Product category:
Plantwide control
News Release from: Amplicon | Subject: Serial data analyser
Edited by the Engineeringtalk Editorial
Team on 11 May 2000
Add-on for COM-Watch 2000 serial data
analyser
Amplicon has introduced an add-on for its popular COM-Watch 2000 serial data analyser, called the COM-Watch 2000 windows analyser.
Amplicon has introduced an add-on for its popular COM-Watch 2000 serial data analyser, called the COM-Watch 2000 windows analyser The new add-on allows data to be locally analysed on the same PC where it was collected, or to be saved to disk and analysed separately
This article was originally published on Engineeringtalk on 22 Feb 2000 at 8.00am (UK)
Related stories
"Plug and Play" PCI Analogue Output Boards
The PCI224 and PCI234 PCI bus analog output boards are high performance plug and play boards costing less than most comparable "low-cost" boards.
The add-on runs on all 32 bit Windows O/S, 95, 98, NT and 2000.
COM-Watch 2000 is low cost and easy to use on desk top or lap top PC's.
It may monitor data passively or collect actively.
This means that when in passive mode it is listening to two other devices communicate, or in active mode it is actually part of the communications system.
The software also works with several COM-Watch files simultaneously, and is able to handle files in excess of 10MB.
The windows analyser is compatible with Amplicon serial communications interfaces and PC boards.
The system is primarily used for fault finding and debugging of any RS232, 422 or 485 serial communications network; ATM networks, EPOS, SCADA and distributed control systems, with main customers being in areas such as telecommunications, system integration, process measurement and control, instrumentation manufacture and electrical control equipment.
• Amplicon: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
