News releases on Engineeringtalk categorised by date
Sunday 30 March
to Saturday 5 April 2008
Moving forward as Eriks UK
Eriks UK has become the new name for the organisation formerly known as Wyko Industrial Services in the UK. Brochure Available
News from Eriks UK ( 4 April 2008)
Wireless encoder interface for real-time control
SwiftComm was designed from the ground up for motion control applications, providing an extremely robust wireless signal in real time over a secure network.
News from BEI Industrial Encoder Division ( 4 April 2008)
Torque screwdrivers use quality brushless motors
Five different styles of the brushless electric screwdrivers provide manufacturers with flexibility and the ability to select the proper tool for any application.
News from Mountz ( 4 April 2008)
One belt answers all conveyor demands
A novel four-in-one belt can not only transport loads up to 1200kg but can replace all four systems used in the conveyor assembly - the flat belt, round belt, chain and timing belt.
News from Hutchinson Transmission ( 4 April 2008)
Shaft guidance systems explained in detail
A free, 175-page reference guide covers shaft guidance systems, including linear bearings, shaft support blocks, rail guidance units and housing units. Brochure Available
News from Schaeffler (UK) ( 4 April 2008)
Industrial-strength relay plugs in to save power
The Tyco XT interface plug-in relay is reckoned to be one of the best power saving plug-in relays of its type.
News from Dalroad Norslo ( 4 April 2008)
Uptime a powerful case for split roller bearings
Technical Background Article Split roller bearings mean that bearing failures can be rectified quickly, saving thousands in downtime costs, says Adrian Menzies of Revolvo. Brochure Available
News from Revolvo ( 4 April 2008)
Software gets in STEP with CAD data
STEPcenter supports a bidirectional process of retrieving CAD data from a PLM system, uploading it to an archival system, and vice versa.
News from TranscenData Europe ( 4 April 2008)
Fuel cell controller for automotive applications
Bespoke ECU for the control of hydrogen fuel cells is suitable for volume production, with potential for a price around GBP 250 per unit.
News from Prodrive ( 4 April 2008)
UPS systems are tailored to industrial tasks
Socomec has designed a range of UPS solutions by focusing specifically on the industrial applications that they are intended to supply.
News from Socomec Sicon UPS ( 4 April 2008)
Conduit and cable management for hazardous areas
24-page publication gives in-depth technical and ordering information for a full range of ATEX and IECEx approved metallic and nonmetallic conduit systems and accessories. Brochure Available
News from Kopex International ( 4 April 2008)
Laser sensor reflects on increased range
New laser sensors allow industrial automation and OEM production companies to more accurately measure and monitor a variety of object parameters. Brochure Available
News from Micro-Epsilon UK ( 4 April 2008)
Expansion for Didcot instrumentation factory
Move to the new premises was essential to allow growth and comes in advance of the launch of a new range of ABB Aztec branded products.
News from ABB Automation Tech (Instrumentation + Automation) ( 4 April 2008)
Condition monitoring maintains nuclear generation
User Application Article By installing an online condition monitoring system, nuclear power provider E.ON Kernkraft has eliminated costly plant downtime and kept plant availability above 90%. Brochure Available
News from Schaeffler (UK) ( 4 April 2008)
Batteries provide power for space station link
User Application Article Saft primary lithium and Ni-Cd rechargeable batteries provide power to the Jules Verne automated transfer vehicle, which has successfully docked with the International Space Station. Brochure Available
News from Saft Batteries ( 4 April 2008)
Electric lock is safe and secure
Compact heavy-duty bolt-lock is suitable for fail-safe or fail-secure applications and is equipped with a manual override.
News from Magnet Schultz ( 4 April 2008)
Automation technology seminars are free to attend
Seminars will include sessions that cover subjects such as machine safety, 3D vision inspection, choice of control system and logistics automation. Brochure Available
News from Lenze ( 4 April 2008)
Expert software gives 3D data new purpose
Software helps engineers to efficiently create and manipulate faceted models for 3D printing, rapid prototyping, simulation, manufacturing and analysis.
