News releases on Engineeringtalk categorised by date
Sunday 2 March
to Saturday 8 March 2008
Analogue transmitter offers easy setup
The C201 accepts inputs from standard two and three-wire Pt100 sensor interfaces, including IEC 60751, JIS C 1604 and several US standards.
News from Hawco ( 7 March 2008)
Catalogue details accelerometer range
Wilcoxon Research's new vibration sensor catalogue has a handy sensor selection guide to help choose the right accelerometer or 4-20 mA sensor for the application.
News from Wilcoxon Research ( 7 March 2008)
Compact I/O unit offers easy expansion
The USB-AD is a low-cost USB based multifunction I/O unit with 16 +/-5V 12bit analogue inputs, one +/-5V 12bit analogue output, four digital inputs and four digital outputs.
News from Audon Electronics ( 7 March 2008)
Platform suits demanding vibration testing
VibPilot allows alias-protected measurements in a frequency range up to 40kHz with more than a 120dB spurious-free dynamic range.
News from M+P International ( 7 March 2008)
Medical system spots air problems
The high sensitivity of Medbac helps to immediately detect a malfunction, such as an increase in unacceptable gasses or a loss of flow or pressure. Brochure Available
News from Beko Technologies ( 7 March 2008)
Safety system offers easy setup
SafetyEYE can deliver substantial cost savings through faster installation and set-up, as well as reduced maintenance requirements.
News from Pilz Automation Technology ( 7 March 2008)
Power distribution system handles short circuits
Murrelektronik's two-channel MICO allows users to design a more efficient and easy-to use MICO system. Brochure Available
News from Murrelektronik ( 7 March 2008)
Chains overcome application challenges
Renold has brought together all of its high-tech, problem solving chain products under the new banner of Solutions Products.
News from Renold Chain ( 7 March 2008)
Seals handle tough connections
SKF seals optimise productivity and reduce costs by excluding contaminants and retaining lubricants, as well as separating fluids and gases and withstanding differences in pressure. Brochure Available
News from SKF UK ( 7 March 2008)
Automation contract signed for fertiliser plant
ABB will provide engineering, procurement, supply of equipment and materials, construction, commissioning and start-up services, as well as overall project management for SQM's new plant.
News from ABB Automation Tech (Instrumentation + Automation) ( 7 March 2008)
Aluminium loadcells cut dynamic influence
The F325 web tension loadcell offers high-accuracy alignment aids, with a flat reference mounting foot or a alignment fitting fixing point.
News from Novatech Measurements ( 7 March 2008)
CNC slashes block cycle times
The 6000i combines Anilam's conversational Machinist's Language programming routines with G Code programming to create a CNC that is very user friendly
News from Anilam ( 7 March 2008)
Light curtain inspections ensure safety lasts
Technical Background Article ESPE certification involves an inspection to ensure that the light curtain cannot be defeated and that it is correctly positioned in relation to the mechanical hazards.
News from Pilz Automation Technology ( 7 March 2008)
Camera software provides interface upgrade
The speed of ActivVisionTools 3.2 has been significantly increased by using the SSE2 acceleration of the underlying Halcon 8.0 library.
News from MVTec Software ( 7 March 2008)
Study helps expand flight simulator use
Frazer-Nash carried out a detailed independent study of how simulators are currently regulated in the military and what the options might be for safely extending their use.
News from Frazer-Nash Consultancy ( 7 March 2008)
Hall-effect sensor resists fluctuations
The programmable Hall-effect technology used by Piher in the new PSC-360 is only sensitive to the flux density coplanar with the IC surface. Brochure Available
News from Piher International ( 7 March 2008)
Rugged encoders fit into tight spaces
High-resolution analogue-output encoders are ideal for high-reliability and high-precision industrial-automation and process-control applications. Brochure Available
News from Micronor ( 7 March 2008)
Website includes focus on electric vehicles
New web design includes animation and video footage to make the site clearer and more accessible, and enabling clarified focus on the unique advantages of Curtis technology.
