Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: Lenze-ACTech | Subject: MotionMatch
Edited by the Engineeringtalk Editorial
Team on 28 December 2007
Software sizes servo drives and motors
The combination of MotionMatch motor sizing software and MotionView drive configuration software offers a powerful yet simple solution to motion control management.
MotionMatch is a new sizing software package for servo drives and motors from Lenze-ACTech Company officials describe the combination of MotionMatch motor sizing software and MotionView drive configuration software as a powerful yet simple solution to motion control management
This article was originally published on Engineeringtalk on 28 Dec 2000 at 8.00am (UK)
Related stories
Wide range of sub-micro drives available from USA
USA drive manufacturer AC Technology has achieved the first major objective in its ambitious UK growth strategy by entering into an agreement with Exico for the distribution of its inverters
Single phase 220V inverter meets European needs
AC Technology, the largest manufacturer of small AC inverter drives in the USA, has designed a drive specifically for the European market, the SCL.
According to Darrow Hanesian, Director of Product Management at Lenze-ACTech: "Sising a motor shouldn't be rocket science and neither should programming a servo drive".
Hanesian reckons that Lenze -AC Tech's MotionMatch, used with the existing MotionView, takes all the guess work out of pairing a servo drive and a motor, plus the user can now configure the drive with infinite ease.
"Our application engineers often get asked about the right size motor for a customer's application; unfortunately, however, the question usually comes after some failure has occurred", says Hanesian.
Deb Kling, Lenze-ACTech Marketing Manager, agrees: "With thousands of drive and motor combinations to choose from, it is no wonder that customers get frustrated with the selection process; with MotionMatch, all you need to do is enter your application requirements and the program will return the compatible servo drive/motor combinations".
Hanesian and Kling say that Lenze-ACTech customers have been using MotionView to configure the PositionServo drive since the software's introduction in 2001.
"The success of MotionView lies in its intuitive Windows-based menu and the ability to fully program the drive from a PC", says Hanesian.
Kling calls the pairing of MotionMatch and MotionView "a marriage made in machine heaven". Request a free brochure from Lenze-ACTech ...
• Lenze-ACTech: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
