Product category:
Rotary Position, Tilt and Angular Sensors
News Release from: BEI Technologies | Subject: Encoder Test Module
Edited by the Engineeringtalk Editorial
Team on 08 November 2001
New range of DIN rail accessories for
encoders
BEI Technologies' new DIN rail mountable interface units are for use with all types of incremental encoder and comprise an Encoder Test Module, Optical Isolator and Galvanically Isolated Barrier
The Industrial Encoder Division of BEI Technologies is introducing a range of DIN rail mountable interface units for use with all types of incremental encoder Comprising an Encoder Test Module, Optical Isolator and Galvanically Isolated Barrier, each unit is designed to fit industry standard, EN50 022 DIN rail (35 x 7.5 mm)
This article was originally published on Engineeringtalk on 9 Feb 2001 at 8.00am (UK)
Related stories
Two-axis positioning with voice-coil actuators
BEI Kimco Magnetics has a two-axis precision positioning system using a direct linear magnetic drive based on voice coil actuators which achieves sub-micron positioning with 50g+ acceleration rates
First electronic water level monitoring system?
BEI Edcliff Instruments introduces FluidTrax, an easy-to-use system for monitoring water levels in wells.
The Encoder Test Module is an easy to use encoder tester that is ideal for trouble- shooting, field-testing or incoming inspection.
The module can accept inputs from any incremental optical encoder and LEDs show the status of each channel under test.
Its flexibility and compact dimensions makes it ideal for use in portable field test equipment, or it can be permanently installed in a motor test and repair facility.
The Optical Isolator module provides total electrical isolation between the encoder and its electronics and is particularly suitable for applications where a weak signal or electrical noise caused by earthing problems, could result in error signals.
This module can also be used as a repeater to reduce signal degradation on long cable runs.
Several modules can be linked together to provide a particularly cost effective solution to distribute one encoder signal to different sub systems.
The Galvanically Isolated Barrier is designed for applications in hazardous areas and combines both power and signal barriers into a single package.
Input and output signals are galvanically isolated and do not require the use of a high-integrity earth connection.
Built-in LEDs simplify set up and testing.
Output options include differential line drivers, and the module is compatible with most counters, controllers and PLC's.
The module is rated as non-incendive and can be installed in Class 1, Division 2 areas.
The requirements of Class 1 Division 1, Group C and D (Eex ia IIB T4 CENELEC) can be met when used with correctly rated encoders.
• BEI Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