News from Curtis Instruments (UK) ( 7 March 2008)
Mechanical CAD system comes up to date
VariCAD 2008 includes many new features and useful improvements.
News from Varicad ( 7 March 2008)
Catalogue covers next generation clutches/brakes
66-page catalogue covers new line of packaged electromagnetic clutches/brakes.
News from Warner Electric (Altra Industrial Motion) ( 7 March 2008)
Torque measurement aids machine efficiency
Technical Background Article Improved torque measurement capabilities on rotating machinery will provide great benefits to the many modern industries, claims Nick Cross of Datum Electronics.
News from Datum Electronics ( 7 March 2008)
Linear drives provide bakery productivity boost
User Application Article Two electrical linear drives with ball bearing guidance are used for the vertical movement and control of the lift table. Brochure Available
News from Hoerbiger-Origa ( 6 March 2008)
Software eases custom jobs for coal researcher
User Application Article Customers of Shanxi Coal Machinery Equipment are increasingly demanding personalised product designs, which are difficult with traditional 2D CAD.
News from PTC - Parametric Technology (UK) ( 6 March 2008)
Environmental repot urges behaviour change
As part of a route to a sustainable transport system, an integration of energy, pricing and planning policies are urgent, but top of that list is the need for societal change.
News from Institution of Mechanical Engineers ( 6 March 2008)
Huge gear ordered for Armenian project
User Application Article When manufacturing is complete David Brown's huge gear will be dismantled and shipped to its Armenian destination in four parts.
News from David Brown Engineering ( 6 March 2008)
Temperature sensor provides continuous records
The TFSS433D SAW temperature sensor is a 433.786MHz one-port SAW resonator structure designed to have a linear frequency versus temperature characteristic.
News from Vectron International ( 6 March 2008)
Small drive offers multipoint positioning
The SJ700 offers multipoint positioning and near servo performance from a standard induction motor.
News from Silverteam ( 6 March 2008)
Real-time analyser handles varied vibrations
The SO Analyzer's multiple tacho/frequency inputs feature, included in the standard software, offers a low-cost solution to those applications that need a simple spectral mapping capability
News from M+P International ( 6 March 2008)
Flowmeter handles challenging pipework
User Application Article The Minisonic system can be used on pipe diameters ranging from 10mm up to 3.3m (up to 10m on some systems) and is effective on most liquids, including those which are nonconductive.
News from Flowline ( 6 March 2008)
Fast emissions testing keeps vehicles on the road
Eminox' 19 approved examiners will allow the company to provide operators with a complete, one-stop LEZ compliance solution.
News from Eminox ( 6 March 2008)
Proximity sensors avoid "invisible pallet" problem
Pepperl+Fuchs' RL29-55V sensor uses foreground suppression to filter out false reflections when the reflecting target is too close to the sensor. Brochure Available
News from Pepperl+Fuchs GB ( 6 March 2008)
Camera system offers 16 optical channels
An optical periscope for focus adjustment enables rapid and simple experimental setup and optimisation.
News from Specialised Imaging ( 6 March 2008)
Terminal keeps production on schedule
If performance is falling behind, the Jazz Data Collection Terminal will provide visual feedback, allowing prompt action to avoid late delivery.
News from DLoG (UK) ( 6 March 2008)
High-grade springs meet aerospace needs
Springs manufactured by William Hughes are used in vital items of aerospace equipment including oxygen systems, access hatches and the solenoid valves used to control cabin pressure systems.
News from Hughes ( 6 March 2008)
Pocket guide keeps electrical data handy
The Electricians' Guide measures 16 x 11.5cm, making it easy for the electrician to carry in his or her pocket for quick reference when required.
News from Finder ( 6 March 2008)
MEMS flow sensors offer easier integratopm
The D6F-P has an integrated dust segregation system that uses symmetrical centrifugal flow paths to keep particulate matter away from the flow sensor element regardless of flow direction. Brochure Available
News from Omron Electronics ( 6 March 2008)
PTFE materials provide new properties
FTL Technology offers state-of-the-art technology in PTFE, including cost-effective injection moulded parts in PTFE, tubes and components in PFA, porous PTFE and PTFE foils and films. Brochure Available
News from FTL Seals Technology ( 6 March 2008)
Degree course to foster innovation and creativity
A new Master's degree in design aims to provide future leaders with an understanding of how to exploit creativity within technology organisations.
