News releases on Engineeringtalk categorised by date
Sunday 4 November
to Saturday 10 November 2007
Software streamlines door design
User Application Article OneSpace Model Manager stores and retrieves design information, with easy access options for departments other than the design department.
News from CoCreate Software ( 9 November 2007)
Instrument verifys tyre type
Location of the centre of the wheel and bolt/stud holes is achieved by the greyscale camera system, allowing fast and accurate location for pick and place or wheel fitting robots.
News from Oxford Sensor Technology ( 9 November 2007)
Sensors simplify detection tasks
Once unpacked, the FA 45 is positioned and connected via Ethernet and M12 sensor connectors in no time at all.
News from Sensopart UK ( 9 November 2007)
PLM software helps manage electronics development
User Application Article Windchill PDMLink provides SEC with an engineering information exchange environment for product specifications, drawings and change management with its extended supply chain.
News from PTC - Parametric Technology (UK) ( 9 November 2007)
Compensator improves network power quality
The Dynacomp acts as an ultra-rapid and transient-free capacitor bank with the reactive power step switching carried out by thyristor modules.
News from ABB Power Technologies ( 9 November 2007)
Sensors improve reliability for aluminium producer
User Application Article Series 700 sensors can withstand extreme impact, high shock levels and are resistant to virtually any chemical stress.
News from Contrinex UK ( 9 November 2007)
Servo motors squeeze power into a small package
AKM motors come in seven standard flange sizes of 40 to 188mm, with different flange/pitch circle versions available on request.
News from Micromech ( 9 November 2007)
Fibre optic system aids motor sports
MCT's MEG 801 is based on a central unit that houses a number of small optical receivers, as well as a main microprocessor, constructed using low mass, surface-mounted components.
News from MCT ( 9 November 2007)
Custom heaters cut production times
Long, medium and short wave infra-red heaters are available using ceramic, quartz and quartz tungsten elements, respectively.
News from Hawco ( 9 November 2007)
Temperature monitors provide information online
Adept Scientific's Web-Temp and Web-TC allow users to take temperature measurements and monitor them via the internet. Brochure Available
News from Adept Scientific ( 9 November 2007)
Field metrology wells handle 660C environments
Hart Scientific's field metrology wells maximise speed and portability without compromising key metrology performance criteria. Brochure Available
News from Fluke Precision Measurement ( 9 November 2007)
Digital tooling cuts costs for small designs
Precision Micro can manufacture a component in the time it takes to design a conventional tool.
News from Precision Micro ( 9 November 2007)
PLM software eases communication with customers
User Application Article Omnify's PLM system provides a single environment for creating and changing product information and enables vital product data to be easily shared between IMS and its customers.
News from Omnify Software ( 9 November 2007)
Software helps keep skiers safe
User Application Article For the Targa Ascent telemark ski binding, Shute performed Algor linear static stress analysis of all of its components.
News from Algor ( 9 November 2007)
Fibre optics course targets aerospace users
The course teaches attendees how to successfully implement, support and maintain fibre optic technology in the aerospace industry.
News from Lucid Optical Services ( 9 November 2007)
Smart cameras cut the cost of inspection
The cameras are shipped with an interactive software environment for configuring, benchmarking and deploying machine vision applications without programming. Brochure Available
News from National Instruments ( 9 November 2007)
Digital cameras provide a range of frame rates
The Sony XCD-U100 B and W and XCD-100CR colour models feature 1600 x 1200 UXGA resolution from the 1/1.8 type progressive scan interline technology CCD sensor
News from Sony Europe - Image Sensing Solutions ( 9 November 2007)
Sensor suits medical imaging applications
Fogale Nanotech's Body Angel provides both an anti-collision safety function and can simultaneously perform 3D contouring of the patient for higher efficiency.
