Product category:
Fasteners, threaded and non-threaded
News Release from: PEM Europe | Subject: PEM Type PFF floating panel fasteners
Edited by the Engineeringtalk Editorial
Team on 08 January 2004
Panel fasteners compensate for
misalignment
The newest type of PEM panel fastener available from Arconix is designed to compensate for mating hole misalignment up to 1.52mm and can be installed into any type of panel material.
The newest type of PEM panel fastener available from Arconix is designed to compensate for mating hole misalignment up to 1.52mm and can be installed into any type of panel material PEM Type PFF floating panel fasteners feature fully captive steel screws in thread sizes M5 and M6 and in varying lengths
This article was originally published on Engineeringtalk on 20 Oct 2000 at 8.00am (UK)
Related stories
Standoffs for stainless steel too thin to tap
Arconix/UK has introduced a new range of PEM self-clinching standoffs in thread sizes M3 to M5, specially designed for installation in stainless steel as thin as 1mm.
They use a washer for easy installation with a flared punch into sheets as thin as 0.79mm.
Once installed, the panel fasteners allow for radial float in an assembly.
PEM Type PFF panel fasteners feature a standard slot/Phillips drives (or optional six-lobe drives) with a standard black ABS plastic moulded-through knob.
The knob has external lobes to enable operation by hand as well as by tool.
An aluminium retainer and spring-action plastic "fingers" allow the knob to be held in a retracted position.
Optional knob colours (red, yellow, green, orange, blue and violet) will not flake off and can be specified for colour-coding/matching.
The panel fastener assemblies can also be ordered with optional UL94V0 knobs.
PEM floating panel fasteners join a growing family of PEM threaded access hardware products.
• PEM Europe: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

