Visit the Schunk Intec web site

News releases on Engineeringtalk categorised by date

Sunday 6 April
to Saturday 12 April 2008

Generator cuts size of ultrasonic systems

The Primewave generator can precisely control the ramp up of power delivery so it can deliver a surge of power to jump start cavitation in viscous liquids.  Brochure Available 

News from Guyson International (11 April 2008)

Warning system improves x-ray safety

Each warning unit features an audible siren and three 60W rotating mirror beacons: green for x-ray ready, amber for x-ray imminent and red for x-ray on.

News from Shaw Inspection Systems (11 April 2008)

Fastener show draws near

The Fastening and Assembly Solutions Exhibition provides a free luncheon for all qualifying pre-registered visitors, as well as complimentary tea and coffee for all show visitors.

News from Fastener Fair (11 April 2008)

Mobile exhibition brings welding to the road

ESAB is taking to the road with its Demobus mobile exhibition centre to offer hands-on demonstrations of items from its wide range of welding and cutting products.  Brochure Available 

News from ESAB (11 April 2008)

Software chosen for motor sport suspension design

 User Application Article  LMS Virtual.Lab Motion has a special interface for building front and rear-axle suspension models, including flexible parts such as springs, bushing and dampers.  Brochure Available 

News from LMS International (11 April 2008)

Compressor works without oil

Quantima's Q-drive compression assembly has rotor and direct-driven compression elements that are levitated by active electromagnetic bearings to allow them to reach speeds of up to 60,000 rev/min.

News from CompAir UK (11 April 2008)

3D mice ease work in the field

Unlike traditional mice, which are confined to motion on a flat plane, 3Dconnexion's 3D mice allow effortless movement and control within 3D workspaces.

News from 3Dconnexion (11 April 2008)

Slimline servo drive cuts wiring costs

The Compax3M (C3M) servo drive integrates components such as mains filters and braking resistors into the drive system and helps reduce wiring.  Brochure Available 

News from Parker Hannifin Electromechanical Automation (11 April 2008)

Batteries power army modernisation

Saft will provide a high voltage, 4kWh battery as part of the energy storage subsystem for the FCS manned ground vehicles family.  Brochure Available 

News from Saft Lithium Battery Division (11 April 2008)

Turret nuts resist vibration

Steel double-slotted nuts are ideal for use wherever there is a continual or intermittent vibration that may potentially lead to a fastener loosening.  Brochure Available 

News from Alcoa Fastening Systems (11 April 2008)

Service finds jobs for unemployed engineers

i get it Engineering Jobs features search capabilities engineers will find useful when searching by company, geography, keywords and other preferences.

News from Tata Technologies iKS (11 April 2008)

Lenses suit TV and film industry

Resolve Optics has developed the industry's smallest 3:1 optical tracking zoom lens for use with three-chip broadcast cameras.  Brochure Available 

News from Resolve Optics (11 April 2008)

Software improves reliability of flood predictions

 User Application Article  The Scope software uses a combination of industry standard web technologies to provide client functionality within a standard web browser.

News from CSE Servelec (11 April 2008)

Exhaust ventilation guidance updated

An upcoming BOHS seminar provides a timely opportunity to improve understanding of exposure control and how LEV fits in, as well as a chance to see the new LEV guidance, directly from the HSE

News from British Occupational Hygiene Society (11 April 2008)

Small LED arrays suit motorsport use

BERU F1 Systems identified a robust LED that could provide the wide viewing angle that would allow officials at the side of the track to easily see the lights.

News from BERU F1 Systems (11 April 2008)

Flat cables provide installation flexibility

The Ecobus flat cable system is suitable for use in furniture, decorative, movable or stud walls, in the cavities of ready-built structures, risers, or suspended ceilings, or underneath cable liners.

News from Datwyler (UK) (11 April 2008)

Rail consultancy opens Scottish office

The Edinburgh office will provide Interfleet with a central strategic base from which to exploit opportunities in the region.

News from Interfleet Technology (11 April 2008)

Power line technology cuts street lighting costs

 User Application Article  Starsense uses Echelon's power line technology to reduce installation and deployment costs, turning the existing power lines running to each light pole into a reliable communications network.