News from Cranfield University ( 6 March 2008)
Pipe tools pass educational examination
Professional pipe tools are ideal for all those taking plumbing and heating courses at school or college. Brochure Available
News from Pipe-Prep ( 6 March 2008)
Aluminium profile system can be ordered online
HepcoMotion has extended the scope of its e-shop to include its MCS profile system. Brochure Available
News from HepcoMotion ( 6 March 2008)
Cubic DAQ opens up new applications
Compact, rugged platform provides acquisition and control in automotive, aerospace, petroleum/refining, simulation, semiconductor manufacturing, medical, HVAC and power generation industries. Brochure Available
News from Adept Scientific ( 6 March 2008)
Catalogue has a new angle on sensors
Publication includes new Posirot magnetic angular sensors and a new Positilt magnetic inclination sensor.
News from ASM ( 6 March 2008)
Environmentally considerate lubricants in mining
Technical Background Article Frederic Farshchi explains how environmentally considerate lubricants can help to significantly reduce the impact of oil spillages in environmentally sensitive applications. Brochure Available
News from Shell Lubricants ( 6 March 2008)
Victory for global electrical engineering
Midlands switchgear manufacturer Craig and Derricott has been acquired by The Victory Group, a well-established Indian engineering company that manufactures products for the power industry.
News from Craig and Derricott ( 6 March 2008)
Affordable control for laser applications
Laser diode controller has the performance and features expected from instruments costing twice as much. Brochure Available
News from Lambda Photometrics ( 6 March 2008)
Plastics enable winning automotive concepts
User Application Article Award attests to the effectiveness of Sabic Innovative Plastics' strategy of working side-by-side with customers to help them deliver business success.
News from Sabic Innovative Plastics ( 6 March 2008)
Precision DRO offers low-cost solution
The Anilam Wizard 411 comes with DRO ENC 125 precision glass scales that boast a resolution of five microns and an accuracy rating of 10 microns/m
News from Anilam ( 5 March 2008)
Temperature controllers ease multi-zone monitoring
Eurotherm's RFS offers fast response times with single-point monitoring using the Modbus communication interface.
News from Eurotherm ( 5 March 2008)
Plastic glazing cuts concept car weight
User Application Article Through the use of Sabic Innovative Plastics' high-performance Lexan polycarbonate (PC) resin with Exatec coating, Land Rover was able to reduce each vehicle's overall weight by close to 19kg.
News from Sabic Innovative Plastics ( 5 March 2008)
Agreement provides laser sintering materials
3D Systems plans to collaborate with Trial to develop specialty materials and composites for its SLS technology, addressing the increasing specialty needs of the rapid manufacturing industry.
News from 3D Systems Europe ( 5 March 2008)
Twin-set sensor monitors piston position
The BIM-UNT is a universal magnetic field sensor that detects the position of a piston on standard pneumatic cylinders.
News from Turck ( 5 March 2008)
Packaging software smoothes product changeover
When using Rexroth's FlexProfile, a relationship can be established between motion segments on multiple axes to ensure that the pre-defined dependencies are retained when parameters are changed.
News from Bosch Rexroth - Linear Motion and Assembly ( 5 March 2008)
Colourant technology uses APE-free raw materials
CPS Color colourant systems suit the production of decorative paints, industrial coatings, leather finishes and coated fabrics.
News from CPS Color ( 5 March 2008)
Software cuts automotive testing times
User Application Article Trelleborgs' automotive customers are continually demanding shorter development times, but this allows less time to test components in long life applications.
News from nCode International ( 5 March 2008)
New facilities boost seal production
Trelleborg Sealing Solutions' new facility houses a newly equipped materials test laboratory and the UK research and development centre.