News from Fogale Nanotech ( 9 November 2007)
Consumables branch opens in Nigeria
Wyko Nigeria will offer industrial consumable products from leading manufacturers, as well as the ability to draw immediately upon the group's stocks located throughout Europe. Brochure Available
News from Eriks UK ( 9 November 2007)
Scada growth accelerates
ARC has analysed the Scada market by geographic region, project size and component type, including hardware, software and services.
News from ARC Advisory Group ( 8 November 2007)
Electronics company rolls out PLM solution
User Application Article Siemens PLM Software's NX and Teamcenter will enable Canon to enhance innovation and collaboration, as well as speeding up the development cycle.
News from Siemens Automation and Drives ( 8 November 2007)
Ethernet isolators tolerate hazardous jobs
FieldConnex Ethernet Isolators combine intrinsically safe energy limitation and galvanic isolation in one product. Brochure Available
News from Pepperl+Fuchs GB ( 8 November 2007)
Pump limits environmental impact
The eco-design approach to product design aims to minimise the environmental impact of a product during its entire lifecycle.
News from PCM Pompes ( 8 November 2007)
Additive layer technology meets design challenge
User Application Article Ashuach's AI light incorporates five digital sensors that cause it to move and morph its structure in response to changes in the space that it is illuminating.
News from EOS Electro Optical Systems (UK) ( 8 November 2007)
Industrial PC provides mounting flexibility
The SealTouch-15 has an Intel Celeron M 1.5GHz processor with 512Mbyte DDRAM, a 40Gbyte hard drive, integral Ethernet and a 15in touchscreen display. Brochure Available
News from GE Fanuc Intelligent Platforms UK ( 8 November 2007)
Software meets student needs
LabView 8.5 Student Edition gives students a flexible, hands-on environment to design, prototype and deploy engineering and science concepts into real-world applications. Brochure Available
News from National Instruments ( 8 November 2007)
Polymer handles tough aircraft job
User Application Article Victrex Peek polymer houses the system built into aircraft landing gear, which must be able to survive some of the most extreme environments and loading conditions.
News from Victrex USA ( 8 November 2007)
Modem acquisition expands Sixnet's reach
Sixnet's acquisition of BlueTree Wireless Data allows more customers to be reached in more places, with a stronger, wider array of products and services. Brochure Available
News from Sixnet ( 8 November 2007)
Project targets cost of automotive batteries
Ricardo and QinetiQ aim to slash the cost of Lithium-Ion batteries for hybrid vehicles while protecting or further improving vehicle performance.
News from Ricardo ( 8 November 2007)
Contactors and control relays cut costs
RS Components' own-brand contactors and control relays meet international standards and have been tested in the RS laboratory to ensure they are robust and reliable in service.
News from RS Components UK ( 8 November 2007)
Brochure details after-sales support
The Instrumentation Service Brochure provides plant operators with all they need to know to ensure that their equipment continues to deliver optimum efficiency.
News from ABB Automation Tech (Instrumentation + Automation) ( 8 November 2007)
Interface panel provides connection options
The G315's Ethernet 10/100 Base-TX port delivers unprecedented connectivity by supporting up to four protocols simultaneously.
News from Red Lion Controls ( 8 November 2007)
PTC acquires aviation supplier
PTC and LBS offer the industry's only turn-key solutions for S1000D-compliant technical publications, provisioning, training and e-learning and logistics support analysis.
News from PTC - Parametric Technology (UK) ( 8 November 2007)
Thread checking system automates monitoring
SMAC's in-line thread checking system is designed for applications where conventional solutions such as cameras, vision systems, lasers or Eddy current probes are problematic or unsuccessful. Brochure Available
News from SMAC Europe ( 8 November 2007)
Safety system monitors several guards
The CES-AR-C noncontact safety switch is particularly suitable for systems in which a large number of safety guards need to be monitored.
News from Euchner (UK) ( 8 November 2007)
Catalogue eases gearbox specification
Gearbox catalogue has been completely redesigned with many new technical aspects highlighted and added to ease selection of ordering for customers.
