Product category:
Connectors, Terminals, Busbars and Slip Rings
News Release from: Aerco | Subject: Wago 726 matrix terminal blocks
Edited by the Engineeringtalk Editorial
Team on 02 November 2001
Matrix terminal blocks aimed at
trackside use
Aerco has introduced the 726 series from Wago, a new range of matrix terminal blocks that have been specially adapted for trackside applications in the railroad industry
Aerco, the Horsham based electromechanical component distributor, has introduced a new range of matrix terminal blocks that have been specially adapted for trackside applications in the railroad industry The 726 series from Wago is available in versions up to 32 pole and 32 contacts
This article was originally published on Engineeringtalk on 8 Feb 2001 at 8.00am (UK)
Related stories
LEDs replace standard incandescent lamps directly
Now available from Aerco are LED 'drop-in' lamps from EBT designed for direct replacement of all standard incandescent and neon lamps.
Terminal dimensions are 44 x 132 x 36.5mm and the terminals will accept wire sizes between 0.08 - 1.5mm2.
Other sizes are available on request.
Simple to configure, the conductors are terminated by a simple push-in method and do not use time consuming screw terminators.
They accept solid, stranded, flexible crimped or ferruled wires.
Each module is delivered pre-marked and groups of modules can be identified using special marker tiles supplied.
The 726 series is ideally suited for use in communications, alarms, signalling and building management system applications where there is a need to terminate large numbers of wires in a small area.
• Aerco: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