News from Trelleborg Sealing Solutions UK ( 5 March 2008)
Checkbox keeps testers calibrated
The Seaward PAT Checkbox is designed to check the accuracy of PAT testers and confirm that test readings remain valid during the period between formal re-calibrations. Brochure Available
News from Seaward Electronic ( 5 March 2008)
Lubricant guide offers energy saving help
Correct lubrication strategies improve reliability, can help avoid costly repairs and save energy, reducing harmful CO2 emissions.
News from Dow Corning ( 5 March 2008)
Cheaper UPS systems offer poor long-term option
The use of energy-efficient UPS reduces the consumption of electricity, which lowers energy costs for the end user while having a positive impact on the environment.
News from Frost and Sullivan ( 5 March 2008)
Electromagnetic software handles large simulations
PAM-CEM Solutions is able to mix both global and local approaches to electromagnetic simulation.
News from ESI Group ( 5 March 2008)
Hydraulic pumps provide precise control
Xvari 700bar pumps enables users to continuously and precisely control the amount of hydraulic oil flow in advance and retract mode.
News from Shaw Hydraulics ( 5 March 2008)
Compact motors incorporate quiet cooling
BandR's liquid-cooled three-phase synchronous motors feature high power density with compact outer dimensions.
News from B and R Industrial Automation Corp ( 5 March 2008)
Siemens practises what it preaches in JT adoption
User Application Article Company selected JT over all other relevant data formats after a comprehensive evaluation.
News from Siemens PLM Software ( 5 March 2008)
Drives and motors supported from end to end
Support for drive manufacturers now includes guaranteed installation, commissioning and repair of variable speed drives and motors.
News from Deritend Group ( 5 March 2008)
Thermoplastic pressure regulators won't leak
Regulators incorporate a novel rolling diaphragm seal, which isolates the spring chamber from the downstream pressure sensing liquid and assures sensitive, smooth, accurate performance.
News from Plast-O-Matic Valves ( 5 March 2008)
Machinery purchases upgrade pressworks business
A Robofil 6050 TW wire eroder and a Durr Ecoclean will help Brandauer to significantly increase throughput and achieve tight customer delivery deadlines.
News from Brandauer ( 4 March 2008)
Steel bearings don polyurethane protection
Polyurethane-coated nonmarking bearings reduce noise, improve traction and reduce wear on cam tracks.
News from Carter Manufacturing Co ( 4 March 2008)
Bearings work reliably at sub-zero temperatures
User Application Article Vending machines come in a wide variety of sizes as well as having a multitude of capabilities.
News from Micromech ( 4 March 2008)
Thermometers simplify complex measurements
The Fluke 566 and Fluke 568 Thermometers provide a broad temperature measurement range from -40 to +800C with 1% measurement accuracy. Brochure Available
News from Fluke (UK) ( 4 March 2008)
PLM software unifies 12 sites
User Application Article With Enovia SmarTeam, Pentair has cut product design cycles by as much as 50%, while maintaining secure and instantaneous data access across its global operations.
News from Dassault Systemes ( 4 March 2008)
Instrument upgrades ease belt configuration
A correctly aligned and tensioned belt drive or chain sprocket produces less friction and vibration in the drive system, which means less wear on belts, belt pulleys, bearings and seals. Brochure Available
News from Schaeffler (UK) ( 4 March 2008)
IR calibrators suit use by nonexperts
The 4180 series puts fast, portable and high-quality calibration within the reach of first time users, as well as experienced metrologists. Brochure Available
News from Fluke Precision Measurement ( 4 March 2008)
System provides Ethernet over old copper cables
Data rates from 192Kbit/s to 5.7Mbit/s in both directions over distances of up to 10km make the DDW-220 suitable for a broad range of applications.
News from Westermo Data Communications ( 4 March 2008)
UK companies struggle to fill IT posts
Professional development modules can be studied to suit a particular interest or job skill and can be a flexible, part-time, building block to a professional development qualification or degree.