News from DeskArtes ( 4 April 2008)
Reseller deal eases access to automation software
Programme establishes new distribution channels through which mature sales and service organisations can provide Matrikon's leading technology to their client base.
News from Industrial Technology Systems (ITS) ( 4 April 2008)
Instrumentation is key to quality air supply
Beko offers a full line of compressed air instrumentation, from leak detectors and flow meters to dewpoint meters and minimum pressure valves. Brochure Available
News from Beko Technologies ( 4 April 2008)
Automated gas monitor works around the clock
The Automatic Extraction Monitoring System (AEMS) monitor is capable of autopurging and calibrating itself.
News from Geotech ( 3 April 2008)
Fieldbus system works on standard Ethernet
RTFL Safety Net p provides real-time communication in highly dynamic applications where a guaranteed scan time of 62.5us or less is required.
News from Pilz Automation Technology ( 3 April 2008)
Report highlights GigE Vision flaws
A new report warns that GigE Vision systems may not deliver all of the benefits and performance enhancements that designers expect.
News from Sony Europe - Image Sensing Solutions ( 3 April 2008)
50 models added to thermocouple/sensor range
The TMPRT001 surface mount sensor withstands high-vibration environments and the TMPRTOO2 pipe plug RTD sensor delivers reliable operation in pressure vessel applications.
News from Red Lion Controls ( 3 April 2008)
Ultrasonic system cuts energy waste
The Ultraprobe 3000 has been designed to promote quick, easy energy surveys with accurate results, helping to reduce a plant's carbon footprint. Brochure Available
News from Alpine Components ( 3 April 2008)
Software checks standards compliance during design
Instantly detecting and eliminating geometry, structure or methods errors, Q-Checker checks compatibility with downstream processes, ensuring models fit the needs of the entire manufacturing process.
News from Applied PLM Solutions ( 3 April 2008)
Document software smoothes nozzle development
User Application Article Task Force Tips is a worldwide leader in providing firefighters with nozzles that constantly adjust to the varying pressures of the water hose line.
News from Synergis Software ( 3 April 2008)
Bucket replacement system boosts speed and safety
User Application Article Using the Slide Sledge, a task such as pin removal on an excavator bucket is a simple one-man operation.
News from Damar International ( 3 April 2008)
Sensor relay responds to environmental changes
The relays can be controlled directly via any computer or network management system on the same network using the included SNMP command line utilities.
News from AKCP ( 3 April 2008)
System keeps sewage pump impellers working
User Application Article When the PLC within the Unidrive SP recognises a change in the pump preset torque profile, it initiates a set of procedures designed to clear the impeller. Brochure Available
News from Control Techniques ( 3 April 2008)
Y bearings handle large temperature ranges
The VA228 bearings feature a specially developed coronet cage, constructed from graphite materials, which effectively act as the lubricant for extended periods of operation. Brochure Available
News from SKF UK ( 3 April 2008)
Laser distance sensor tolerates bright light
The sensor has a robust diecast housing that measures 42 x 45 x 52mm and provides the user with two selectable switchpoints, or a single switched output combined with a scalable analogue signal. Brochure Available
News from IFM Electronic ( 3 April 2008)
Racking acquisition provides access to new markets
Mechan have bought Staffordshire-based Nirvana Engineering, a company that manufactures racking for the reserve battery power industry.
News from Mechan Controls ( 3 April 2008)
Digital micrometer provides measuring speed boost
The QuantuMike combines a precision 2mm-pitch leadscrew with a high-resolution electromagnetic induction rotary encoder to increase adjustment speed by up to four times. Brochure Available
News from Mitutoyo (UK) ( 3 April 2008)
Software speeds the creation of illustrations
QuadriSpace 2008 features a new task-oriented user interface for creating product documents from 3D design information.
News from QuadriSpace ( 3 April 2008)
Interface enhances flowmeter accuracy
The Cox 4080 is an ideal signal processing solution for turbine flowmeters used in aerospace, automotive, and test and measurement applications.
