Product category:
Machinery and Production Equipment
News Release from: Star Micronics GB | Subject: Star SV-32
Edited by the Engineeringtalk Editorial
Team on 27 June 2006
Sliding-head lathe slashes production
time
Mill-turning aerospace connectors using Star Micronics' Star SV-32 sliding-head lathe followed by a single shaping operation is getting Doughty Precision Engineering closer to one-hit manufacture
Stainless steel plug shells for aerospace connectors are traditionally produced by Doughty Precision Engineering (DPE) in three operations, one on a fixed-head lathe and two on a gear shaper Now the same component is machined 30 per cent faster on a twin-spindle Star SV-32 sliding-head lathe followed by a single shaping operation
This article was originally published on Engineeringtalk on 14 Jul 2000 at 8.00am (UK)
Related stories
Bar magazines boost lathe output
Two new bar magazines capable of increasing the productivity of an automatic turning machine by typically 10 percent have been introduced to Britain and Ireland by A and S Precision
Turned parts subcontractor turns to Star
Roger Innes of Inro says that he has based his company's rapid growth over the last three years mainly on the purchase of Japanese-built Star CNC lathes through A and S Precision
The time saving will not end there.
In the same way that DPE and Star initially developed a special hobbing attachment that transferred machining of the shell's ratchet teeth to the SV-32, the Nottingham-based subcontractor and the machine supplier are now working together on another attachment that will allow the slider to complete the remainder of the shaping, ie machining of the alignment teeth.
In other words, a part that used to require transfer from one of three fixed-head, three-axis bar lathes to one of five gear shapers for two additional operations, will in future come off the Star complete.
This will allow one operator to be deployed on different work, reducing still further the already substantially lowered cost of producing plug shells.
Said Peter Doughty, "Early sliders were able to reduce the original fixed-head, mill-turn cycle by only 20 seconds, so we could not justify the investment".
Further reading
Subcontractor opts to go CNC turning route
Established in Bristol in 1963, North Somerset Reproductions (NSR) has recently bought its first two CNC machines - Star lathes from A and S Precision Machine Tools
Full length bar magazine handles stock down to 2mm
Designed for feeding sliding-head and fixed-head automatic lathes, the new Turbo 2-16 from FMB Maschinenbau has been added to the lower end of the company's standard, full length bar magazine range
Ultimate in belt cleaning technology claimed
Ace Arc has recently been appointed as sole UK distributor for Dirt Whacker belt cleaning equipment, claimed as the ultimate in belt cleaning technology
In contrast, the 9-axis SV-32 has cut approximately one minute out of the mill-turning, which includes threading, boring, reaming, slotting and broaching.
This is because we get a lot of machining for free by working on a part in the counter spindle while simultaneously machining the next component at the main spindle.
"We have also got rid of one handling operation by incorporating on the lathe the cycle to shape the ratchet teeth".
"When we transfer alignment key shaping onto the Star later this year, we will eliminate inter-operation handling altogether." DPE will eventually use the Star, which is fed by an FMB Turbo bar magazine, to produce 10 sizes and varieties of 303, 304 and 316 stainless steel plug shell up to 32 mm diameter.
They account for 40 per cent of the total, as shells go up to 50 mm diameter.
Batch size is typically 5,000-off.
Mr Doughty intends to maximise his company's use of sliding-head technology, pointing out a number of benefits over fixed-head mill-turn centres.
One often-overlooked advantage is that a slider typically draws less than half the power of an equivalently sized fixed-headstock lathe, so are less costly to run, particularly with energy prices rising so fast.
The other main plus-point is the ability to reduce cycle times, as the ganged turning tools and powered tools are very close to the component, so have a shorter distance to travel.
For the same reason, accuracy is often better too.
As to his selection of Star for his first sliding-headstock lathe, Mr Doughty points to the machine's heavy, rigid structure, which lends itself to better accuracy and longevity over many years of 24-hour operation.
He has also been impressed with Star GB's back-up, in particular its assistance with programming while DPE was learning the technology, and the supplier's willingness to help develop the in-cycle shaping operations.
Founded in 1925 by Alan Doughty, Peter's grandfather, DPE is now part of the Nasmyth Group.
The company originally specialised in manufacturing diesel fuel injector parts for locomotive engines.
Aerospace connector contracts gradually took over and now account for all of the business.
Around 40 per cent of output goes to UK customers, with most of the remainder delivered to the USA.
Concluded Doughty, "During the mid 1990s, we were finding that repeated 'cost-down' requirements from aerospace customers were eroding margins to the point where jobs were becoming financially unviable".
"It became impossible to manufacture aerospace components economically without minimising the number of separate machining operations, so in 1997 we started down the fixed-head, twin-opposed-spindle, mill-turning route".
"Purchase of the Star sliding-head mill-turn centre, which has even more CNC axes, has been a logical extension of that policy and is getting us even closer to one-hit manufacture.".
• Star Micronics GB: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