News from Echelon (11 April 2008)

Web seminar to focus on composite analysis

Presentations will cover construction of finite element models with orthotropic materials, obtaining structural analysis solutions and the use of various tools for displaying results.

News from Noran Engineering (11 April 2008)

Handwheels provide comfortable adjustment

Handwheels are made from glass-fibre-reinforced polyamide shatterproof technopolymer with a through bore metal insert.

News from Ondrives/Rino Industries (11 April 2008)

Motor adds massage to electric beds

A massage motor is now available as an option on the Twindrive system from Linak.

News from Linak-UK (11 April 2008)

Pressure gauge makes a case for increased safety

Gauge is ideal for use in process, petrochemical and oil and gas industries, where operator safety is of paramount concern.

News from Winters Instruments (11 April 2008)

Electromechanical engineers go West

Local support for motor rewinds and mechanical repairs is now available in the West of England.

News from Rotamec (11 April 2008)

Enclosures provide protection for truck maker

 User Application Article  Computer Security and Solutions has developed a protective enclosure for a truck maker to house an industrial monitor, a thin client and a wireless connection.

News from Computer Security & Solutions (11 April 2008)

Versatile switches monitor varied substances

Thermatel TD2 switches have a spherical tip sensor and have passed the in-place cleanability testing according to the European Hygienic Engineering and Design Group procedures.  Brochure Available 

News from Magnetrol International (10 April 2008)

Rugged system eases detail work

The Duo system can measure the position of several LED targets simultaneously, providing an affordable system that can measure the position and orientation of the tetrahedron with speed and accuracy.

News from Metronor (10 April 2008)

Rapid prototyping handles large automotive jobs

 User Application Article  The Sinterstation Pro 230 SLS system transforms computer-aided design (CAD) data into ready-to-use, accurate and durable three-dimensional plastic parts.

News from 3D Systems Europe (10 April 2008)

High-strength chains handle earth moving challenge

 User Application Article  Varying the size of a chain's components in relationship to each other, even by the smallest amounts, can have a dramatic impact on the chain's performance.

News from Renold Chain (10 April 2008)

Torque tools ease engine quality control

 User Application Article  The ProWrench Opta electronic wrench is point of load insensitive, which means results will be reliable even when it is being used at odd angles.  Brochure Available 

News from Crane Electronics (10 April 2008)

Sensors monitor changing viscosity

An accurate and reliable real-time measurement of the mixing viscosity has often been a missing element in the process control loop.

News from Datum Electronics (10 April 2008)

Safety controller cuts costs for simple jobs

The Flexi Soft comes with a software configuration tool which allows safety engineers to configure complex safety systems - from simple logic gates to more advanced functions.

News from Sick (UK) (10 April 2008)

Corrosion-resistant valves keep power flowing

The valves in the power generation system will be protected against corrosion using Corrocoat's Corroglass 600 series flake glass filled coatings.

News from Corrocoat (10 April 2008)

Software acquisition leads to name change

The official launch of the Trubiquity brand will take place at two key international trade shows in April.

News from Trubiquity (10 April 2008)

Pressure sensor brochure covers tough environments

PCBO series 102A and 121A sensors offer intrinsic safety certifications to CSA and ATEX standards, permitting use on machinery operating in hazardous environments.

News from PCB Piezotronics (10 April 2008)

Servo drives provide scaleable solution

The new C3M servo drive family from Micromech offer considerable advantages for multiaxis applications in the 2 to 20kW power range.

News from Micromech (10 April 2008)

CAD downloads provide business boost

 User Application Article  In August 2007 AME added CAD downloads to its website to meet its customers' requests for online CAD drawings of its products.

News from Catalog Data Solutions (CDS) (10 April 2008)

Lubricant change cuts energy use by 17.3%

 User Application Article  By converting over to the NSF H1 registered Klubersynth UH1 6-220 the brewery meets its food grade compliance policy and oil drain intervals can be extended to at least five years.  Brochure Available 

News from Kluber Lubrication GB (10 April 2008)

Motor incorporated into motion control systems

The Reliance Cool Motion Slide is available in lengths up to 1.4m and combines the high speed and linear accuracy of a screw-driven slide with the intelligence of a integrated motor.