News from Technology Innovation Centre ( 4 March 2008)
Position sensors guard oil platform stability
User Application Article Macro Sensors designs its high-pressure and seawater-resistant LVDTs from 316SS and Inconel 625 for pressure and corrosion resistance.
News from Macro Sensors ( 4 March 2008)
Online community eases CAD sharing
3D ContentCentral is free to registered engineers and designers, who use it to share 3D models and 2D drawings with other design teams, regardless of their CAD system.
News from SolidWorks Corporation ( 4 March 2008)
Gas supply service makes laser cutting economical
User Application Article Air Products can carry liquid gas at the required pressure so it can be transferred directly into the tank at any time of day, without causing any interruptions to the laser cutting application.
News from Air Products ( 4 March 2008)
Variable speed drives help cut wear on beet plant
User Application Article The Control Techniques drives give more than 180% start-up current to get the beet finisher drum started. Brochure Available
News from Control Techniques ( 4 March 2008)
Strain transmitter monitors dirty applications
The Type 9238A suits monitoring press fit, riveting and spot welding applications, where the force profile is indicative of the quality of the process, even in dirty and wet conditions.
News from Kistler Instruments ( 4 March 2008)
Robotics collaboration helps save lives
Surgical robots are now performing more than 50% of prostatectomies in the US, offering better patient while cutting costs.
News from Adept Technology ( 4 March 2008)
Monitors keep safety systems running
Turck safety monitors include a graphical user interface for commissioning and field diagnosis of the safety system.
News from Turck ( 4 March 2008)
Learn how to master LabView online
All three LabView Mastery courses feature an interactive, video-based approach to training with an emphasis on practical, applied learning.
News from Enable Training and Consulting ( 4 March 2008)
Get the inside story on pump selection
Newsletter aims to divulge the inside story of pump selection to give buyers confidence that they are being supplied the right pump to match their applications.
News from Robbins and Myers ( 4 March 2008)
Expanding M2M range increases datarates
Agreement will allow Amplicon to provide cellular hardware such as 3G routers and GPRS modems with SIM cards that have been extensively tested and are known to work together.
News from Amplicon ( 4 March 2008)
Desiccating agent comes in sheet form
Ensures an excellent level of clean drying in a wide variety of products from electronics, machinery, optics and instruments to pharmaceuticals and food. Brochure Available
News from Brownell ( 4 March 2008)
Temperature calibrator cuts insulation needs
The dual-zone heating block minimises the need to insulate sensors under test and makes it possible to calibrate liquid-filled and other mechanical sensors.
News from Ametek Calibration Instruments ( 3 March 2008)
Wiring system simplifies refrigeration project
User Application Article Greencold's was able to use a single panel to control a three-zone commercial refrigeration system, reducing the wiring cost and complexity.
News from Moeller Electric ( 3 March 2008)
High-sensitivity camera handles near-IR light
The VC4067 EXview Smart Camera executes even complex image processing routines, rendering additional PCs unnecessary.
News from Vision Components ( 3 March 2008)
Temperature sensor autocalibrates gain and offset
At power on the unit auto-calibrates the gain and offset and 1000V channel-to-channel isolation provides reliable protection in harsh environments.
News from Data Translation ( 3 March 2008)
Tough films suit portable electronics use
Lexan DMX films offer a pencil hardness rating of 1H, easy formability, high impact resistance and fabrication ease for insert mould decoration (IMD) graphics.
News from Sabic Innovative Plastics ( 3 March 2008)
Suction systems clear challenging substances
Ringler suction extraction devices can remove metal chip cuttings, including very hot materials, together with granulate, gravel, sludge, water, coolant and oils.
News from Buttkereit ( 3 March 2008)
High-power motors offer quiet operation
Total Motion Systems' (TMS) DC stepping motors cover holding torques from 0.25 to 15.0Nm and the largest motors can deliver up to 1kW of shaft power.
News from Total Motion Systems ( 3 March 2008)
Gantry system handles tough positioning jobs
The AGS series gantry is a H frame design based on linear motion guide bearings and direct drive linear servomotors with high-resolution linear scale encoder feedback. Brochure Available
News from Aerotech ( 3 March 2008)
Automated O-ring installation avoids RSI
Both the AGP-6-OR and AGP-8-OR O-ring installation tools are designed to facilitate part ejection and part seating and are suitable for applications where an ejector is needed after part placement.
