Product category:
Enclosures and Equipment Cooling Fans
News Release from: APW Enclosure Solutions | Subject: MasterSwitch power management module
Edited by the Engineeringtalk Editorial
Team on 22 August 2000
Masterswitch provides remote power
control
The latest network-enabled ancillary product for the IMserv family of server racks is the 8-way MasterSwitch, an intelligent power management module providing complete SNMP management capability
The latest network-enabled ancillary product for APW Electronics' IMserv family of server racks is the 8-way MasterSwitch, an intelligent power management module providing complete SNMP management capability Web enabled, the stand-alone or 1U 19" rack-mountable module is able to control the power to eight separate AC loads
This article was originally published on Engineeringtalk on 21 Oct 2005 at 8.00am (UK)
Related stories
Enclosures shield in noisy environments
Enclosure Solutions has introduced the Verak EMC range, which provides more than 80dB attenuation at 100MHz.
Multifunction enclosure has many homes
The Image 620 is a versatile multifunction enclosure, equally at home in the networking environment as it is in the broadcast, electronics and security markets.
Typically located between the APW UPS and the powered equipment, MasterSwitch enables systems to be sequentially powered up on boot, avoiding high inrush currents; conversely, in the event of a power failure, it can shut down the equipment in priority order, extending server run time when on battery back-up by switching off ancillary equipment.
Fully integrated into the host network, it can be accessed and controlled using any standard browser through the intuitive, low bandwidth GUI, security enabled to HTTP 1.0 password standard, either over the local Intranet or remotely via the Internet.
When used with an APW UPS it is intrinsically SNMP enabled, using the versatile SmartSlot expansion module capability to provide the Web capability and SNMP management interface on a single plug-in board.
A built-in Ethernet port gives direct network connection; if Bootstrap Protocol (bootp) is enabled on the host network, a TCP/IP address is assigned automatically.
Alternatively, an RS232 port enables it to be controlled via a remote terminal for out-of-band or offline configuration and diagnostics.
Each of the eight power outlets can be switched without affecting any of the other sockets, and the total load rating is 10A @ 230VAC.
• APW Enclosure Solutions: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
