Product category:
Fasteners, threaded and non-threaded
News Release from: Arnold and Shinjo | Subject: Schalmutter high-strength nut
Edited by the Engineeringtalk Editorial
Team on 07 June 2007
High-strength nut offers easy
installation
The Schalmutter high-strength nut has a very high load bearing area on both sides of the panel.
Arnold and Shinjo has developed the Schalmutter high-strength nut The installation process consists of two very simple operations
This article was originally published on Engineeringtalk on 11 Aug 2004 at 8.00am (UK)
Related stories
Piercing nut system speeds fastening operations
In a single operation, the Pias piercing nut system stamps a hole and connects the fastening element with the sheet metal.
The first operation peels metal from the shank of the nut using a very simple cutting tool.
The second operation compresses the peeled metal, forming a very high strength flange.
The Schalmutter has a very high load bearing area on both sides of the panel.
It can be installed in any material thickness.
A bespoke design for each application means that the Schalmutter is made to the particular requirements of a customer's application.
It requires only very simple, low-cost installation tooling, which can be used on all types of power presses.
It offers very high torque and bending moment performance due to its load bearing characteristics.
It also eliminates the need for welded nuts and all their associated problems of cost and environmental/operational pollution.
• Arnold and Shinjo: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