News from AGI - American Grippers ( 3 March 2008)
Socket testers spot dangerous earth problems
Electrical installations need to be regularly checked to ensure they remain safe, according to the Health and Safety Executive (HSE).
News from Martindale Electric Company ( 3 March 2008)
High-speed control system wins innovation award
The Vipa System 300S control system uses Speed7 technology and is programmable using Step7 from Siemens. Brochure Available
News from Vipa UK ( 3 March 2008)
Training boosts safety in explosive environments
The UKAS-accredited Repair and Overhaul of Explosive Atmosphere Equipment training courses meet the BS IEC 60079-19:2007 standard, which comes into effect fully in May 2010.
News from Anstee Ware Group ( 3 March 2008)
Forming technology eases mass production
PEF users can cheaply create parts which are exceptionally accurate and free from stresses and burrs.
News from Tecan ( 3 March 2008)
Load bank suits testing wide engine range
Cressall Resistors' DC7000 load bank consists of twin, 14-section, fan-cooled resistor ducts with starters and controls and an integrated off-load switch panel.
News from Cressall Resistors ( 3 March 2008)
MultiCAD update eases model comparisons
EnSuite Version 2 users can isolate a part from a complex assembly by making the rest of the assembly transparent.
News from CADCAM-E.COM (CCE) ( 3 March 2008)
Apprenticeships develop employee skills
The Commercial Management Training Programme lasts for two years and allows candidates to spend time in all of the main areas of the company's business. Brochure Available
News from Eriks UK ( 3 March 2008)
Sealing compound operates to extremes
Recommended wherever conditions of temperature and pressure at smooth, plane sealing surfaces make extreme demands on the quality of the sealing compound.
News from Project Sales Corp ( 3 March 2008)
Ethernet connector is quick to mate in the field
New RJ45 connector can reduce Ethernet wiring time by as much as 80%, which can contribute to lower overall operational costs.
News from Wago Corp ( 3 March 2008)
Calibration services extend to third-party kit
Laboratory can calibrate pressure transducers and gauges up to 120MPa (1200bar) in gauge and absolute modes.
News from Kistler Instruments ( 3 March 2008)
Levers clamp in a confined space
Adjustable levers feature a straight zinc-die cast handle profile, which is parallel to the clamping surface.
News from Winco ( 3 March 2008)
Three-way joints are rigid alternative
Providing backlash-free axial rigidity but allowing radial and angular freedom of movement, the SRJ range offers a very compact alternative to combining traditional roller bearings.
News from Heason Technology ( 3 March 2008)
Miniature drive puts intelligence inside
Despite its small dimensions, the PIM2401 incorporates a digital drive, a powerful motion controller and PLC functions in the same unit.
News from Technosoft ( 3 March 2008)
Aluminium hinges promote a smart image
Especially suited to installations of cabinets, panel doors, inspection panels and wall boxes that will be on long-term display. Brochure Available
News from Elesa (UK) ( 3 March 2008)
Stereolithography resin is as clear as glass
Colourless RenShape SL 7870 delivers prototype parts with excellent impact resistance - higher than that of other clear SL resins currently available.
News from Huntsman Advanced Materials ( 3 March 2008)
Safety and automation business to be sold
Rockwell Automation to acquire products, technology, development engineering, marketing, sales and distribution.
News from Cedes ( 3 March 2008)
Wallace and Gromit help kids to think green
A new competition will encourage Britain's youngest inventors to think green when coming up with new ideas.
News from UK Intellectual Property Office (UK-IPO) ( 3 March 2008)
Black-box approach to process timing
Timer has a relay output to control pumps, solenoids etc, and a loud piezo-buzzer and flashing LED alert the user when the time has elapsed.
News from Gizmo Engineering ( 3 March 2008)
Total number of news releases published during the week: 111
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000

