Product category:
Bearings
News Release from: Acorn Industrial Services | Subject: SKF actuators
Edited by the Engineeringtalk Editorial
Team on 26 October 2007
Actuator makes huge structure move
Gillingham had to specify an actuator which would be powerful enough to move the giant's massive limbs and which could effectively mimic human movement in terms of speed and smoothness.
The biggest animotronic structure of its kind ever built has been created with the help of Acorn Industrial Services and its linear specialist, Simon Gillingham The 8m-high animated replica of a famous American footballer was unveiled in Trafalgar Square ten weeks after construction began
This article was originally published on Engineeringtalk on 20 Jun 2002 at 8.00am (UK)
Related stories
Probably the smallest ever flexible shaft coupling
Using the formidable Heli-Cal flexure product Abssac has recently produced a fully functional 3mm-diameter flexible shaft coupling for a medical application.
Vegetable-based oil increases tool life
Replacing conventional coolants with nontoxic Microlube has greatly improved working conditions and increased tool life at Dales Engineering Services at Peterhead, Aberdeenshire.
Weighing over a tonne, the animatronic's moving limbs posed a real problem for the designers.
Originally hydraulics were considered, but the additional ancillary equipment needed to operate the system would have created additional concerns.
Artem looked at using electric actuators, which offered a much simpler solution.
Acorn Industrial Services was approached and Simon Gillingham of its Linear division was asked if he could help Artem.
Gillingham had to specify an actuator which would be powerful enough to move the giant's massive limbs and which could effectively mimic human movement in terms of speed and smoothness.
A joint meeting was held with Artem's design team, SKF Linear Motion and Acorn Industrial Services and all concerns were identified and a solution proposed.
A linear actuator from SKF's range provided the performance and dimensions required for the animated man.
The huge replica needed over fifteen actuators for it to move its giant head, arms, legs and feet in a life-like motion.
A key factor in the supply of the actuators was the lead time.
The animatronic had to be ready prior to the game between Miami Dolphins and the New York Giants at the Wembley stadium on 28th October 2007, so delivery was critical.
The actuators were needed within two weeks of ordering.
• Acorn Industrial Services: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