News from Reliance Precision Mechatronics (10 April 2008)

Shower design work wins award

 User Application Article  The only constraint imposed on PDD was that the shower's design, while needing to be progressive, would need to be consistent with Aqualisa's brand values and other products.

News from PDD (10 April 2008)

Braking resistor designs and applications

 Technical Background Article  Depending on the application, the addition of a braking resistor to a motor drive system can play a variety of roles, from enhancing safety to reducing mechanical stresses.  Brochure Available 

News from REO (UK) (10 April 2008)

Sonar imaging system measures in 3D

Aimed at the ROV market, Eclipse is ideally suited to all but the smallest subsea vehicles.

News from SRD (10 April 2008)

Conversion utility is free to download

A handy engineering units conversion utility can be downloaded free of charge from the Process Instruments website.

News from Process Instruments (UK) (10 April 2008)

Software puts PAT data on corporate databases

Program integrates everything from downloading full test records, report and certificate printing, to e-mail alerts for planning retests and uploading test criteria into PAT testers.  Brochure Available 

News from Seaward Electronic (10 April 2008)

Linear actuators prove popular on gas turbines

Actuators made by Hutchinson and Dibley are used in the remote control of critical systems in naval propulsion systems, gas turbines and power stations.

News from Hutchinson and Dibley (10 April 2008)

Website eases automation purchases

The search tool has been improved and will help users find exactly what they need in the shortest possible time, whether their search is product-related or manufacturer-specific.

News from Routeco ( 9 April 2008)

Object sensors cut the costs of quality control

The dualis is a stand-alone unit with integrated lighting and it's constructed in a rugged diecast housing with an IP67 rating for use over a temperature range of -10 to +60C.  Brochure Available 

News from IFM Electronic ( 9 April 2008)

Software update provides Russian support

SpinFire Professional 8.3 features enhanced measurement capabilities and Vista compatibility, offering users a more thorough tool for digital design communications.

News from Actify ( 9 April 2008)

Versatile cameras allow 7000 configurations

The six Stingray versions feature progressive scan colour or monochrome CCD sensors, each available with resolutions from VGA to 2Mpixels.  Brochure Available 

News from Firstsight Vision ( 9 April 2008)

Pressure transducer survives rocket applications

The GT100 features a cleanable pressure cavity and a stainless steel diaphragm which can be replaced in the field as needed, renewing the sensor in a few minutes.

News from Stellar Technology ( 9 April 2008)

Catalogue simplifies shaft connections

Fairloc is designed to solve phasing, timing, positioning and frequent removal problems which conventional fastening methods, such as clamps, keyways, pins or set screws, cannot properly handle.

News from Stock Drive Products/Sterling Instrument ( 9 April 2008)

Lubricant change cuts energy bill by 20%

 User Application Article  After converting over to the NSF H1 registered Klubersynth UH1 6-220 the brewery now meets its food grade compliance policy on the bottling and canning lines.  Brochure Available 

News from Kluber Lubrication GB ( 9 April 2008)

Cable glands provide fast, secure connections

Lapp's Skintop cable glands allow a cable to be fixed, centred, hermetically sealed and completely strain-relieved in a single step.

News from Lapp ( 9 April 2008)

Position sensors provide 0.635um repeatability

GHSI 750 series position sensors are suitable for remote sensing applications in which AC power is not readily available to operate external signal conditioning.

News from Macro Sensors ( 9 April 2008)

Co-operation provides rugged modems

The 6000 series of modems includes the BT-6600 modem for business continuity, landline backup network connectivity, landline replacement, real-time video monitoring and remote/temporary offices.  Brochure Available 

News from Sixnet ( 9 April 2008)

Company makes technology acquisition

The MTL8000 I/O is deployed around the world by process system OEMs, system integrators and end users to solve their most demanding process control applications.  Brochure Available 

News from GE Fanuc Intelligent Platforms UK ( 9 April 2008)

Polymers handle hot drinking water

Thanks to its moulding properties, Zytel HTN offers designers opportunities for integrating the functions of several metal parts into a single moulded part.

