Product category:
Compressors and Air Treatment
News Release from: Beko Technologies | Subject: Drypoint AC
Edited by the Engineeringtalk Editorial
Team on 30 May 2005
Dryer range extends to smaller tasks
Beko Technologies has extended its Drypoint AC adsorption dryer range with eight smaller sizes for flows from 10.2 to 112.2m3/h.
Beko Technologies has extended its adsorption dryer range, Drypoint AC Beko offers the new small Drypoint AC in eight sizes for flows from 10.2 to 112.2m3/h
This article was originally published on Engineeringtalk on 11 Aug 2000 at 8.00am (UK)
Related stories
Adsorption dryers cut compressed air costs
Beko's new Drypoint AC cold-regenerated adsorption dryers help prevent corrosion, rejects or damage on the production line with reduced treatment costs and increased reliability.
Dryer cleans up high-pressure supplies
The Drypoint AC HP adsorption dryer is designed to cope with the specific difficulties of high-pressure compressed air drying.
The new small Drypoint AC dryer family is constructed in an especially service-friendly way.
Beko quotes a reduced maintenance expenditure of 75% in comparison with conventional adsorption dryers.
For example: Drying material is in cartridge form, this means desiccant changes are quick and extremely easy.
Beko also promises a reduction of operating costs through the flow-optimised Clearpoint filter - this filter has very low pressure drop combined with excellent performance.
In addition, energy saving via optional software-switchable compressor control is available.
This means that during the standstill time of the compressor, no regeneration air is used - saving expensive compressed air.
The cartridges filled with drying material are designed for maximum efficiency - a spring in the cartridge prestresses the material.
In this way, the functional imperfections from bypass build up and premature wear through grinding of drying material - typical for pulsating volume flows - are avoided.
This feature also means the dryer can be mounted horizontally.
Installation and assembly can be adjusted in a flexible way to the conditions of the application.
Thus, the compressed air input can take place from the left or right and the inlet filter may be installed at the side, in front of, or behind the dryer, horizontally or vertically.
The unit itself can be wall or floor mounted.
Furthermore, the familiar large Drypoint AC dryer series is deliverable for volume flows from 135 to 1550m3/h. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
