino Industries (14 May 2007)
Cruise ship engines monitored by satellite
User Application Article Data is fed directly and in real-time from condition monitoring systems on the Queen Mary II to both on-board and on-shore monitoring and control stations. Brochure Available
News from SKF UK (14 May 2007)
Power relay removes the need for a heatsink
Thanks to silent operation Crouzet's hybrid power relay is the ideal switching component for applications where absence of noise is of paramount importance.
News from OEM Automatic (14 May 2007)
Lamps suit laser applications
One of Heraeus Noblelight's new lamps has been developed for high-precision laser applications which require a very stable light output. Brochure Available
News from Heraeus Noblelight (14 May 2007)
Actuator handles heavy loads quickly
Parker Electromechanical's HPLA linear actuator has a thrust force of 5500N and will carry loads of up to 1.6 tonnes at speeds up to 5m/s.
News from Parker Hannifin Electromechanical Automation (14 May 2007)
Aluminium chosen for machine guarding
Valuframe aluminium profile machine guards can be constructed quickly, requiring no welding or painting.
News from Automation Supplies (14 May 2007)
Variable frequency drive range extended
A modular design allows the VLT AutomationDrive to handle every motor control requirement from a single product platform.
News from Danfoss Drives (14 May 2007)
Motor catalogue updated
Maxon Motor's new catalogue covers 147,000 precision motors, gearheads, encoders, controllers and other components. Brochure Available
News from Maxon Motor UK (14 May 2007)
Gearbox range extended
CHM (Motorvario) and CHB (Bonfiglioli) gearboxes from Transdev provide industry standard interchangeability
News from Transmission Developments (14 May 2007)
PLCs suit small automation systems
VIPA, the leading German manufacturer of innovative PLC and PC based automation systems has introduced two low-cost, compact PLC's with fixed I/O based upon its ultra-fast SPEED7 processor technology.
News from Vipa (14 May 2007)
DIY machining centres give users increased control
The mechanical elements of FlatCom are precision engineered to robust designs to ensure exceptional rigidity and minimal vibration. Brochure Available
News from Unimatic Engineers (14 May 2007)
Assessment service expanded
Invetech offers an integrated range of services for the biotechnology market, including process development, process optimisation and product specification.
News from Invetech (14 May 2007)
RFID added to vibration sensor
Schaeffler is adding RFID technology to its FAG Detector III handheld vibration monitoring and balancing system. Brochure Available
News from Schaeffler (UK) (14 May 2007)
Actuators boost productivity and precision
LMA/LMAC actuators include dual sealed linear motion guide bearings and robust chain type cable management for a complete positioning solution. Brochure Available
News from Aerotech (14 May 2007)
Motor company changes name and location
Zeitlauf has moved to new, larger premises in Buckingham, as well as changing its name to Zeitlauf Gearmotors.
News from Zeitlauf UK (14 May 2007)
Outsourcing speeds aerospace industry growth
Technical Background Article Business is booming again in the aerospace industry, says Suresh Babu, Global Head of Aerospace Practice, Tata Consultancy Services.
News from Tata Consultancy Services (14 May 2007)
LEDs are on the spot for illumination
High-intensity LED spotlights replace conventional halogen point-sources as well as fibre optic illumination solutions for inspection and machine vision.
News from StockerYale (14 May 2007)
Industrial control systems net advantages
Technical Background Article Jeremy Shinton of Mitsubishi Electric looks at the possibilities for web-enabling industrial control systems. Brochure Available
News from Mitsubishi Electric Automation Systems (14 May 2007)
The next ten years in pneumatics
Technical Background Article Can we learn about the future by reviewing the past? Hoerbiger-Origa MD Ray Barnes applies the theory to 10-year increments in the pneumatics industry. Brochure Available
News from Hoerbiger-Origa (14 May 2007)
Total number of news releases published during the week: 122
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