News from DuPont (UK) ( 9 April 2008)

Industrial drives co-operate on large cement kiln

 User Application Article  Two ABB drives have an individual gear box which in turn drives a common girth gear that is attached to the kiln shell at Castle Cement's Padeswood works in north Wales.

News from ABB Automation Tech (Drives and Motors) ( 9 April 2008)

Maths software provides performance boost

O-Matrix performance now far exceeds typical interactive math environments and often rivals solutions implemented in traditional compiled languages such as C++ and Fortran.

News from Harmonic Software ( 9 April 2008)

Narrowband transceiver runs up to 1km

The TR1M can be powered from any supply between 4.5 and 16V, with a current consumption of 110mA for the transmitter (100mW output) and 27mA for the receiver.  Brochure Available 

News from Radiometrix ( 9 April 2008)

Circuit technology boosts RCD performance

 User Application Article  DeepStream's 3D shaped circuit technology overcomes historic constraints of product topology and the hostile electrical arcing environment.

News from DeepStream Technologies ( 9 April 2008)

Institute membership offered to graduates

Nebosh has announced that holders of the revamped Nebosh Environmental Diploma will be eligible for associate membership of the Institute of Environmental Management and Assessment (IEMA).

News from NEBOSH ( 9 April 2008)

Changes to the IEE PAT code explained

 Technical Background Article  Jim Wallace of Seaward highlights the main changes in the new IEE Code of Practice for portable appliance testing.  Brochure Available 

News from Seaward Electronic ( 9 April 2008)

Machine guarding standards - the top ten tips

This article presents ten things that machine specifiers and designers should know about machine guarding standards.  Brochure Available 

News from Procter Machine Guarding ( 9 April 2008)

Mighty Atom powers fanless tablet trio

Fanless tablet computers based on the new Intel Atom processor will save power in data collection applications.  Brochure Available 

News from Nexcom UK ( 9 April 2008)

Temperature sensors pass test for Far East

 User Application Article  Distributed temperature sensing systems for down-hole monitoring complete successful two-year evaluation period.

News from Lios Technology ( 8 April 2008)

Software deal enhances simulation

SimX can now provide a complete package of services ranging from consultancy on robotics and manufacturing, to simulation software and services.

News from SimX ( 8 April 2008)

Couplings handle 750,000Nm of torque

Clamping sets such as the KTR 400 are suitable for use on high-load drives when only the shaft and hub have to be connected.

News from KTR Couplings ( 8 April 2008)

Couplings suit explosive environments

KTR's Atex-certified couplings include the torsionally flexible Rotex, Poly-Norm and Poly jaw couplings in a range of designs.

News from KTR Couplings ( 8 April 2008)

Realistic simulation cuts design times

Using Abaqus for Catia V5, expert analysts can define and deploy approved analysis workflows for use across the enterprise.

News from Abaqus ( 8 April 2008)

Polymer suits tough flowmeter applications

 User Application Article  By choosing Victrex Peek polymer as a substitute for metal and fluoropolymers such as ECTFE, PFA, PVDF, Digmesa has been able to lower production costs and weight.

News from Victrex USA ( 8 April 2008)

Tough coating allows easy application

Klubertop TP 46-111 dries rapidly and once hardened it ensures good resistance to wear and chemicals, provides a low coefficient of friction with no stick-slip at low speeds.  Brochure Available 

News from Kluber Lubrication GB ( 8 April 2008)

Position sensor provides readings in milliseconds

The new Temposonics R-series SSI position sensor communicates position, speed and position difference measurements synchronously or asynchronously.

News from MTS Sensor Technologie ( 8 April 2008)

Conduit catalogue offers new options

The Adaptalok ATS one-piece conduit fitting uses a twin shot moulding process and significantly reduces installation times  Brochure Available 

News from Adaptaflex ( 8 April 2008)

CAD software helps monitor firefighters

 User Application Article  SolidWorks' intuitive interface enables domo engineers to spend more time on innovation because they can quickly present a few design options in 3D format.

