Product category:
Gauges, Indicators and Instruments
News Release from: Amalgamated Instrument Co | Subject: LED displays
Edited by the Engineeringtalk Editorial
Team on 09 September 2004
High visibility for wall-mount LED
displays
Amalgamated Instrument Co (AIC) has enhanced its range of large digit displays with the release of four-, five- and six-digit numeric LED displays housed in wall-mount IP65 enclosures.
Amalgamated Instrument Co (AIC) has enhanced its range of large digit displays with the release of four-, five- and six-digit numeric LED displays housed in wall-mount IP65 enclosures The four-digit display has digits of 57mm high with a visibility rating of 25m
This article was originally published on Engineeringtalk on 27 Apr 2004 at 8.00am (UK)
Related stories
Large-digit displays blaze the way
A new range of 200mm LED displays are ideal for wide coverage applications.
Load/force/pressure meter now comes with RS232
The Amalgamated Instrument Co HH4-WT hand held load/force/pressure meter now has RS232 communications as standard and can hold up to 3 sets of calibration data within its own memory
Liquid level transducers fully submersible
The KPSI range of submersible liquid level transducers have been specifically designed to meet the rigorous environments encountered in liquid level measurement and control
The five-digit version has 45mm-high digits with a visibility rating of 20m.
The six-digit display has digits of 38mm high with a visibility rating of 18m.
The displays are manufactured using ultrabright LEDs and they feature an "autobrightness" function that automatically adjusts the display level to the ambient light conditions.
This eliminates the "display dazzle" that can occur in low ambient light but allows the display to be seen in daylight.
The wall mounted enclosures are manufactured from UV resistant black ASA with an IP65 environmental rating.
A kit to allow panel mounting of the displays is also available.
Applications that can use these displays include weighing, counting (rate, total and grand total), time and temperature displays including high precision real time clocks or as remote displays with serial input - RS232, RS485, serial current loop or synchronous serial interface (SSI).
Calibration and setup are achieved using pushbuttons and no special tools are required.
The five- and six-digit displays have the pushbuttons on the faceplate and the four-digit display has the setup buttons on the main board.
Displays with four or six "flip" digits are also available.
The digits are 39mm high with a visibility rating of 18m.
These displays are ideal for use in high ambient light levels.
They are not available for all applications.
• Amalgamated Instrument Co: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