News from Ondrives/Rino Industries ( 7 November 2007)
Dynamic modelling adds a new dimension
User Application Article Chikuma Seiki was looking for a 3D product development platform that would allow immediate response to customer-driven requirement changes.
News from CoCreate Software ( 7 November 2007)
Accelerated imaging aids analysis
Multichannel framing camera promises the ultimate in ultra-high-speed imaging performance in areas including material studies, automotive research, aerospace and nanotechnology.
News from Specialised Imaging ( 7 November 2007)
Industrial switches ease motorway congestion
User Application Article Industrial Etherent switches are used in a pilot scheme designed to reduce motorway congestion at peak times.
News from GarrettCom Europe ( 7 November 2007)
Compact coupling enables precision conveying
User Application Article The Semiflex Compact Plus C 230 provides a combination of high torsional stiffness, a very short design and a high radial misalignment capacity.
News from Schmidt-Kupplung ( 7 November 2007)
Stainless motor cleans up on spud preparation
User Application Article Stainless steel motor offers numerous benefits in addition to its inherent rust resistance.
News from Marlin Stainless ( 7 November 2007)
Super-short sensors get right to the point
SuperShorties can be mounted in the tightest of spaces, and are much less likely to cause an obstruction or suffer accidental damage.
News from Balluff UK ( 7 November 2007)
Noise control needn't cost the earth
Many noise control measures can be justified simply on the basis of the productivity gains, with the lower noise levels as an additional bonus.
News from Industrial Noise and Vibration Centre ( 7 November 2007)
HMIs are made for diesel-powered equipment
Application-specific engine gauges and instrumentation for diesel powered equipment is available in just hours if required.
News from CANtronik ( 7 November 2007)
High-temperature IR sensor needs no cooling
Noncontact sensor enables temperature measurements from - 40 to +975C in ambient temperatures up to 250C without any cooling of the sensor head. Brochure Available
News from Micro-Epsilon UK ( 7 November 2007)
High-viscosity fluids transferred at speed
Air-operated piston pumps are particularly effective for transferring thick, viscous liquids from tanks, drums and IBCs.
News from Pump Engineering ( 7 November 2007)
Future developments for electric motors
Technical Background Article Brian Bannister uses his crystal ball to predict forthcoming product developments in the motor sector.
News from Lafert Electric Motors ( 7 November 2007)
Camera modules add 5Mpixel colour capability
The XCL-5000 series cameras provide high quality, 1600 x 1200 UXGA 5Mpixel resolution and deliver up to 15 frames per second.
News from Sony Europe - Image Sensing Solutions ( 7 November 2007)
Thermal imaging camera passes the test
User Application Article Swift payback of its first InfraCAM has led Amec to purchase a second unit to carry out further trials for the routine inspection of plant on oil platforms. Brochure Available
News from Flir Systems ( 7 November 2007)
Measurement unit aids navigation and control
MEMS inertial measurement unit contains an internal ultra-low-power attitude and heading reference system processor and a real-time Kalman filter. Brochure Available
News from Inertial Aerosystems UK ( 7 November 2007)
Blender controller enters distributed control mix
Three-term PID controller provides a cost-effective yet powerful and flexible solution for two-stream controlled rate or "wildstream" blending and analyser trim applications.
News from Jiskoot ( 7 November 2007)
Submersible transducer adds tougher cable
Datalogging level transducer adds option for ETFE jacketed cable for increased durability and corrosion resistance in liquid level monitoring applications.
News from Pressure Systems ( 7 November 2007)
Flowmeters detect smaller quantities of gas
Even the smallest leaks in compressed air and other gas systems can be detected. Brochure Available
News from IFM Electronic ( 7 November 2007)
Conversion software works with 3D PDFs
Groundbreaking software enables easy bidirectional conversion between Adobe PDF and Lattice's XVL. Brochure Available
News from Lattice Technology ( 7 November 2007)
Novel optics improve dewpoint measurement
Cooled mirror dewpointmeter promises unmatched accuracy in dew point measurements for both calibration and process critical applications. Brochure Available
News from Michell Instruments ( 7 November 2007)
Stereolithography material has clear advantage
WaterShed XC delivers parts that look more like true, clear engineered plastic. Brochure Available
News from DSM Somos ( 7 November 2007)
Compressors mobilise aircraft maintenance
User Application Article CompAir's LS15 compressors are a third lighter than the compressors Support Air used previously, and less than half the volume.