News from Cox Instruments ( 3 April 2008)
Antiseize paste makes the grade for food machinery
Ideal for lubricating sliding surfaces and friction contacts exposed to heavy loads, especially at low to medium speeds.
News from Dow Corning ( 3 April 2008)
HMI offers customised alarms for OEMs
Fully configurable alarm manager allows alarm pages to comply with given colour usage by an end user or a manufacturer.
News from Copa-Data UK ( 3 April 2008)
Low-current servo enables smaller systems
The 34L-1 is an economical solution for motion control applications including semiconductor, packaging, medical and food processing.
News from QuickSilver Controls ( 3 April 2008)
Desktop modeller promises new era of rapid design
The V-Flash desktop modeller transforms designs into solid plastic models that can be used for demonstration, testing and verification the same day.
News from 3D Systems Europe ( 3 April 2008)
MultiCAD software gains Catia V5 R18 support
The ability of EnSuite to support latest versions of all the CAD systems makes it possible for users to work with multiCAD and multiversion files from customers, vendors and partners
News from CCE ( 2 April 2008)
Enclosures protect sensitive electronics
The top-mounted 152mm pagoda fan efficiently exhausts hot air from the top of the cabinet for increased internal airflow and heat dissipation, while the filter keeps dust out.
News from Hoffman ( 2 April 2008)
High-strength glass suits high-volume applications
S-1 Glass bridges the gap between E-Glass and higher performance glass such as S-2 Glass fibres.
News from AGY ( 2 April 2008)
Composites software eases design process
One of the most significant new features in fibreSIM 5.4 is its integration with MSC.Software's SimXpert finite element analysis (FEA) software.
News from Vistagy ( 2 April 2008)
Metal company upgrades premises and website
Thin Metal Parts' (TMP) new premises allow it to expand its product offering, as well as services and capabilities.
News from Thin Metal Parts ( 2 April 2008)
Ethernet switches survive harsh environments
Amplicon Networking Essentials Ethernet switches suit cost-sensitive markets such as building automation and IP CCTV.
News from Amplicon ( 2 April 2008)
Open conveyor belt speeds product heating/cooling
CompactGrid has five times less resistance to flow-through than most plastic modular belts.
News from Wire Belt Company of America ( 2 April 2008)
Merger combines flow and pneumatics expertise
The Asco Numatics product line in North America consists of more than 50,000 valves, an extensive selection of air preparation equipment and a comprehensive set of position indicators. Brochure Available
News from Asco Numatics ( 2 April 2008)
Safety device prevents wheel loosening
In the event that a nut should lose clamping force and start to rotate, the mechanism triggers pins which engage with slots in the stud to prevent further rotation.
News from VisiLok ( 2 April 2008)
Air monitor spots dangerous oil levels
In the majority of cases, some residual oil content in compressed air cannot be avoided, but it needs to be monitored to ensure recommended levels aren't exceeded. Brochure Available
News from Beko Technologies ( 2 April 2008)
Ceramic drive handles high acceleration
The PILine M-674 RodDrive consists of a rod-shaped runner moved and guided by PILine piezo linear motors pressed against it from two opposing sides. Brochure Available
News from Lambda Photometrics ( 2 April 2008)
Fanless PC handles graphics-intensive applications
The eBOX630-821-FL has excellent graphics performance, multiple I/O connections and dual Gigabit Ethernet ports.
News from Axiomtek ( 2 April 2008)
Vibration monitor safeguards employee hands
The HAVmeter is attached to any tool being used and monitors and records the worker's hand arm vibration exposure.
News from Reactec ( 2 April 2008)
AC drives power huge shiploader
User Application Article Control Techniques Australia was awarded the contract for the control of all variable speed AC motors on the Dalrymple Bay coal terminal's new shiploader. Brochure Available
News from Control Techniques ( 2 April 2008)
Gearboxes boost recycling efficiency
User Application Article Over 50 gearboxes from Nord Drivesystems drive the extensive materials handling system at a new materials recovery facility (MRF) operated by Nordic Recycling.