News from SolidWorks Corporation ( 8 April 2008)

Positioner provides nanometre resolution

The nanoMIPOS400 CAP nanopositioner satisfies the high-precision demands of biology, medicine and laser technology applications.

News from Linos Photonics ( 8 April 2008)

Torque sensor helps simplify test beds

TorqSense is an in-line digital torque sensor which is easy to use, accurate and low in cost, making it suitable as the core of any motor test bed.  Brochure Available 

News from Sensor Technology ( 8 April 2008)

Actuators incorporate force sensors

The brushless servo design of the GSX series linear actuators allows them to be used in state-of-the art closed loop servo systems, where electronic control of positioning and velocity is required.  Brochure Available 

News from Inmoco ( 8 April 2008)

Welding power sources offer stability and control

The Murex Transmig industrial welding power sources use simple three-phase switch and tap technology to produce reliable performance for applications up to 400A.  Brochure Available 

News from Murex Welding Products ( 8 April 2008)

Cameras provide detailed thermal images

The ThermaCAM P660's contrast optimiser enables the user to view both the scanned object and its surroundings with the great clarity.  Brochure Available 

News from Flir Systems ( 8 April 2008)

Conferences explain Code of Practice changes

Seaward is hosting presentations on the IEE's new Code of Practice for the In-Service Inspection and Testing of Electrical Equipment at locations around the country over the rest of the year.  Brochure Available 

News from Seaward Electronic ( 8 April 2008)

Software eases Fieldbus management

The integration of the Pepperl+Fuchs Advanced Diagnostics Module (ADM) and Diagnostics Manager software into PRM R3.02 enables users to access a consolidated supervisory window within PRM R3.02.  Brochure Available 

News from Pepperl+Fuchs GB ( 8 April 2008)

Elastic belt enables efficient compressor design

The elastic Flexonic belt enables manufacturers to construct oil-free piston compressors that are more economical and lightweight and use only a small universal brush-type motor.

News from Hutchinson Transmission ( 8 April 2008)

Upgrade for batch feeding systems

New discharge feeders from the hoppers are of the electromagnetic vibrating type, replacing the screw conveyors previously used.

News from Robson Handling Technology ( 8 April 2008)

Ceramic rollers save on energy and materials

 User Application Article  Alumina-silicate material has excellent thermal properties which means flatness is maintained in ceramic thin tile kilns, resulting in a high-quality finish.

News from Morgan Advanced Ceramics ( 8 April 2008)

Container ships stay safe with bearing monitors

 User Application Article  Systems monitor the crank train bearings of large two-stroke diesel engines in real time, providing an early warning of bearing wear and avoiding catastrophic failures.  Brochure Available 

News from AMOT ( 8 April 2008)

Grease is made for automotive plastics

With the increasing use of plastics in vehicle design, Kluber has developed a special plastics-compatible high-temperature grease for the automotive industry.  Brochure Available 

News from Kluber Lubrication GB ( 8 April 2008)

Safety tester joins facilities group

The PHS Group has acquired Epsilon as part of its strategy to broaden its range of services.

News from Epsilon Test Services ( 8 April 2008)

Exhibition promote eastern opportunities

There has recently been a great deal of activity in eastern Europe, providing fastener and fixing companies with new opportunities.

News from Fastener Fair ( 7 April 2008)

Research centre tackles automotive challenges

The innovITS - Advance research and development centre will allow companies to develop, test and validate future transport technologies in a safe, highly controlled environment.

News from innovITS ( 7 April 2008)

Automation controllers offer seamless upgrades

The PACSystems RX7i addresses mid-to high-end applications, with large memory and bandwidth and distributed I/O to handle all major system requirements.  Brochure Available 

News from GE Fanuc Intelligent Platforms UK ( 7 April 2008)

Solid state company receives Chinese accolades

Hongfa has the only VDE-approved test laboratory in China and its products - available in the UK through Hawco Controls, are generally UL, CUR, VDE, TUV and CQC-approved.

News from Hawco ( 7 April 2008)

Laser scanning provides quick, accurate results

 User Application Article  The Laser Design WS-2030 high-speed, high-accuracy automated 3D laser scanning system dramatically reduces Schneider Electric's inspection time.

