Product category:
Robotics, Handling and Storage
News Release from: ABB Robotics | Subject: IRB2400L
Edited by the Engineeringtalk Editorial
Team on 24 December 2003
Robot auditions for plant take-over
Aerospace component manufacturer Centrax has installed an ABB IRB2400L six-axis robot at its Newton Abbot site, to investigate the feasibility of introducing fully automated machine tending.
Aerospace component manufacturer Centrax has installed an ABB IRB2400L six-axis robot at its Newton Abbot site, to investigate the feasibility of introducing fully automated machine tending to selected manufacturing processes The ABB IRB2400L robot has already completed a lengthy initial trial period, during which it was employed within a mocked-up manufacturing cell, carrying out simulated machine tending in support of turbine aerofoil production
This article was originally published on Engineeringtalk on 18 Feb 2003 at 8.00am (UK)
Related stories
Robot is one "tough cookie"
The IRB 6600 is a high-precision, agile yet robust robot, specially designed for demanding process applications such as spot welding, materials handling and machine tending.
Robot automation boosts enclosure manufacture
Rittal-CSM has integrated robot-based automation across its welding cells at regular time intervals and now employs ABB six-axis robots in a wide range of applications.
Centrax operates over 100 CNC metal cutting machines and the project study was initiated to look at ways of automating some of the operations that link these machines together.
It is hoped that, in time, automated machine tending will increase productivity and reduce manufacturing costs, allowing the company to maintain competitiveness against low cost economies.
The company employed graduate student engineer Andrew Barrington on a two year secondment through the government sponsored Teaching Company Scheme, whose responsibilities included identifying machine tending operations that were the most suitable to automate.
This procedure took six months, in which a blade root manufacturing process that included machining, de-burring and dot marking was identified as the most suitable to trial.
After this, the Centrax project team, headed by electronics engineer Kevin Vickers, started the process of robot selection.
Further reading
Software provides offline control of welding
VirtualArc is a powerful software tool that gives robot welding engineers full "offline" control of the MIG/MAG process.
Software aids handheld control for robots
Handheld control for robots is taking a quantum leap forward with the development of a range of next generation application software devices, based on the Microsoft.NET Compact Framework.
Software speeds robotic programming
BendWizard computer software can be used to quickly and efficiently program robots for use in tending press brakes.
An initial "field" of eight manufacturers was rapidly whittled down to four, then to two, and eventually to one - ABB.
Vickers says: "The final choice was due, in no small part, to ABB's pro-active stance in working closely with us to find a suitable robotic solution.
Another significant factor towards the end of the selection process was the excellent package of standard software options and competitively priced extras available with ABB robots".
One such "extra" is RobotStudio, the first, easy-to-use software for the simulation and true offline programming of a robot system on a standard windows PC.
RobotStudio uses an exact replica of the real ABB robot controller and can generate precise robot programs.
Operators can watch a 3D simulation of robot movements, step-by-step, to see if the virtual robot is reaching all positions needed without costly collisions.
"When we first looked at simulation software we regarded it as a bit of a toy", adds Vickers.
"However, we quickly came to realise that accurately orientating a workpiece in a three dimensional environment is not that simple, and to plot a complete production cycle on a drawing board is extremely difficult, if not impossible".
"RobotStudio has great potential as an aid to the effective design and implementation of the production cell and appears to be 'head and shoulders' above the other robot maker's proprietary software that we have seen", according to Vickers.
"Third party software is priced way beyond our budget".
RobotStudio, in conjunction with ScreenViewer, has been used for the development of an operator interface for process management.
The process logic is handled by the robot controller, without the requirement for a separate programmable logic controller (PLC).
The ABB controller's ScreenViewer option allows the setup of operating parameters for a specific batch of work.
Thus, instead of following a fixed repetitive cycle, the robot will prioritise its actions according the state of these process parameters.
Trials will now advance to preproduction, with a second ABB robot providing "live" tending of machining, de-burring and dot marking operations within a controlled environment.
The first robot will continue to be used to evaluate other manufacturing processes that may benefit from automated machine tending.
During preproduction trials the ABB robot will tend three machines: a Mori Seiki vertical machining centre machining blade root forms; a deburring wheel carrying out post machining deburring, and a dot marker providing individual aerofoil identification.
Should preproduction trials go as planned, a permanent production installation is to be established on the shop floor. Request a free brochure from ABB Robotics ...
• ABB Robotics: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