News from Nord Drivesystems ( 2 April 2008)
41m cylinders handle materials handling duties
Control of the actuating force and operating speed is readily achieved by simple adjustments to the air supply. Brochure Available
News from Hoerbiger-Origa ( 2 April 2008)
New equipment makes Welsh mining economical
User Application Article The Celtic Miner 4500 uses two compact close-coupled planetary gearboxes and hydraulic motor units in its bespoke track drive system and another gearbox and motor to power its rotating cutting head.
News from Brevini ( 2 April 2008)
Software package gets users started with CAD
The IGE+XAO Group has released the launch of SEE Freedom an innovative offer for the Computer-Aided Design (CAD) market.
News from IGE+XAO UK ( 2 April 2008)
Extra-long cable eases dew point measurement
A precision PT100 is used to measure the dew point temperature with a standard accuracy of 0.2C and the resultant humidity level is displayed on the instrument front panel. Brochure Available
News from Michell Instruments ( 2 April 2008)
These boots are made for sealing
Catalogue and handbook covers a comprehensive line of moulded silicone rubber switch and potentiometer sealing boots rated to IP68.
News from APM Hexseal ( 2 April 2008)
Distributor targets Chinese simulation market
Alpha Precision Instrumentation Corp will distribute TracePro and Oslo in Taiwan and China.
News from Lambda Research Corporation ( 2 April 2008)
Digital prototypes short cut new aero engine
User Application Article Adept Airmotive used Autodesk Inventor to develop a 240kW general aviation engine with a compact design that offers low vibration levels and high structural integrity.
News from Autodesk ( 2 April 2008)
New name for motor specialist in the UK
Move reflects closer integration with the Italian MarelliMotori manufacturing plant.
News from Marelli UK ( 2 April 2008)
HMI eases remote process monitoring
The VTA-7570T uses an ultra low power AMD LX800 500MHz processor and a fanless design, which is a rugged HMI solution designed for limited space and heavy-duty environments.
News from Axiomtek ( 1 April 2008)
Threaded bolt flowmeter eases installation
SenGenuity's ViSmart viscosity sensor is designed to provide instantaneous sample and/or continuous, real-time, in-process viscosity measurements for embedded, in-line environments.
News from Vectron International ( 1 April 2008)
Mapping system quickly sizes up enclosed spaces
Spherical Beamforming provides a complete omnidirectional noise map and makes no assumptions about the nature of the acoustic environment.
News from Bruel and Kjaer UK ( 1 April 2008)
Step relay provides quiet lighting control
The 13.81 electronic step relay can be used in locations that have multiple entry points, or in large areas where a number of switching positions are required for the control of lighting.
News from Finder ( 1 April 2008)
Slim accelerometer survives drilling applications
The Mini-Q accelerometer uses the Q-Flex etched quartz proof flexible seismic system modified for harsh environments. Brochure Available
News from Inertial Aerosystems UK ( 1 April 2008)
Innovation centre helps UK companies compete
Two plumbing products manufacturers recently benefited from TIC's standards expertise.
News from Technology Innovation Centre ( 1 April 2008)
Welding course receives international recognition
Speciality Welds can now offer diver training schools a fully accredited self-teach programme, through its accreditation under EAL
News from Speciality Welds ( 1 April 2008)
Lubricants keep winches working at sea
User Application Article If the lubricant fails winch gears will suffer premature wear, fretting or corrosion, with the ultimate risk of winch failure. Brochure Available
News from Kluber Lubrication GB ( 1 April 2008)
Machine upgrade cuts lubrication costs
Bielomatik's latest single-channel MQL system delivers a fine aerosol spray directly to the cutting tip.
News from Bielomatik ( 1 April 2008)
High-speed camera avoids lost parcels
Using the VICAM-ssi2, operators can achieve read rates approaching 100% and identify dirty, damaged or marked codes, human-written address information and supplier numbers.
News from Vitronic ( 1 April 2008)
Rail system provides precise positioning
The Linear Rail System consists of a stationary base with a load bearing carriage that travels along a custom-extruded wear resistant aluminium rail.