News from CompAir UK ( 7 November 2007)
Drives handle ale efficiently
User Application Article Three axes of Lenze 9300 drives are used to position the casks and remove the plugs, known as the keystone and the shive. Brochure Available
News from Lenze ( 6 November 2007)
Satellite roller screw transmits high loads
The many points of contact give a satellite roller screw greater rigidity and shock tolerance than a ball screw without a compromise in friction or efficiency. Brochure Available
News from Abssac ( 6 November 2007)
Sensors monitor oil in compressed air
Oil Control does not react to the rise of the differential pressure, instead monitoring changed remainder oil rates in the streaming compressed air. Brochure Available
News from Beko Technologies ( 6 November 2007)
Choosing the right bearing coating
Technical Background Article Dr Steve Lacey, Schaeffler UK Engineering Manager, discusses the importance of selecting the right coating or corrosion-resistant material for rolling bearings operating in harsh environments. Brochure Available
News from Schaeffler (UK) ( 6 November 2007)
Compressed air system suits petroleum application
User Application Article The compressed air is to be used to supply instrument quality compressed air to accommodate ambient conditions that in mid summer are hot and hostile. Brochure Available
News from Beko Technologies ( 6 November 2007)
Consultancy launches Indian subsidiary
Ricardo India Private will be chaired by Surjit Singh Kalra, who has been Ricardo's representative in India for over 20 years.
News from Ricardo ( 6 November 2007)
Installation testers meet new wiring requirements
It is essential that installers ensure that their test equipment is ready for use with the new regulations. Brochure Available
News from Fluke (UK) ( 6 November 2007)
Sensors suit dangerous environments
Impress Sensors and Systems' temperature limiters/controllers, pressure transmitters, screw-in transmitters, submersible probes and level control switches suit hazardous area applications.
News from Impress Sensors and Systems ( 6 November 2007)
Software chosen for sports car design
User Application Article Lengthening waiting lists for the cars have led Westfield Sportscars to consider ways to minimise lead times.
News from Autodesk ( 6 November 2007)
Motors ease biscuit production
User Application Article Marlin stainless motors were installed in a five-leg oil spraying gantry system that coats Twiglets as they pass below on a conveyor.
News from Marlin Stainless ( 6 November 2007)
Engine powers bottle crusher
User Application Article An integral component of the bottle crusher is the single-phase motor from Lafert Electric Motors.
News from Lafert Electric Motors ( 6 November 2007)
CAD software used for biofuel project
User Application Article Bouldin and Lawson's process yields a wood pulp-like substance called Fluff, used for everything from construction material to park benches to potting material for plants.
News from SolidWorks Corporation ( 6 November 2007)
Flange protectors extend pipe lifetimes
Unprotected gaps around the outside diameters of flange joints allow moisture and debris to degrade a ring joint or gasket edge and reduce sealing efficiency. Brochure Available
News from James Walker Moorflex ( 6 November 2007)
DC blowers offer high flow rates
Speed can be adjusted internally with an onboard potentiometer or with an external PWM or DC control that actively varies blower performance.
News from Ametek Technical and Industrial Products ( 6 November 2007)
CNC machines bring down carving costs
The Isel machine is designed for production routing and drilling on a wide variety of materials including wood, plastic, MDF, solid surfacing materials and nonferrous metals.
News from Micromech ( 6 November 2007)
Panel PC fits in tight spaces
Aaeon's AOP-8060XT panel PC is designed for entertainment, kiosk, vending machine and machine control panel or factory automation applications.
