Product category:
Electrical and Electronic Testing and PAT Equipment
News Release from: Megger | Subject: LT300
Edited by the Engineeringtalk Editorial
Team on 06 November 2006
High-current loop tester is approved for
Cat IV
The LT300 high-current loop tester has already been approved for use by a significant number of UK utility companies.
Currently the only instrument of its type which is certified suitable for high-energy Category IV 300V applications, as defined by IEC 61010-1, Megger's new LT300 high-current loop tester has already been approved for use by a significant number of UK utility companies Using the CAT IV certified LT300 eliminates the need for health and safety concession notes or detailed guidance instructions which have, in the past, been required in certain applications to allow the use of inappropriate products because only CAT III instruments were available
This article was originally published on Engineeringtalk on 23 Jul 2004 at 8.00am (UK)
Related stories
Safety first for earth-impedance loop testers
A test option guaranteed not to trip RCDs and safe operation even if accidentally connected to a live three-phase supply, are among the key benefits of the LT300 range of earth-impedance loop testers.
Handheld testers star in catalogue
No fewer than 50 instruments, ranging from insulation and continuity testers to LCR test sets, are featured in the new handheld product catalogue from Megger.
In addition, the LT300 is three-phase safe, which overcomes the problem of accidental damage.
These features save time and money, while ensuring that the highest standards of safety are maintained.
The low-cost LT300 is a cost-effective and dependable choice for all energy supply, industrial and trackside applications where RCDs are not used.
Further reading
Fibre-optic testing now easier to perform
Fast, comprehensive testing of fibre-optic installations is now easier to perform with the latest range of low-cost Megger fibre-optic light sources and power meters
Save time in locating faults in power cables
Savings in time and money can be made on locating faults in power cables - particularly if they are buried or otherwise inaccessible - by using the latest hand-held time-domain reflectometers
Suitable for single-phase and phase-to-phase loop testing, it employs a test current of 30mA, and offers a choice of two loop impedance ranges - 0 to 20ohm with a resolution of 0.01ohm, and 0 to 200ohm with a resolution of 0.1ohm.
The LT300 is exceptionally easy to operate.
Users simply select the required impedance range, connect the instrument and initiate the test by pressing a button.
The result is shown almost instantly on large clear display which is easy to read, even under difficult lighting conditions.
Designed for maximum versatility without the need for complicated settings or adjustments, the instrument covers the voltage range 50 to 550V, and is suitable for use at frequencies from 16Hz, found in some traction applications, right up to the 400Hz systems used in temporary site supplies.
Megger's new LT300 high-current loop testers are offered in two versions.
The LT300-EN-00 is supplied with a standard two-wire lead set for general applications, whereas the LT300-EN-BS is supplied with a UK mains plug lead set.
Both types are supplied with a case and a calibration certificate.
Optional accessories include fused lead sets to allow users to comply with internal safety standards.
Also available from Megger are the LT310 and LT320 low-current loop testers which are guaranteed not to trip RCDs rated at 30mA or 6A MCBs on split-supply lighting circuits.
Certified for Category III 300V use, these models are particularly suitable for carrying out tests in residential and commercial premises.
Developed in close consultation with electrical contractors, all Megger loop testers are easy to hold and use, even under difficult on-site conditions.
They have a robust rubber case with a built-in lid to protect the display, ensuring that they are easily able to withstand the rigours of day-to-day use.
In addition, the instruments are IP54 ingress protection rated, indicating that they are exceptionally well protected against the entry of dust and water. Request a free brochure from Megger ...
• Megger: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