News from Haydon Motion Europe ( 1 April 2008)
1GHz processor suits demanding applications
The RX3i CPU320 includes two built-in communication ports, configurable data and program memory. Brochure Available
News from GE Fanuc Intelligent Platforms UK ( 1 April 2008)
Industrial routers select fastest communication
Where HSDPA is not yet available the MR-250 will automatically fall back to 3G (UMTS) EDGE or GPRS to ensure it uses the fastest available communication.
News from Westermo Data Communications ( 1 April 2008)
CAD software helps keep waste disposal green
User Application Article Standing 1.27m tall and weighing 136kg, BigBelly uses only the sun's energy to compact and store five times the amount of garbage as receptacles of the same size.
News from SolidWorks Corporation ( 1 April 2008)
Panel PCs provide high-end graphics
BVM Afolux panel PCs support dual-screen displays, have a watchdog timer for automatic reboot and have an intelligent system management module to monitor internal temperatures and fan speeds.
News from BVM ( 1 April 2008)
Simple system prevents misfuelling
Using the existing fuel cap securing system the MPD has no moving parts and fits simply and quickly into the fuel filler neck, blocking any attempt to insert the thinner unleaded fuel nozzle.
News from DDN ( 1 April 2008)
Compressors help reduce environmental impact
A range of Boge's energy saving solutions will also be on display at AirTech 2008. Brochure Available
News from Boge Compressors ( 1 April 2008)
Website upgrade details inspection services.
Independent Integrity Inspection provides pasteuriser and heat exchanger inspection using the conductivity PCIS system.
News from Independent Integrity Inspection (INDEI) ( 1 April 2008)
Recycling advice aims to reduce electronic waste
Under new regulations, the impact of waste electrical and electronic equipment, (WEEE) on the environment must be minimised through re-use and recycling wherever feasible.
News from We3 Recycled ( 1 April 2008)
Analytical programs help protect public health
User Application Article Quality Analyst provides a powerful and flexible SPC charting and analysis solution, analysing data and presenting it simply with easy-to-understand graphics. Brochure Available
News from Adept Scientific ( 1 April 2008)
Novel latch has all options covered
Latch offers a combination of best in class features and performance coupled with considerably reduced weight and size while still providing a significant cost advantage.
News from Vehicle Security Systems ( 1 April 2008)
Relocation refines operating focus
Factored electrical products have been transferred to Cudis from the parent company Rowe Hankins which is to concentrate on the engineering of railway safety systems.
News from Rowe Hankins Components ( 1 April 2008)
Hygienic grease is safe for sensitive areas
Kluberfood NH1 87-703 Hygienic is a new special grease for use in aseptic cold filling applications. Brochure Available
News from Kluber Lubrication GB ( 1 April 2008)
Welding tools and accessories on CD
Products featured include a comprehensive selection of welding helmets and face masks from the highly sophisticated Eye-Tech range to basic handheld face shields. Brochure Available
News from ESAB ( 1 April 2008)
Torque transducer has a dual role
Sensor is well suited to low-volume testing in research, but is equally at home setting or checking torque values in production. Brochure Available
News from RDP Electronics ( 1 April 2008)
One-size-fits-all drive on the panel
StepNet AC drives incorporate command, encoder and communications interfaces that allow users to apply the single model to a wide range of stand-alone and networked applications.
News from Copley Controls Corp ( 1 April 2008)
Composite line to answer Asian demand
LNP Verton thermoplastic injection moulding compounds offer high strength and are an excellent metal-replacement option.
News from Sabic Innovative Plastics ( 1 April 2008)
New company specialises in precision machining
Continual investment in the latest milling, drilling and turning machinery enables Ramco to engineer complex and critical components and to fulfil large contracts with speed and accuracy.
