Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: Applied Motion Technology | Subject: 2035XD
Edited by the Engineeringtalk Editorial
Team on 19 November 2002
Cost-effective two-axis stepper solution
The new two-axis stepper board from Applied Motion Technology is designed for applications such as pan and tilt, x-y tables or for use with joystick control.
The new two axis stepper board from Applied Motion Technology is designed for applications such as pan and tilt, x-y tables or for use with joystick control The 2035XD step motor drive is a two-axis software-configured step/direction or oscillator drive
This article was originally published on Engineeringtalk on 29 Mar 2002 at 8.00am (UK)
Related stories
Servos and steppers controlled with free software
Applied Motion Technology has launched its range of intelligent servo and stepper products by giving away the programming software.
These drives can be quickly and precisely configured using Applied Motions eXposition from a Windows PC.
When configured for pulse/direction mode, the two drives can be commanded by the step and direction signals available from many PLCs and step motor indexers.
In oscillator mode the two drives generate their own acceleration and deceleration profiles and are commanded by digital run/stop signals.
PLCs, mechanical switches, single board computers or other motion control devices can supply these signals.
Speeds may be fixed or can be set "on the fly" by 0 to 5V analogue signals.
This drive is suitable for sizes 11, 14, 17 and 23 stepper motors and can deliver up to 70W of power per axis.
• Applied Motion Technology: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