News from Aaeon ( 5 November 2007)
Torque transducer meets test bench standards
HBM has designed the TB2 for nonrotating use with continuous calibration and for static and dynamic measurement. Brochure Available
News from HBM UK ( 5 November 2007)
Interlock switch improves food industry safety
The Idemag CPR range offers a slimline fitting and provides environmental protection up to 80C. and is suitable for high-pressure hosing.
News from Idem Safety switches ( 5 November 2007)
Universal amplifier suits all transducers
Transducers fitted with TEDS technology are automatically recognised as soon as they are connected to QuantumX. Brochure Available
News from HBM UK ( 5 November 2007)
Switches suit explosive environments
RMQ-Titan products are approved for use in dust areas Zone 22, Category 3 and are approved for device group II, which covers all applications except those associated with mining.
News from Moeller Electric ( 5 November 2007)
Low-cost hoses avoid leaks
The relevant fitting is simply positioned on the end of the hose and the pair can then be inserted into the unit and crimped, producing a leak-free connection. Brochure Available
News from Parker Hannifin ( 5 November 2007)
Vision handbook released online
The basic principles and requirements of machine vision remain largely unchanged in the last 15-20 years.
News from UK Industrial Vision Association ( 5 November 2007)
Module increases connection efficiency
There is virtually no risk of mixing up of cable cores with RJ connectors and testing of the strain gauges is simplified. Brochure Available
News from HBM UK ( 5 November 2007)
Plastics acquisition brings new expertise
The acquisition of PTLI enhances Intertek's polymer and plastic testing capabilities in North America and complements existing polymer and plastic testing laboratories.
News from Intertek ( 5 November 2007)
Fasteners create help decorate for Christmas
User Application Article The Smart Band is plastic, so it doesn't scratch or damage the street furniture, so when Christmas lights are attached to lamps, the paint doesn't peel.
News from HCL Fasteners ( 5 November 2007)
Position sensor suits explosive environments
Everight Precision Technologies' Positek E111 linear position sensor can be used in areas with continuous, long or frequent periods of exposure to hazardous gas and dust.
News from Everight Precision ( 5 November 2007)
Transducer serves as actuator or sensor
DuraAct transducers can be applied to structure areas where deformations are to be generated or detected. Brochure Available
News from Lambda Photometrics ( 5 November 2007)
Control system slash response times
XFC represents a control technology that enables very fast and highly deterministic responses.
News from Hayes Control Systems ( 5 November 2007)
Scanner tests weld quality
The Mini Magman can be used on everything from flat plate to pipes as small as three-inch outside diameter and is the suitable tool for testing pipe to elbow welds.
News from Phoenix Inspection Systems ( 5 November 2007)
Laser scanning company expands in India
GKS India is one of the largest such operations in India and the only one with the high-accuracy scanning capabilities of its Laser Design Surveyor DS-3040 3D laser scanning system.
News from GKS Inspection Services ( 5 November 2007)
Pressure transducer resists vibration effects
Because of its high overload capacity, the P8AP transducer is ideal for mobile testing or mobile test benches. Brochure Available
News from HBM UK ( 5 November 2007)
LVDT-based transducers are made for gauging
Sensors feature precise repeatability and stability by the use of Swiss-quality linear ball bearings and high-quality materials throughout. Brochure Available
News from RDP Electronics ( 5 November 2007)
Cables cope with rigours of robotics
Single-core cable is designed to withstand high levels of torsion in all three dimensions. Brochure Available
News from Igus UK ( 5 November 2007)
Encoder is rugged and durable
Incremental encoder can be used in applications ranging from routine industrial automation to state-of-the-art weapon systems.
News from Foremost Electronics ( 5 November 2007)
Fans of a long life
Axial flow fans combine an integral filter or alarm circuitry with a long lifetime.
News from Oriental Motor ( 5 November 2007)
Total number of news releases published during the week: 92
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000

