Product category:
Proximity Sensors
News Release from: Active Switch and Sensor | Subject: RM1240
Edited by the Engineeringtalk Editorial
Team on 10 February 2005
Proximity switch offers choice of
contacts
The RM1240 proximity switch has an M10 threaded brass/nickel plated body and can be supplied with a Form A (normally open), or Form C (changeover) contact.
The RM1240 proximity switch from Active Switch and Sensor has an M10 threaded brass/nickel plated body and can be supplied with a Form A (normally open), or Form C (changeover) contact The normally open contact is rated at 300V AC, 0.5A, 10VA, and the changeover contact at 200V AC, 0.5A, 5W
Both switches have a 300mm cable for easy termination.
A magnet with the same size housing as the RM1240 switch can be supplied.
This enables easy adjustment of both the switch and magnet.
This switch is useful for a wide range of position sensing applications, especially for control and process applications.
• Active Switch and Sensor: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
