Latest news on Engineeringtalk categorised by supplier
ATC Semitec
Address:
Unit 14, Cosgrove Business Park
Daisy Bank Lane, Anderton
Northwich
CW9 6FY
UK
Telephone: (UK) +44 1606 871680
http://www.atcsemitec.co.uk
Our RSS feed for news from ATC Semitec
Request to receive our free email newsletter each week
Listing of all 10 news releases from ATC Semitec:
Temperature sensors seal out the environment
ATC Semitec has developed a range of TPE encapsulated sensors where the leads and sensor are made from the same material.
News from ATC Semitec ( 8 February 2008)
Small sensor suits medical applications
The Fmicro is based on one of the SeMitec's smallest FT thermistors encapsulated in a polyamide tube and fitted with 38AWG insulated leads.
News from ATC Semitec (11 October 2007)
Thermostats avoid drift
Matsuo thermostats can be easily incorporated into trace-heating systems and are available with accuracies as small as +/-1.5K with differentials down to 3K+/-1K.
News from ATC Semitec (26 July 2007)
Disc thermostats handle high temperatures
The PEPI disc series of disc thermostats are capable of switching up to 16A/250VAC and approved to the latest EN 60 730 standards.
News from ATC Semitec (26 April 2007)
Thermal cutout has high capacity
A new thermal cutout answers industrial demands for small-format high-capacity thermal protection.
News from ATC Semitec ( 3 February 2006)
Thermal sensor clips on the pipe
The CH series pipe-clip thermal sensor uses the latest NTC thin-film technology.
News from ATC Semitec ( 7 October 2005)
Ring terminal sensor has improved design
When Semitec developed a new surface-mounting ring terminal sensor using its latest AP series NTC thermistor, the company wanted to improve on a couple of aspects of its existing all-plastic design.
News from ATC Semitec ( 7 July 2005)
Two strips improve thermostat reliability
The unique twin-bimetal system of a Matsuo thermostat creates a control that over its long cycle-life, helps to minimises drift and deviation.
News from ATC Semitec (13 May 2005)
Thermistor borrows from platinum sensor technology
In trying to find a new cost-effective, manufacturing method to produce fast-response, high temperature NTC thermistors, Semitec has turned to platinum sensor technology.
News from ATC Semitec (20 April 2005)
NTC thermistors are interchangeable
Devices in the AP Series of interchangeable NTC thermistors can readily be replaced by another of the same quality, without the need for instrument recalibration.
News from ATC Semitec (18 March 2005)