News from Laser Design ( 7 April 2008)

Wind power maintenance market grows in Europe

While the wind energy market is growing at a tremendous rate, the service market is struggling to keep pace, according to research by Frost and Sullivan.

News from Frost and Sullivan ( 7 April 2008)

Corrosion detector spots damage 3km down

 User Application Article  The Ring Pair Corrosion Monitor (RPCM) is a high-resolution pipeline corrosion monitor developed for deepwater, high-pressure, high-temperature applications.

News from Arc Energy Resources ( 7 April 2008)

Flame retardant objections were "procedural"

The European Court of Justice (ECJ) has provided that the EU RoHS exemption for Deca-BDE remains in place until 30th June 2008 to allow time for regulatory and marketplace adaptations.

News from BSEF ( 7 April 2008)

Demonstration train receives GBP100,000 upgrade

Marl LED lighting features lifetimes of 50-100,000 hours, compared to 4000 hours for halogen and 20,000 for fluorescent tubes.

News from Marl International ( 7 April 2008)

Compact positioning table cuts installation times

The integration of the slide guide and precision ballscrew eliminates complex precision adjustment, reducing installation time dramatically compared to assembling individual components.

News from Micromech ( 7 April 2008)

Variable frequency drives offer easy maintenance

Danfoss Drives VLT series Variable Frequency Drives improve ease of use by sharing a common platform with smaller Danfoss drives.

News from Danfoss Drives ( 7 April 2008)

Bearings cut friction and noise

The deep-groove ball bearings' low running noise is achieved with a new type of lubricant, which also minimises the bearing's starting torque even at low operating temperatures.

News from NKE Austria ( 7 April 2008)

Wire analyser speeds cable testing

Tough, portable and reliable, the Horizon II is designed for HiPot testing up to 1500V DC/1067V AC within the most demanding of production test environments.  Brochure Available 

News from Clare Instruments ( 7 April 2008)

Handle range comes in all shapes and sizes

A heavy-duty clamping handle range with nylon handles tightened by allen key has reinforced die-cast zinc inserts and is also available in various ratchet materials/threads.

News from Rencol Component Sourcing Solutions ( 7 April 2008)

Gear redesign boosts motor power

Wider gear teeth and heavier and harder-wearing bearings combine to produce a 20% improvement in output from a given footprint.

News from David Brown Engineering ( 7 April 2008)

Repair composite works through oil and moisture

Forms strong bonds to oily, wet and manually prepared metal substrates and has already been particularly successful within the power industry.

News from Belzona Polymerics ( 7 April 2008)

Battery balancer keeps charging on the level

Tests on go-kart batteries showed a 75% increase in battery performance when using the CEQ12 balancer.

News from Camden Electronics ( 7 April 2008)

Seminars explain industrial Ethernet integration

Aimed at OEMs, system integrators and end users, the seminars will feature a series of technology and application presentations as well as training and hands on practical demonstrations.

News from Westermo Data Communications ( 7 April 2008)

RP models help blind boy to see new home

 User Application Article  Nine-piece model is built on a 3D Systems SLS system with DuraForm PA plastic, a durable and functional nylon material that has excellent surface resolution.

News from 3D Systems Europe ( 7 April 2008)

Transmission belt handles anything up to 600kW

The Hutchinson Poly V belt can be used on a variety of applications ranging from compressors and lawn mowers to exercise bicycles and agricultural equipment.

News from Hutchinson Transmission ( 7 April 2008)

Pressure monitor gains increased range

Maintenance free module is suitable for monitoring pressure and flow in air and neutral gases.  Brochure Available 

News from Huba Control UK ( 7 April 2008)

Total number of news releases published during the week: 108

News releases from 2008 2007 2006 2005 2004 2003 2002 2001 2000

 

Send us a blank email now to get our free regular email newsletter from the Editor
Engineeringtalk news by product category
Engineeringtalk news by date
Engineeringtalk news by manufacturer
Engineeringtalk Home Page


 

Register for the FREE Engineeringtalk email newsletter now! News and more every issue. Click here for details.