News from Richard Alan Group (31 March 2008)
Battery partnership marks tenth anniversary
Nickel-cadmium cells can perform reliably for 20 years or more with minimal attention, a factor that can reduce lifecycle costs and benefit the environment
News from Industrial Batteries (UK) (31 March 2008)
Expanded tape range handles varied challenges
Filament tapes incorporate glass filaments and won't tear, even if the tape edge becomes damaged. Brochure Available
News from Anixter Components (31 March 2008)
Clamping knob is stainless option for food
Stainless-steel tri-lobe clamping knob suits food processing, marine, pharmaceutical, offshore and other aggressive environmental applications. Brochure Available
News from Elesa (UK) (31 March 2008)
Thermal drilling suits onsite use
Thermal drilling is suited for blind holes in tube, pipe and box sections of steel, stainless steel, aluminium, copper and brass
News from Flowdrill (UK) (31 March 2008)
Transmission improves comfort and reliability
The noise-optimised transmission allows smoother, more comfortable and easier handling, high shifting quality and flexibility. Brochure Available
News from ZF Great Britain (31 March 2008)
Reliable compressed air aids vehicle disposal
User Application Article An integral refrigerant dryer and screw compressor are neatly mounted on a horizontal compressed air receiver which keeps the space taken up by the SD20-RM750 to a minimum. Brochure Available
News from Boge Compressors (31 March 2008)
Watermarks guarantee plastic product authenticity
WMG at the University of Warwick has a watermarking process that suits products such as DVDs and other discs in the entertainment and computing markets.
News from University of Warwick (31 March 2008)
System cuts costs of decentralised automation
The FreeLine system integrates fieldbus, I/O and pilot valves for use in the most demanding process environments. Brochure Available
News from Burkert Fluid Control Systems (31 March 2008)
Stepper drives handle high-power applications
The NDC series of stepper drives offers ministepping, a built-in oscillator useful in simple move applications and operates from a DC power supply in the range of 24 to 75V DC.
News from Total Motion Systems (31 March 2008)
All-metal coupling allows easy installation
The Semiflex Standard F 230 provides 5kNm/rad of torsional stiffness, a length of 104mm and a radial misalignment capacity of up to 1.6mm.
News from Schmidt-Kupplung (31 March 2008)
Software conference focuses on best practices
The three-day conference will feature presentations by more than 50 customers and 16 technology partners on their use of simulation technology to accelerate product research and development.
News from Dassault Systemes (31 March 2008)
Sealant deal promotes Service Metals name
Purflex is a single-component, polyurethane sealer and adhesive formulated to meet a variety of needs within the vehicle construction and repair market.
News from Kommerling UK (31 March 2008)
Metal fatigue course points out common pitfalls
Safe Technology's Modern Metal Fatigue Analysis course is aimed design and test engineers responsible for product durability in the ground vehicle, aerospace and manufacturing industries.
News from Safe Technology (31 March 2008)
Catalogue brings families together
New complete catalogue from Alpha and Wittenstein replaces Alpha's previous system of blue binders and single-product loose catalogues.
News from Alpha Gear Drives (31 March 2008)
Sight glasses shed light on oil levels
Oil level sight glasses from JW Winco are highly stable and scratch proof.
News from Winco (31 March 2008)
Fasteners provide load-bearing threads
Floating self-clinching fasteners are designed for permanent installation in thin stainless-steel sheets.
News from PennEngineering (31 March 2008)
Industrial switches make redundant rings
Ring redundancy approach achieves high system availability, while simplifying the configuration and ease of operation of the network.
News from Harting (31 March 2008)
Panel PCs embed slimline control
CPU options range from AMD Geode LX 800s for dedicated applications up to Intel Celeron M 600MHz and 1.0GHz processors for enhanced applications.
News from MSC Tuttlingen (31 March 2008)
Cables set for offshore duties
User Application Article Bourbon Offshore has ordered 3146km of marine cables from Nexans for use in 54 new offshore supply vessels.
News from Nexans (31 March 2008)
Safety testing comes to the motor city
New lab at Livonia was built within Intertek's state-of-the-art performance testing lab to provide product safety testing.
News from Intertek (31 March 2008)
Conference explains concept of open innovation
Open innovation embodies the belief that by looking outside of their own boundaries, companies can gain better access to new ideas, knowledge, technology and markets.
News from Innovation Advisory Service (31 March 2008)
Total number of news releases published during the week: 112
News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000
