Robust depth sensor can be used to 100 metres
Applied Measurements' P9911 series submersible depth sensor is available in ranges from 2 to 100 metres water gauge and provides an industry standard 4-20mA output.
Applied Measurements' P9911 series submersible depth sensor is available in ranges from 2 to 100 metres water gauge and provides an industry standard 4-20mA output.
The all stainless steel sensor offers great flexibility, with its two piece body design providing ease of access to the zero and span potentiometers and 5 to 1 turn down switches, allowing full field adjustability.
The two halves of the unit are simply bolted together using six Allen screws and sealed by means of an 'O' ring.
This, together with an IP68 sealed polythene cable outlet, completes the high integrity waterproof assembly which maintains full sealing to a depth of over 100 metres.
Both the sensor and electronics are protected against the effects of lightening strikes offering distinct advantages over competitive products.
The P9911 is fully temperature compensated and is ideal for long term bore hole monitoring.
Options include extended temperature ranges and alternative body materials for use in chemical and seawater applications.
Not what you're looking for? Search the site.
Tel +44 118 981 7339
-
Strain gauge technology enhances LVDT sensors
Applied Measurements is now able to provide AML-SGD products with the ability to measure linear displacement over an extended range. -
Digiforce provides non-contact tension measurement
Applied Measurements has developed a low-cost device to rapidly and accurately measure tension in pre-stressed wire and cable. -
Bolt-on strain sensors detect stresses
Applied Measurements' Boss bolt-on strain sensors can be attached directly to steel structures, including wind turbines, and are capable of detecting tensile, compressive and bending stresses. -
Applied Measurements provides customised load pins
Applied Measurements is offering a range of load measuring pins that can be designed and customised to suit almost any existing mechanical arrangement. -
LVDT sensors available on four-week delivery
Applied Measurements offers three main types of stainless-steel LVDT sensor: Miniature (AML/M); Economy (AML/E) and Industrial (AML/IE) versions.
Browse by category
- Consultancy and Services (786)
- Machine Building (4640)
- Engineering Design Software (6719)
- Drives, Motors and Controls (3486)
- Small Mechanical Components, Joining, Tools (2087)
- Control and Instrumentation (5225)
- Monitoring, Measurement and Quality (5762)
- Electrical and Electronic Equipment Design (4404)
- Materials and Processing (3059)
- Engineering Industry News, Resources (3596)
- Powertrain Design (3750)
- Capital Equipment (3545)
- Sensors (7514)
- Accelerometers and Vibration Sensors (465)
- Loadcells, Force Sensors, Torque Sensors (750)
- Pressure sensors (665)
- Flowmeters and Flow Sensors (655)
- Level Sensors and Leak Detectors (552)
- Linear Position Sensors (440)
- Rotary Position, Tilt and Angular Sensors (583)
- Proximity Sensors (719)
- Gas, Chemical, Radiation, Magnetic Sensors (296)
- Humidity and Environmental Sensors (159)
- Temperature sensors (635)
- Vision and Colour Sensors (1477)
- Barcode Sensors (103)
- Valves, Pumps, Process Hardware (3801)

