Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: AllMotion | Subject: EZStepper
Edited by the Engineeringtalk Editorial
Team on 15 October 2007
Stepper motor offers easy automation
The EZStepper stepper motor controller and driver combination is designed to be bolted onto the back of the stepper motors that it controls.
The EZStepper was designed to allow the rapid implementation of stepper motor solutions in products requiring automation The 57 x 57mm intelligent stepper motor controller and driver combination is designed to be bolted onto the back of the stepper motors that it controls
This article was originally published on Engineeringtalk on 6 May 2005 at 8.00am (UK)
Related stories
Small claims for DC servo driver and controller
The EZSV10 DC brush servo driver is billed as the smallest fully programmable DC servo driver and controller on the market.
A single four-wire bus, containing two power wires and two communications wires, links up to 16 such stepper motor controllers in a daisy chain.
Commands can be issued from any serial terminal program (such as HyperTerminal) or from the EZ Stepper Windows application.
The commands are intuitive and simple.
The A10000 command, for example will move the stepper motor to absolute position 10000.
The EZ Stepper is also capable of standalone operation with no connection to a PC.
It can be set to execute a preset string of commands upon power up.
The EZHR23ENHC stepper motor controller will work with any stepper motor that is 127mm in diameter or smaller .
Starter kits enable a first time user to make a stepper motor move intelligently in less than half an hour.
• AllMotion: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
