Latest news on Engineeringtalk categorised by supplier

Allegro MicroSystems Europe

Please note: More news from Allegro MicroSystems Europe on the Electronicstalk web site

Address:
Les Pleiades
Park Nord Annecy
Metz-Tessy
74370
France
Telephone: (France) +334 50512359

http://www.allegromicro.com

Our RSS feed for news from Allegro MicroSystems Europe

Request to receive our free email newsletter each week

 

Listing of all 44 news releases from Allegro MicroSystems Europe:

Hall-effect sensors come in miniature packages

The A1380 series provides users with the accuracy and flexibility of fully programmable linear devices without the penalty of a larger package and higher cost.

News from Allegro MicroSystems Europe (25 July 2007)

Hall-effect sensor paper planned

Allegro MicroSystems is planning to deliver a paper focussing on a new low-noise, high-bandwidth linear Hall-effect sensor for applications in current and position sensing.

News from Allegro MicroSystems Europe ( 8 May 2007)

Automotive sensors feature in Numemberg

Allegro MicroSystems Europe will feature new extensions to its families of Hall-effect sensors and subassemblies at the Sensor and Test 2006 exhibition in Nuremberg, Germany.

News from Allegro MicroSystems Europe (27 March 2006)

Sensor IC addresses automotive ABS applications

Hall-effect speed sensor incorporates running-mode calibration system to address the critical performance requirements found in two-wire automotive ABS and industrial speed-sensing applications.

News from Allegro MicroSystems Europe ( 6 March 2006)

Hall-effect sensors get their teeth into gearboxes

New back-biased Hall-effect IC sensors switch in response to magnetic signals created by ferrous targets in automotive or industrial gear-tooth sensing and proximity applications.

News from Allegro MicroSystems Europe (30 January 2006)

Hall sensor meets automotive needs

Hall-effect sensor module from Allegro is optimised to meet the requirements for speed and direction sensing in automotive transmission applications.

News from Allegro MicroSystems Europe ( 5 December 2005)

Gear-tooth sensors promise high reliability

A new family of AC-coupled Hall-effect gear-tooth sensors combine a compact package size with integrated filter capacitors to provide additional reliability.

News from Allegro MicroSystems Europe (17 October 2005)

Sensor gathers speed, position and timing data

The ATS616LSG from Allegro MicroSystems Europe is an analogue self-calibrating speed sensor designed for non-TPOS (true power on state) automotive camshaft applications.

News from Allegro MicroSystems Europe (30 August 2005)

Hall-effect switches have all options covered

Allegro MicroSystems Europe is expanding its family of successful chopper-stabilised Hall-effect switches and latches with four new product offerings.

News from Allegro MicroSystems Europe (25 July 2005)

Gear-tooth sensors boast wide-ranging accuracy

New gear-tooth sensors operate with true power-on state recognition, and include a self-calibrating feature in running mode to improve accuracy performance over a wide temperature and airgap range.

News from Allegro MicroSystems Europe (30 May 2005)

Sensor suits automotive engine control

A novel zero-speed differential gear-tooth sensor is optimised to address the stringent requirements of automotive engine control, especially crank speed and position sensing.

News from Allegro MicroSystems Europe ( 5 April 2005)

Hall-effect sensor ICs offer field programmability

A new family of low-cost linear Hall-effect sensor ICs offer field programmability on the output pin.

News from Allegro MicroSystems Europe (21 March 2005)

Sensors aid automotive and industrial applications

Allegro MicroSystems Europe will be showing a number of major new developments in Hall-effect sensor technology for automotive and industrial applications at Sensor and Test 2005.

News from Allegro MicroSystems Europe (18 March 2005)

French centre focuses Hall-effect expertise

Allegro MicroSystems Europe has opened a European Sensor Applications Centre in Annecy, France, to provide technical support for Hall-effect sensors in the automotive and industrial sectors.

News from Allegro MicroSystems Europe (13 January 2005)

Speed sensor turns to automotive crankshafts

The A1425 is a high-accuracy analogue Hall-effect speed sensor IC with an integrated tracking capacitor and a dual zero-crossing output signal.

News from Allegro MicroSystems Europe ( 7 September 2004)

Linear Hall-effect sensors stay stable

The A132X family of highly sensitive, temperature-stable linear Hall-effect sensors provide a voltage output that is proportional to the applied magnetic field.

News from Allegro MicroSystems Europe (23 August 2004)

Speed and direction sensor aids ABS applications

The new Allegro MicroSystems ATS650LSH is a two-wire sensor module designed for wheel-speed and direction sensing in automotive ABS applications.

News from Allegro MicroSystems Europe (10 August 2004)

Sensor gets into gear

The ATS643LSH is a Hall-effect gear-tooth sensor module that is ideal for obtaining speed and duty-cycle information in automotive applications such as transmission speed sensing.

News from Allegro MicroSystems Europe (21 June 2004)

Hall-effect switches replace reed types

A new family of Hall-effect switch ICs can act as high-reliability replacements for reed switches in automotive and other demanding applications.

News from Allegro MicroSystems Europe ( 6 August 2003)

Sensor aims for automotive applications

The ATS645 is a differential Hall-effect gear-tooth sensor that can sense very small symmetrical tooth geometries with high reliability in applications such as automotive ABS and transmission systems.

News from Allegro MicroSystems Europe (11 June 2003)

Package provides integrated Hall-effect solution

Miniature inverters aim for white goods

High accuracy for gear-tooth sensor

Gear-tooth sensor runs down to zero speed

Hall-effect sensor gets to the teeth of gearing

New Applications Manager at electronics specialist

Stepper-motor driver IC offers built-in translator

Hall-effect sensors win Engineering Award

DMOS full-bridge PWM motor driver IC launched

Offline quasi-resonant flyback switching regulator

Accurate large-pitch target tooth-edge detection

Multi-mode offline switch-mode power-supply IC

3-phase brushless DC motor MOSFET controller IC

Hall-effect gear-tooth sensor for two-wire use

High current from microstepping motor drivers

Zero-speed, Hall-effect adaptive gear-tooth sensor

Programmable chopper-stabilised Hall-effect sensor

Proximity module ideal seat-position sensing

Blue light-emitting diodes available from Allegro

Ultra-stable Hall-effect switch ICs introduced

Integrated switching regulators cut PSU cost

Hall-effect switch IC ideal for direction sensing

Motor driver kit with stepper control ICs

New Hall-effect switch for low-power applications

 

Send us a blank email now to get our free regular email newsletter from the Editor
Engineeringtalk news by product category
Engineeringtalk news by date
Engineeringtalk news by manufacturer
Engineeringtalk Home Page


 

Register for the FREE Engineeringtalk email newsletter now! News about Rotary Position, Tilt and Angular Sensors and more every issue. Click here for details.