Product category:
Ballscrews, Linear Guides, Jacks, Dampers
News Release from: Abssac | Subject: Machine cut and whirled acme screws
Edited by the Engineeringtalk Editorial
Team on 08 February 2005
Acme screws go left and right
Abssac continues to expand its linear product range by branching out into the power screw market with a new range of machine cut and whirled acme screw formats.
Abssac continues to expand its linear product range by branching out into the power screw market with a new range of machine cut and whirled acme screw formats Supplying screw diameters from 10 up to 70mm as standard, Abssac can now supply diameters up to 200mm if required
This article was originally published on Engineeringtalk on 22 Feb 2000 at 8.00am (UK)
Related stories
New Antibacklash nut design for rolled Acme screws
The new XCT and XCF rolled screw nut designs use a revolutionary Cross Cam design called the Active Cam to eliminate backlash and maintain a high axial stiffness
With standard lengths up to 3000mm in aluminium, steels and stainless steels, the trapezoidal thread forms can be supplied in both right- and left-hand formats.
Complimenting the screws are a standard range of bronze or steel nuts, which can be easily adapted into special nut designs, where the fit tolerances between nut and screw can be guaranteed.
A full end machining service to the screws is also available, allowing Abssac to supply ready to fit linear solutions.
Abssac is tapping directly into the screw jack and power screw type applications with this product in product range, price and delivery.
All products are supplied with BS EN9001:2000 assurance. Request a free brochure from Abssac ...
• Abssac: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
